<html><head><meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></head><body>Yes, i think you are correct. I don't think it is a blinker at all. Headlight switch wires and colors match the diagram!<div><br></div><div style="font-size:100%;color:#000000"><!-- originalMessage --><div>-------- Original message --------</div><div>From: Randall <TR3driver@ca.rr.com> </div><div>Date: 11/24/18 1:17 PM (GMT-06:00) </div><div>To: 'dave' <dave@ranteer.com>, triumphs@autox.team.net </div><div>Subject: RE: [TR] TR6 blinker switch </div><div><br></div></div>I suspect that what you have there is not a turn signal switch at all; but<br>rather the headlight switch for 69-72 TR6 (and perhaps others).<br><br>There should be 3 positions vertically (as installed). One position is no<br>connection (off), middle position connects NU to RG (parking lights), last<br>position connects NU to RG to U (headlights on).<br><br>You should also be able to move the lever towards the driver (again as<br>installed) against a spring, which will connect N to UW (flash to pass).<br><br>The colors don't quite match the colors on Dan's diagram, but they do match<br>exactly the colors on the diagram in the workshop manual. (IMO this is a<br>mistake in Dan's diagram; or perhaps a sign that not all switches had the<br>same color wires.)<br><br>-- Randall <br>56 TR3 TS13571L once and future daily driver<br>71 Stag LE1473 - awaiting engine rebuild<br>71-2-3 Stag - awaiting gearbox rebuild <br><br>> -----Original Message-----<br>> From: Triumphs [mailto:triumphs-bounces@autox.team.net] On <br>> Behalf Of dave<br>> Sent: Saturday, November 24, 2018 9:44 AM<br>> To: triumphs@autox.team.net<br>> Subject: [TR] TR6 blinker switch<br>> <br>> Here is a picture of the blinker switch wires on the wiring <br>> diagram. If i connect blue to red/green, i get connectivity <br>> with the switch in one position. In the other position i <br>> get no connectivity between the blue and any other wire. Is <br>> the switch bad? Can anyone tell me what the wires are for <br>> since i don't see the correlation between the diagram and the switch?<br>> <br><br><br></body></html>