<div dir="auto">Summer is upon us here in sunny Florida and the '3 is going into its annual hibernation.  (we have had 20 straight days of 90+ temps.  hardly any rain to cool us off)<br><br></div>
<div dir="auto">Has anyone set up an exhaust extension system so that you can work on the car in the garage? <br><br></div>
<div dir="auto">My thoughts are to install a port in the wall that a flexible hose will be attached to on the inside and a standing pipe outside.<br><br></div>
<div dir="auto">a) what kind of flex 'pipe' is available for this purpose?  I have seen short pieces of exhaust flex pipe but not sure that would work for longer lengths.<br></div>
<div dir="auto">b) should the pipe diameter be larger than the exhaust pipe so that it doesn't create additional pressure on the system?  How much larger? That would require a reducer of some sort at the connection to the exhaust pipe.<br></div>
<div dir="auto">c) do I need to be concerned about the total length of the extension?  I think 10-12ft inside will be sufficient and would like a minimum of 8ft vertical height outside.<br><br></div>
<div dir="auto">your thoughts/suggestions will be greatly appreciated.<br><br></div>
<div dir="auto">Carl<br></div>
<div dir="auto">1960 TR3A - TS81802LO<br></div>
<div dir="auto">Tampa, FL<br><br></div>
<div dir="auto"><!-- tmjah_g_1299s -->Sent from <!-- tmjah_g_1299e --><a href="http://www.bluemail.me/r?b=15038"><!-- tmjah_g_1299s -->BlueMail<!-- tmjah_g_1299e --></a><!-- tmjah_g_1299s --> <!-- tmjah_g_1299e --></div>