<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div></div><div>Dave, I'll do your apron, you rewire my steering shaft :)</div><div><br>On May 22, 2020, at 9:50 PM, David Friedlander <<a href="mailto:forzion7@gmail.com">forzion7@gmail.com</a>> wrote:<br><br></div><blockquote type="cite"><div><div dir="auto">Andrew ~ <div dir="auto"><br></div><div dir="auto">Art tells me he can remove the apron of his car in 30 minutes! That's some mighty fast wrenching!!<div dir="auto"><br></div><div dir="auto">Dave</div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, May 22, 2020, 7:00 PM Art McEwen <<a href="mailto:amcewen2@cogeco.ca">amcewen2@cogeco.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="auto"><div></div><div>I've almost got him convinced to take it off :)</div><div><br>On May 22, 2020, at 6:32 PM, andrew uprichard <<a href="mailto:auprichard@uprichard.net" target="_blank" rel="noreferrer">auprichard@uprichard.net</a>> wrote:<br><br></div><blockquote type="cite"><div><div><p class="MsoNormal"><span style="font-family:"Times New Roman",serif;color:#1f497d">Ask David Friedlander if it can be done without removing the front apron. I think he has just spent several days lying under his TR3 trying to get his steering right.<u></u><u></u></span></p><p class="MsoNormal"><span style="font-family:"Times New Roman",serif;color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-family:"Times New Roman",serif;color:#1f497d">Andrew Uprichard<u></u><u></u></span></p><p class="MsoNormal"><span style="font-family:"Times New Roman",serif;color:#1f497d"><u></u> <u></u></span></p><div style="border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b>From:</b> Art McEwen <<a href="mailto:amcewen2@cogeco.ca" target="_blank" rel="noreferrer">amcewen2@cogeco.ca</a>> <br><b>Sent:</b> Friday, May 22, 2020 9:35 AM<br><b>To:</b> andrew uprichard <<a href="mailto:auprichard@uprichard.net" target="_blank" rel="noreferrer">auprichard@uprichard.net</a>>; <a href="mailto:triumphs@autox.team.net" target="_blank" rel="noreferrer">triumphs@autox.team.net</a><br><b>Subject:</b> RE: [TR] Tr3a steering tight after rebuild<u></u><u></u></p></div><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Further update. <u></u><u></u></p><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">So I think what happened is my final torque down of the end cap on the steering box was tighter than my shim bench tests or something settled during that and caused binding. When I took it all off and reset everything with a McGiver'd way of measuring the float it all seemed good on 2nd install. The new bushings/felt in the upper shaft added some stiffness too.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">BTW some claim this can be done without removing the cowl (and therefore presumably the rad), I'd pay good money to see that on youtube....<br><br>On 05/17/20, <b>andrew uprichard </b><<a href="mailto:auprichard@uprichard.net" target="_blank" rel="noreferrer">auprichard@uprichard.net</a>> wrote:<u></u><u></u></p><blockquote style="border:none;border-left:solid blue 1.0pt;padding:0in 0in 0in 10.0pt;margin-left:0in;margin-top:5.0pt;margin-bottom:5.0pt"><div><p class="MsoNormal" style="margin-bottom:12.0pt">(Where is Randall when you need him? <span style="font-family:"Segoe UI Emoji",sans-serif">😊</span>)<br><br>When you say "significantly tighter" is this turning the steering with the tie rods connected ? You should be able to turn the steering wheel with a finger tip if the car is in the air. You should also be able to grab a wheel and take it through its full range of motion (everything connected) fairly easily.<br><br>The felt at the steering wheel should not be an issue - and, if anything, should just be soaked in oil prior to installation. <br><br>If it is binding, and not eased by loosening the box (and, by inference, the pressure on the peg) it is probably related more to the shims at the bottom of the box than the bearings themselves. Did you follow the method Randall suggests with measuring end-float and shimming appropriately?<br><br>Andrew Uprichard<br>Jackson, Michigan<br><br>-----Original Message-----<br>From: Triumphs <<a href="mailto:triumphs-bounces@autox.team.net" target="_blank" rel="noreferrer">triumphs-bounces@autox.team.net</a>> On Behalf Of Art McEwen<br>Sent: Sunday, May 17, 2020 2:11 PM<br>To: <a href="mailto:triumphs@autox.team.net" target="_blank" rel="noreferrer">triumphs@autox.team.net</a><br>Subject: [TR] Tr3a steering tight after rebuild<br><br>Re-installed my rebuilt steering box and, even though it felt fine on the bench, back in the car the steering is significantly tighter. Not quite a parking lot 3-point turn level of effort but well beyond finger tip effort. And this is while still up on jacks with the set screw backed right off. I loosened off the shim cover bolts thinking I was too tight but no difference. It doesn't feel like it's binding at any point of the travel, it's tight lock to lock. I waited until the shaft was reassembled before tightening the box attachment bolts so the box would align to the shaft, not vice versa.<br><br>Could this really all be down to resistance from the 2 new bearings in the split shaft (plenty of grease added) and the new felt at the steering wheel? <br><br>Also should the upper felt be greased/oiled?<br><br>Thanks,<br><br>Art. 60tr<br>** <a href="mailto:triumphs@autox.team.net" target="_blank" rel="noreferrer">triumphs@autox.team.net</a> **<br><br>Donate: <a href="http://www.team.net/donate.html" target="_blank" rel="noreferrer">http://www.team.net/donate.html</a><br>Archive: <a href="http://www.team.net/pipermail/triumphs" target="_blank" rel="noreferrer">http://www.team.net/pipermail/triumphs</a> <a href="http://www.team.net/archive" target="_blank" rel="noreferrer">http://www.team.net/archive</a><br><br>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net" target="_blank" rel="noreferrer">http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net</a><u></u><u></u></p></div></blockquote></div></div></div></blockquote></div></blockquote></div>
</div></blockquote></body></html>