<div dir="ltr"><br><br><div class="gmail_quote"><div dir="ltr">On Sat, Oct 6, 2018 at 8:13 PM Randall <<a href="mailto:tr3driver@ca.rr.com">tr3driver@ca.rr.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><br>Or buy some spring wire and make one from scratch. I've done it in the lathe, but you could probably manage with a slow turning drill and a nail or similar for a mandrel. </div></blockquote><div><br></div><div>I have a local hardware store (remember them?) that has a couple of drawers full of replacement springs.  Looks like the spring in question is used to hold the brushes against the commutator enough so they don't bounce, but not so much that they grind the brushes away.  A light touch... Finding an appropriate spring (or something that will work) ought not to be much of a problem.  Making the "ears" is a trivial exercise left to the reader.  ;)</div><div><br></div><div>Jeff Scarbrough</div><div>Corrosion Acres, Ga.</div></div></div>