<div style="color:black;font: 12pt Arial, Helvetica, sans-serif;">
<div> <font size="3">I've heard of people adding a second compression sleeve (acorn) cut in half to achieve the desired length. I haven't tried it myself since I got mine to seal up with the standard sleeve but if I had an issue that would have been my next step.</font><br>
</div>
<div> <br>
</div>
<div style="clear:both"><font size="4">Dave </font><br>
<br>
</div>
<div> <br>
</div>
<div> <br>
</div>
<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: EDWARD WOODS <fogbro1@comcast.net><br>
To: Greg Lemon <grglmn@gmail.com>; staffel <staffel@comcast.net><br>
Cc: Triumphs <triumphs@autox.team.net><br>
Sent: Tue, Aug 11, 2020 6:01 am<br>
Subject: Re: [TR] TR4 Fuel Delivery Issue & Mod<br>
<br>
<div id="yiv6420788603">
<div>
<div style="font-size:12pt;font-family:helvetica, arial, sans-serif;color:#333333;">
And isn't it the brass "acorn" that seals the connection at the pump, not the threads? ISTR that the original "acorn" is a bit longer than the replacements available which limits compression and can cause a leak. At one time there was someone making a longer "acorn" to solve this problem.
</div>
<div style="font-size:12pt;font-family:helvetica, arial, sans-serif;color:#333333;">
<br clear="none">
</div>
<div style="font-size:12pt;font-family:helvetica, arial, sans-serif;color:#333333;">
Ed Woods
</div>
<blockquote type="cite">
<div class="yiv6420788603yqt9459021822" id="yiv6420788603yqtfd34247">
<div>
On 08/10/2020 11:57 PM Greg Lemon <grglmn@gmail.com> wrote:
</div>
<div>
<br clear="none">
</div>
<div>
<br clear="none">
</div>
<div>
Just a couple random thoughts here. One, I could not figure out from your message where exactly you ended up putting the electric pump. My understanding is most electric pumps like to push better than the like to pull, MG and Healey pumps are mounted close to the tank and low in back, that would be a good place for the new TR electric pump. You seem somewhat concerned about originality.
<div>
<br clear="none">
</div>
<div>
Second, mechanical pump rebuild kits are readily available and not too hard to fit. There are lots of things I remember about rebuilding my TR ten years ago, rebuilding the pump is not one of them, so it must have been fairly easy to do and worked (and has been working fine for ten years).
</div>
<div>
<br clear="none">
</div>
<div>
Good Luck
</div>
<div>
<br clear="none">
</div>
<div>
Greg Lemon
</div>
<div>
TR250
<br clear="none">
<div>
<br clear="none">
</div>
<div>
<br clear="none">
</div>
</div>
</div>
<br clear="none">
<div class="yiv6420788603gmail_quote">
<div class="yiv6420788603gmail_attr" dir="ltr">
On Mon, Aug 10, 2020, 10:43 PM staffel <
<a rel="nofollow" shape="rect" ymailto="mailto:staffel@comcast.net" target="_blank" href="mailto:staffel@comcast.net">staffel@comcast.net</a>> wrote:
<br clear="none">
</div>
<blockquote>
<div>
<div>
<br clear="none">
</div>
<div>
<div>
<span style="font-family:sans-serif;">Several years ago on an evening club drive in the Catoctin Mts of Maryland my TR4 developed running/ hesitation issues. Then it got dark & started to rain. Could not drive the car steady over 45mph. Typical fuel flow clogging issue symptoms. Fortunately we made it into Fredericksburg and a Motel.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Next morning, still raining, the issue was apparent: in the bottom of the Glass fuel bowl- a pile of 'rust dust'. Cleaned the bowl & nursed the car home 30 miles, but it kept dying. Fortunately a Jag club friend came by and got his trailer & towed me home.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Further examination determined sediment also in the CD carbs fuel bowls. So much for the fuel pump 'screen' being 'effective'.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Also examination of the fuel pump (original) revealed a weak diaphragm, so while working on the carbs, ordered a new pump from TRF. </span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">A few months later got everything back together. The engine started right up & ran fine. But no matter how I tried to seal the threads on fuel feed of the original curved pipe inlet 'nut' to the new pump ( pipe dope, teflon tape, rtv) the leak wouldn't stop. </span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Magnifying glass exam of the original Triumph Male pipe 'nut' and the female threaded bore of the new TRF pump revealed a slight thread mismatch - Chinese machining. It was not Metric either. </span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">So after talking with TRF, I decided to forget the mechanical pump and install an electric pump, ala Jaguar V12s & Jensen Healey / GTs (Lotus 907).</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Well, I installed a couple of different new electric pumps adjacent to the mechanical pump.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">They would never 'self prime'. </span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Now, returning to the project. I removed the mechanical pump, & DRAINED the tank of the old fuel. It seems that the gravity feed when the tank is less than 1/2 full requires the elec pump to be very low ( like the original input height of the original pump, to receive fuel. </span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">So I am redetailing the frame (cleaning & new paint) and securing the new fuel line, inline glass Filter & elec pump right on the frame. This allows the steel feed line from the tank ( after Dremel Tool cutting) to match the new location of the electric pump.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Next will be modifying a new copper fuel line ( semblance of originality) to meet the elec pump feed right behind & adjacent to the Water pump. The original copper pipe mated to the back of the mechanical pump , ran up and forward along the engine at the cylinder head level to the front of the engine & then across to the carburetor feeds.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Finally hope this resolves the fuel delivery issue.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">I wanted to share a warning about the TRF pump supplier manufacturing glitch. So others can not waste years getting their TRs back to Roadworthy status.</span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
<span style="font-family:sans-serif;">Obviously not going to drive a car with weeping fuel near a hot engine. At least on the TR4 & 6s, ( unlike Jaguar 6s ( have 2) or V12s ( have 3), Jensen GTs ( have 3) ; the exhaust Manifolds are on the opposite side of the engine. </span>
</div>
<div>
<span style="font-family:sans-serif;"><br clear="none"></span>
</div>
<div>
Sherman D Taffel
</div>
<div>
Columbia MD and Goldvein VA
</div>
<div>
65 TR4 CT 50054L
</div>
<div>
( per VTR the last known TR4 produced & shipped to USA)
</div>
<div>
<br clear="none">
</div>
<div>
<br clear="none">
</div>
<div id="yiv6420788603m_-6070975799002559859composer_signature">
<div style="font-size:85%;color:#575757;">
Sent via the Samsung Galaxy S10, an AT&T 5G Evolution capable smartphone
</div>
</div>
<div>
<br clear="none">
</div>
</div>
<div>
<br clear="none">
</div>
<div>
<br clear="none">
</div>
<div id="yiv6420788603m_-6070975799002559859composer_signature">
<div style="font-size:85%;color:#575757;">
Sent via the Samsung Galaxy S10, an AT&T 5G Evolution capable smartphone
</div>
</div>
<div>
<br clear="none">
</div>
</div>
**
<a rel="nofollow" shape="rect" ymailto="mailto:triumphs@autox.team.net" target="_blank" href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **
<br clear="none">
<br clear="none">Donate:
<a rel="nofollow" shape="rect" target="_blank" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
<br clear="none">Archive:
<a rel="nofollow" shape="rect" target="_blank" href="http://www.team.net/pipermail/triumphs">http://www.team.net/pipermail/triumphs</a>
<a rel="nofollow" shape="rect" target="_blank" href="http://www.team.net/archive">http://www.team.net/archive</a>
<br clear="none">
<br clear="none">Unsubscribe/Manage:
<a rel="nofollow" shape="rect" target="_blank" href="http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com">http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com</a>
<br clear="none">
</blockquote>
</div>
** triumphs@autox.team.net **
<br clear="none">
<br clear="none">Donate: http://www.team.net/donate.html
<br clear="none">Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
</div>
<br clear="none">
<br clear="none">Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fogbro1@comcast.net
<div class="yiv6420788603yqt9459021822" id="yiv6420788603yqtfd71233"><br clear="none">
</div>
</blockquote>
<div class="yiv6420788603yqt9459021822" id="yiv6420788603yqtfd54768">
</div>
</div>
</div>
<div class="yqt9459021822" id="yqtfd76368">** <a shape="rect" ymailto="mailto:triumphs@autox.team.net" href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **<br clear="none"><br clear="none">Donate: <a shape="rect" href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br clear="none">Archive: <a shape="rect" href="http://www.team.net/pipermail/triumphs" target="_blank">http://www.team.net/pipermail/triumphs </a> <a shape="rect" href="http://www.team.net/archive" target="_blank">http://www.team.net/archive</a><br clear="none"><br clear="none">Unsubscribe/Manage: <a shape="rect" href="http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com" target="_blank">http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com</a><br clear="none"></div>
</div>
</div>