<div style="color:black;font: 12pt Arial, Helvetica, sans-serif;">
<div> <font size="4">Did you get the throttle plate centered?  If it is not centered it will hit the throat on one side while there is still a big gap on the other.  </font><br>
</div>

<div> <br>
</div>

<div style="clear:both"><font size="4">Dave </font><br>
<br>
</div>

<div> <br>
</div>

<div> <br>
</div>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Bob Leaver <boleaver@gmail.com><br>
To: Triumphs@autox.team.net<br>
Sent: Tue, May 12, 2020 4:58 pm<br>
Subject: [TR] fast idle problem<br>
<br>

<div dir="ltr">I have a 1965 Triumph TR4a that I rebuilt the SU carbs and now I can't<br>
</div>

<div dir="ltr">get the idle below about 1500. I've tried all the screws and checked<br>
</div>

<div dir="ltr">all gaskets and nothing. The only possibility I can come up with is<br>
</div>

<div dir="ltr">air getting around the shafts. When rebuilding the cars I didn't<br>
</div>

<div dir="ltr">replace the shafts because I didn't have a reamer. Moss has a reamer<br>
</div>

<div dir="ltr">for $290.00. I looked on line and can't find a less expensive<br>
</div>

<div dir="ltr">replacement. The book states the size of the reamer is 5/16" +<br>
</div>

<div dir="ltr">0.0105". What kind of measurement is this? Can you use a 5/16" reamer?<br>
</div>

<div dir="ltr">Does anyone have ideas how I can get the idle down? Does anyone know<br>
</div>

<div dir="ltr">of a cheaper reamer to use? Thanks, Bob<br>
</div>

<div dir="ltr">** <a ymailto="mailto:triumphs@autox.team.net" href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Donate: <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br>
</div>

<div dir="ltr">Archive: <a href="http://www.team.net/pipermail/triumphs" target="_blank">http://www.team.net/pipermail/triumphs </a> <a href="http://www.team.net/archive" target="_blank">http://www.team.net/archive</a><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com" target="_blank">http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com</a><br>
</div>
</div>
</div>