<!DOCTYPE html>
<html><head>
<meta charset="UTF-8">
</head><body><p style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: rgb(51, 51, 51);">I always refer distributor issues to Jeff at Advanced Distributors. He knows distributors for British cars like no one else. His work and rebuilds are perfect. Either points or Pertronix.</p><p style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: rgb(51, 51, 51);">I don't have direct contact info handy, but Advanced Distributors is easy to find. </p><p style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: rgb(51, 51, 51);">Thanks for sharing what you have found. I'll check mine asap. I've been wanting to send Jeff a couple distributors to have a couple spares, one points and one Pertronix. I also have 2 other cars that will need fresh distributors eventually. </p><p style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: rgb(51, 51, 51);">Dave H.</p><blockquote type="cite">On May 15, 2019 at 7:57 PM TERRY SMITH <terryrs@comcast.net> wrote: <br> <br><p style="font-size: 12pt; font-family: helvetica, arial, sans-serif; color: #333333;">Thanks, Bob. That's my read as well. I'll report if the replacement I've ordered from BP North doesn't fix it.</p><blockquote type="cite">On May 15, 2019 at 10:54 PM Kinderlehrer <kinderlehrer@comcast.net> wrote: <br> <br><div class="ox-dae86b1d70-ox-7c23cf25df-WordSection1"><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal"><span style="font-size: 11.0pt; font-family: 'Calibri','sans-serif'; color: #1f497d;">I’ve had 2 of them fail with the magnets in the collar getting all askew. Doesn’t run well like that. </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal"><span style="font-size: 11.0pt; font-family: 'Calibri','sans-serif'; color: #1f497d;"> </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal"><span style="font-size: 11.0pt; font-family: 'Calibri','sans-serif'; color: #1f497d;">Bob </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal"><span style="font-size: 11.0pt; font-family: 'Calibri','sans-serif'; color: #1f497d;"> </span></p><div><div style="border: none; border-top: solid #B5C4DF 1.0pt; padding: 3.0pt 0in 0in 0in;"><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal"><strong><span style="font-size: 10.0pt; font-family: 'Tahoma','sans-serif';">From:</span></strong><span style="font-size: 10.0pt; font-family: 'Tahoma','sans-serif';"> Triumphs [mailto:triumphs-bounces@autox.team.net] <strong>On Behalf Of </strong>Randall<br><strong>Sent:</strong> Wednesday, May 15, 2019 7:45 PM<br><strong>To:</strong> TERRY SMITH; triumphs@autox.team.net<br><strong>Subject:</strong> Re: [TR] Pertronix Failure? </span></p></div></div><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal"> </p><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal" style="margin-bottom: 12.0pt;">Well, maybe. Is it loose on the point can? Or does the point cam just turn back and forth a bit?<br>Or does the whole mess move side to side?<br><br>It normal for the point cam to be able to turn slightly. But there should be no side to side play; and the plastic piece should be tight on the point cam.<br><br>Side play is usually a sign of wear in the shaft bushing. If the plastic piece is loose, its probably just time, heat and vibration vs cheap plastic.<br>-- Randall</p><div><p class="ox-dae86b1d70-ox-7c23cf25df-MsoNormal">On 15 May 2019 18:41:10 GMT-07:00, TERRY SMITH <<a href="mailto:terryrs@comcast.net">terryrs@comcast.net</a>> wrote:</p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">Okay, so I was wrong. I thought the intermittent engine miss on the TR3 had to do with a dislodged damper on the forward carb. Test drive said no, engine still stumbled, cleared, stumbled again. Changed fuel filters out because they were due anyway. Problem persisted. Checked the floats movements, all fine. Problem persisted. Finally just swapped the carbs entirely with spares that I knew worked, problem persisted. So...not fuel. If it were valves, it wouldn't be intermittent, unless a valve were sticking, right? </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;"> </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">Next up assumption is it's electrical. Swapped the distributor, wires and rotor with spares I knew worked. Problem persisted. Checked for potential electrical shorts. Nothing obvious. Yeesh! </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;"> </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">I run a Pertronix. Went online and read about Pertronix troubleshooting. Piece I read mentioned that the trigger magnet that spins on the rotor can come loose and affect the timing. I checked this and LO! The trigger magnet is indeed loose. I seem to remember when I put it on some eight or nine years ago, that it went on tight. But it now wiggles about an eighth of an inch back and forth, maybe a bit more. </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;"> </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">So question. Do I remember correctly, it's supposed to be tight? And second, what would cause it to come loose over time? </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;"> </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">I know it could still be a sticking valve, but this first. Thanks, everyone for patience with this long message. </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;"> </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">Terry Smith, '59 TR3A </span></p><p class="ox-dae86b1d70-ox-7c23cf25df-default-style"><span style="font-family: 'Helvetica','sans-serif'; color: #333333;">New Hampshire </span></p></div></div></blockquote><p style="font-size: 12pt; font-family: helvetica,arial,sans-serif; color: #333333;" class="ox-dae86b1d70-default-style"><br> </p></blockquote><p style="font-size: 12pt; font-family: helvetica,arial,sans-serif; color: #333333;" class="default-style"><br> </p><blockquote type="cite">** triumphs@autox.team.net ** <br> <br>Donate: http://www.team.net/donate.html <br>Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive <br> <br>Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net <br></blockquote><p style="font-size: 12pt; font-family: helvetica,arial,sans-serif; color: #333333;" class="default-style"><br> </p></body></html>