<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div dir="ltr">I was looking for similar hoses for an MGB. I found that Gates makes universal right angle hoses, different sizes and lengths. However I haven’t followed up on it so that’s all I have.</div><div dir="ltr"><br></div><div dir="ltr"> Don’t think removal is a good idea. On the MGB it’s a fuel evaporation system with a non-vented gas tank and the SU fuel bowl overflow is piped back to the canister. I also have a TR4 with tank vented to air and float bowl overflow spilling to engine compartment and ground (if it doesn’t reach the exhaust first).</div><div dir="ltr"><br></div><div dir="ltr">Allen </div><div dir="ltr"><br><blockquote type="cite">On Aug 26, 2020, at 12:13 PM, Sujit Roy <triumphstag@gmail.com> wrote:<br><br></blockquote></div><blockquote type="cite"><div dir="ltr"><div dir="ltr"><div>I need to get some hoses for my Stag. I don't think they are available. <br></div><div>This is from a TR6 and the hoses are similar to hoses 27 and 29.</div><div>The canister in the Stag sits quite high under the hood and I'd like to get preformed 90 degree angled hoses. Are the hoses for the TR6 performed? If so, then TRF probably has the correct ones. Can someone confirm?</div><div><br></div><div>Regards, Sujit </div><div><br></div><div><br></div><div><br></div><div><div><div><canister.jpeg></div><br></div></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Sujit Roy<br>Cupertino, California</div><div><br><a href="https://triumphstagblog.wordpress.com/" target="_blank">https://triumphstagblog.wordpress.com/</a><br><br></div></div></div></div>
</div></blockquote></body></html>