<div dir="ltr"><div dir="ltr">Was overthinking this, A good timing gun on the car should work..</div><div dir="ltr"><br></div><div>Sujit</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Sep 11, 2020 at 5:52 AM DAVID MASSEY <<a href="mailto:dave1massey@cs.com">dave1massey@cs.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div style="color:black;font:12pt Arial,Helvetica,sans-serif">
<div> <font size="3">Of course, if you have a running engine and a timing light you have all you need.</font><br>
</div>

<div> <br>
</div>

<div style="clear:both"><font size="4">Dave </font><br>
<br>
</div>

<div> <br>
</div>

<div> <br>
</div>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Geo Hahn <<a href="mailto:ahwahneetr@gmail.com" target="_blank">ahwahneetr@gmail.com</a>><br>
To: Sujit Roy <<a href="mailto:triumphstag@gmail.com" target="_blank">triumphstag@gmail.com</a>><br>
Cc: Triumphs <<a href="mailto:triumphs@autox.team.net" target="_blank">triumphs@autox.team.net</a>><br>
Sent: Thu, Sep 10, 2020 7:25 pm<br>
Subject: Re: [TR] can I test a distributor with the following?<br>
<br>

<div id="gmail-m_8021013173653530886yiv5663866068">
<div>
<div dir="ltr">A friend has one of these which is the best way to assess centrifugal advance...
<div><br clear="none"></div>

<div>
<div><img src="cid:1747ef0e3f7f47058ff1" alt="Sun.JPG" width="517" height="345"></div>

<div><br clear="none"></div>

<div>But I can get a pretty accurate curve by just using a timing light with an advance dial to get readings at various RPMs then plotting on a graph.</div>

<div><br clear="none"></div>

<div>
<div><img src="cid:1747ef0e3f74aba16b62" alt="Advance Curve 2.JPG" style="margin-right: 0px;" width="668" height="515"><br clear="none"></div>
</div>

<div><br clear="none"></div>

<div>Geo </div>
</div>
</div>
<br clear="none">
<div>
<div id="gmail-m_8021013173653530886yiv5663866068yqt53704">
<div dir="ltr">On Wed, Sep 9, 2020 at 12:00 PM Sujit Roy <<a rel="nofollow" shape="rect" href="mailto:triumphstag@gmail.com" target="_blank">triumphstag@gmail.com</a>> wrote:<br clear="none"></div>
<blockquote style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr">My son has a few ARDUINOs and Raspberry pies and a Picoscope. ( Cheap oscilloscope probes which works with a PC). Are there any suggestions if any of these can be used to test the centrifugal parts of a distributor and how?<br clear="none">I do have a timing gun.<br clear="none"><br clear="none">Sujit<br clear="all">
<div><br clear="none"></div>
-- <br clear="none">
<div dir="ltr">
<div dir="ltr">
<div>Sujit Roy<br clear="none">Cupertino, California</div>
</div>
</div>
</div>
</blockquote></div>
</div>
</div>
</div>
<br>
</div>
</div>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div>Sujit Roy<br>Cupertino, California</div><div><br><a href="https://triumphstagblog.wordpress.com/" target="_blank">https://triumphstagblog.wordpress.com/</a><br><br></div></div></div></div>