<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>ditto on the attachment process, has worked well for
years...valve cover process similar</p>
<p>ptegler<br>
</p>
<div class="moz-cite-prefix">On 1/21/2019 10:40 AM, Geo Hahn wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CANzE1bFF3vO-xLQRrg9KoMOrbgBD2zKJt+qdmVYs9WQrQpw3AA@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">I used a body hammer and dolly - was pretty easy to
get them flat again. IMO a hammer blow is much more effective
than a tightening bolt will be.
<div><br>
</div>
<div>After that I installed the gasket to the pan using RTV and
set the whole works gasket-down on a sheet of glass. The
result was a sealed gasket with a very flat surface to present
to the machined bottom of the block. A non-hardening sealer
(e.g. Hylomar) will then work with that. With a bit of care
the gasket will stay with the pan upon removal and can be
re-used.</div>
<div><br>
</div>
<div>Geo</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Mon, Jan 21, 2019 at 12:16
AM Sujit Roy <<a href="mailto:triumphstag@gmail.com"
moz-do-not-send="true">triumphstag@gmail.com</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr"> The PO put gallons of sealer around the pan/
sump and over tightened all the bolts. They are all raises
and .if I put a flat rule between holes, I can notice at
least 1 or more mm gap.<br>
<br>
I am thinking of using a nut and bolt with a few washers to
hopefully make the bolts holes flat again. Are there any
other good simpler ways to do this. I don't want to hammer
them as I think I will do more damage.<br>
<br>
Sujit <br clear="all">
<div><br>
</div>
-- <br>
<div dir="ltr"
class="gmail-m_-5275220951000333500gmail_signature">
<div dir="ltr">
<div>Sujit Roy<br>
Cupertino, California</div>
<div><br>
<a href="https://triumphstagblog.wordpress.com/"
target="_blank" moz-do-not-send="true">https://triumphstagblog.wordpress.com/</a><br>
<br>
</div>
</div>
</div>
</div>
** <a href="mailto:triumphs@autox.team.net" target="_blank"
moz-do-not-send="true">triumphs@autox.team.net</a> **<br>
<br>
Donate: <a href="http://www.team.net/donate.html"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://www.team.net/donate.html</a><br>
Archive: <a href="http://www.team.net/pipermail/triumphs"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://www.team.net/pipermail/triumphs</a>
<a href="http://www.team.net/archive" rel="noreferrer"
target="_blank" moz-do-not-send="true">http://www.team.net/archive</a><br>
<br>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com</a><br>
</blockquote>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">** <a class="moz-txt-link-abbreviated" href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **
Donate: <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/triumphs">http://www.team.net/pipermail/triumphs</a> <a class="moz-txt-link-freetext" href="http://www.team.net/archive">http://www.team.net/archive</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net">http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net</a>
</pre>
</blockquote>
<pre class="moz-signature" cols="72">--
Paul Tegler
<a class="moz-txt-link-abbreviated" href="mailto:ptegler@verizon.net">ptegler@verizon.net</a> <a class="moz-txt-link-abbreviated" href="http://www.teglerizer.com">www.teglerizer.com</a></pre>
</body>
</html>