<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body>Thank you all so much for some great suggestions. <div><br></div><div>First i plan to soak the cylinders with pb blaster and magic mystery oil for a week or two, gently try to turn the engine over, soak some more, gently try again, etc. </div><div><br></div><div>After that, change all the fluids and check that the valves are all moving. Maybe a compression test. <br><div dir="auto"><br></div><div dir="auto">Then I plan to get it running. If i am not mistaken, from battery to ignition coil to ground, plus new plugs and wires, use a "remote" starter, probably a little starter fluid, gas can to electric pump to carbs, and i might have something!</div><div dir="auto"><br></div><div dir="auto">If not, it's carb rebuild time</div><div dir="auto"><br></div><div dir="auto">Then my son and i have to have some serious discussions on where we go from there. I think we are aiming for driver, but staying more or less correct. </div><div dir="auto"><br></div><div dir="auto">I like the idea of pulling the engine now and doing the cleanup/paint before doing the hydraulics and the wiring. </div><div dir="auto"><br></div><div dir="auto">More info, and it will be updated as we make progress at www.ranteer.com/davescars/tr3a</div><div dir="auto"><br></div></div>