<div dir="ltr">From memory:<br><br>Smaller cup washer > Plastic Hat > metal sleeve > larger cup washer.  The square o-ring is a gasket that fits between the cup washers.  Note that the smaller cup washer should have a larger hole than the larger (outer) cup washer.<br><br>Play with that and you should see pretty quickly.  See, for instance, the diagram on this page:  <a href="https://rimmerbros.com/Item--i-GRID005736">https://rimmerbros.com/Item--i-GRID005736</a><div><br></div><div>Jeff Scarbrough</div><div>Corrosion Acres, Ga.</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Nov 8, 2020 at 9:49 AM DAVID MASSEY <<a href="mailto:dave1massey@cs.com">dave1massey@cs.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div style="color:black;font:12pt Arial,Helvetica,sans-serif">
<div> <font size="3">A friend of mine must be desperate since he is asking me for advice about his Spitfire and I have almost no experience with those.  He is working on reassembling the rear trunion.  There is a plastic bushing on either side that is hat shaped.  There are two cupped washers and a rubber seal.  The bushing, sleeve and cupped washers are all self evident.  My question is about the rubber seal.  I'm thinking this seal needs to go on the OD of the hat section of the bushing but it seems to be about 1/4 inch (6mm) too small in diameter to fit around it and trying to stretch it and keep it in place is an exercise in aggravation.</font></div>

<div><font size="3"><br>
</font></div>

<div><font size="3">What has been the experience of those here who have done this and what recommendations have you?</font></div>

<div><font size="3"><br>
</font></div>

<div><font size="3">Thanks in advance.</font><br>
</div>

<div> <br>
</div>

<div style="clear:both"><font size="4">Dave </font><br>
<br>
</div>
</div>
** <a href="mailto:triumphs@autox.team.net" target="_blank">triumphs@autox.team.net</a> **<br>
<br>
Donate: <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/triumphs" rel="noreferrer" target="_blank">http://www.team.net/pipermail/triumphs</a>  <a href="http://www.team.net/archive" rel="noreferrer" target="_blank">http://www.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com</a><br>
</blockquote></div>