<div dir="ltr"><div dir="ltr">On Thu, Jan 31, 2019 at 8:59 AM Frank Fisher <<a href="mailto:yellowtr3@yahoo.com">yellowtr3@yahoo.com</a>> wrote:<br></div><div class="gmail_quote"><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div></div><div>the oil pump gasket. i seem to recall these are a dry fit with no gasket dressing. no?</div></div><a href="http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com" rel="noreferrer" target="_blank"></a></blockquote><div><br></div><div>I also use Hylomar - but I think the most common cause of seepage is dimpling of the metal around the holes from over-enthusiastic tightening in the past.</div><div><br></div><div>I used a body hammer and small dolly to flatten the holes in the lip of the pan.</div><div><br></div><div>Geo </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><a href="http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com" rel="noreferrer" target="_blank">m</a><br>
</blockquote></div></div>