<div dir="auto">A very wise and respected Triumph guru, Randall Young, once told me when I was planning on making my own brake lines instead of buying professionally re-made lines to save a little money that “maybe they can use the money you save to help pay for the funeral”.....I bought pre-made lines! Just sayin’</div><div dir="auto"><br></div><div dir="auto">Bill </div><div dir="auto">TR3A</div><div dir="auto">TS63273L</div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Jan 6, 2021 at 10:54 PM TeriAnn J. Wakeman <<a href="mailto:tjwakeman@gmail.com">tjwakeman@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div>First, American and British standard
brake fittings are incompatible, The British standard uses long
noses before the threaded part and American standard fittings do
not, which means a male British fitting will only screw in a
couple threads before it bottoms out and an American male fitting
will run out of threads before the end can make a seal when used
with a British standard female fitting. That said. Rovers North
sells bare fittings Other US companies may as well.</div>
<div><br>
</div>
<div>Second, good auto parts stores sells
ready made brake lines on different lengths with American
fittings. What I did was cut off one flare, replace the US
fittings with UK fittings then after bending to shape made a new
flare on the end that was cut off. If I needed longer lines than
the store had I just joined two together using a US union fitting.
I did this with both cars. The Land Rover has used my replacement
lines for about 40 years now and the TR3 for about 30 years. I
purchased my flare making kit from Eastwood.</div>
<div><br>
</div>
<div>TeriAnn<br>
</div>
<div><br>
</div>
<div>On 1/6/21 5:28 PM, Sujit Roy wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">I bought a good brake pipe flaring tool for
rebuilding some hydraulic hoses for my Stag's rack. So far I
have managed to reuse some flares.
<div>I may need some new flares but am finding them very
expensive here in USA. UK have some but shipping costs add up.</div>
<div>I need 7/16 x 20 for 1/4" tubing to make bubble flares. </div>
<div>If you make your own brake lines where do you go to get
your fittings?I bought a cu /Â nickel line kit that came with
fittings I can use. </div>
<div>Regards, Sujit<br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr" data-smartmail="gmail_signature">
<div dir="ltr">
<div>Sujit Roy<br>
Cupertino, California</div>
</div>
</div>
</div>
</div>
</blockquote>
<br>
<div>-- <br>
<p align="center"><a href="http://overlandtravel.us" target="_blank">Book - The
Essential Guide to Overland Travel in the United States and
Canada</a>
<br>
2 years to write and 38 years of travel and camping to learn
what to write<br>
<br>
<b>Because the world beckons and life waits for no one</b></p>
</div>
</div>
** <a href="mailto:triumphs@autox.team.net" target="_blank">triumphs@autox.team.net</a> **<br>
<br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/triumphs" rel="noreferrer" target="_blank">http://www.team.net/pipermail/triumphs</a> <a href="http://www.team.net/archive" rel="noreferrer" target="_blank">http://www.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/billyb62@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/triumphs/billyb62@gmail.com</a><br>
</blockquote></div></div>