<font color='black' size='3' face='Arial, Helvetica, sans-serif'><font size="3">I was told that all fluids ARE compressible but most fluids compress so little it is of no consequence.  I guess defining a fluid as compressible is a judgement call based on the context.<br>
<br>
Like Randall, I have had good results using DOT5 fluid with the SS braided hoses.  Rant that setup on my TR6 for almost 20 years.  It is currently disassembled due to frame issues but it will be going back together with the same set-up when I get the frame back.<br>
</font>
<div> <br>
</div>

<div> <br>
</div>

<div style="clear:both"><font size="4">Dave Massey</font><br>
<br>
</div>

<div> <br>
</div>

<div> <br>
</div>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Anthony Rhodes <spamiam@comcast.net><br>
To: triumphs <triumphs@autox.team.net><br>
Cc: dave1massey <dave1massey@cs.com><br>
Sent: Mon, Nov 20, 2017 3:31 pm<br>
Subject: Re: [TR] TR6 Brakes Update<br>
<br>
I recently used some silicone brake fluid that had been sitting untouched for 2 years.  It still foamed up when I vacuumed it. <br>
<br>
I think the residual micro bubbles in solution are why people feel that silicone brake fluid gives a softer brake pedal than DOT3/4. <br>
<br>
As I recall aren't ALL fluids considered "incompressible".  If so, then if silicone gives softer brakes then it is something other than the silicone fluid that is causing it.....   Micro bubbles???<br>
<br>
-Tony<br>
<br>
Sent from my 1837 Babbage Analytical Engine<br>
<br>
> On Nov 20, 2017, at 2:00 PM, triumphs-<a removedlink__6e91375a-5762-40ee-85e2-c16df05624b1__href="mailto:request@autox.team.net">request@autox.team.net</a> wrote:<br>
> <br>
> Message: 1<br>
> Date: Sun, 19 Nov 2017 14:09:43 -0500<br>
> From: Dave <<a removedlink__6e91375a-5762-40ee-85e2-c16df05624b1__href="mailto:dave1massey@cs.com">dave1massey@cs.com</a>><br>
> To: <a removedlink__6e91375a-5762-40ee-85e2-c16df05624b1__href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a><br>
> Subject: Re: [TR] TR6 Brakes Update<br>
> Message-ID: <15fd5afb50f-c12-5e164@webjas-vaa071.srv.aolmail.net><br>
> Content-Type: text/plain; charset="utf-8"<br>
> <br>
> I was once told by someone with experience with silicone fluids that it will readily take up air bubbles but it will release it quite readily, too.  In fact that is the technique used in very high vacuum pumps.  Therefore the technique I use is to fill the master cylinder and wait a while (couple hours if possible) before I bleed.<br>
<br>
</div>
</font>