<div><div dir="auto">Thanks  for such a great answer. It did accidentally  line up and go in. The triumph gods We’re looking down on me favorably, as someone said.</div></div><div><br><div class="gmail_quote"><div dir="ltr">On Wed, Oct 3, 2018 at 11:17 PM Randall <<a href="mailto:tr3driver@ca.rr.com">tr3driver@ca.rr.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I've not tried it, but my guess is that a magnet would make the task much<br>
harder, rather than easier.  The tappet has to be positioned "just so" to<br>
drop into it's bore (as noted, you cannot force it, it will fall of it's own<br>
weight once it gets lined up).  But unless you are very lucky, a magnet is<br>
going to want to grab it and tip it at an angle.  The hole in the center of<br>
the tappet does not have a flat bottom.<br>
<br>
I did it using just the pushrod as a tool, to scoot the tappet around until<br>
it lined up and fell in.  But of course you can't see what is going on, so<br>
it's all by touch, intuition and guesswork.  I doubt seriously I could do it<br>
again today.<br>
<br>
Sorry, Paul, I didn't understand your question about brass or bronze.  They<br>
certainly have their uses (non magnetic, non marring, rust resistant, softer<br>
than steel, etc) but I see no particular advantage here.<br>
<br>
A bent coat hanger seems less than ideal though, because it is so springy.<br>
Hard to move the tappet by just a thousandth or two, since first the coat<br>
hanger will bend and then, when enough force is supplied, it will fling the<br>
tappet to the other side of the cavity.<br>
<br>
-- Randall  <br>
<br>
</blockquote></div></div>