<div dir="ltr"><div><div><div><div>Thank you Randall, Bob and Bill.<br><br></div>With help from my English "advisors" at the  Stag Owners Club, I worked from inside t he car, rremoving the console materials that enclose the gear shifter, and then lifted out the shifter. The gear selector rods were jammed in mid-position, and it was a simple matter to realign them in neutral. I then replaced the shifter and its retainer, and shifted easily throught he gears. Started her up and everything back to normal.<br><br></div>So all is well for the moment. Next question is how to prevent it happening again. The suspicion is that everything down there is worn, but I',m not about to remove the whole d--n engine and tranny again to replace the shifter rods. Maybe a better gear stick would help. <br><br></div>The beats goes on.  Still awaiting that multi-hour comfy ride with my honey.<br><br></div>John<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Sep 14, 2016 at 7:55 PM, Randall <span dir="ltr"><<a href="mailto:TR3driver@ca.rr.com" target="_blank">TR3driver@ca.rr.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span class="">> The Stag is in the paint shop for the finishing touches, and while moving<br>
> the car about the shifter jammed up somewhere between reverse and neutral.<br>
> The clutch seems operative because when depressed the car will roll. Any<br>
> ideas as to how to pop the tranny into neutral? The old-timee shop owner<br>
> suggests starting the car then pushing it hard and releasing the clutch.<br>
> Or, perhaps the clutch needs just a little more throw, with adjustment at<br>
> the lever?<br>
<br>
</span>I must be missing something.  If the clutch works, why do you think it is a<br>
clutch problem?<br>
<br>
I would check the nut on the side, someone may have loosened it thinking it<br>
was the fill plug or something (it actually retains part of the reverse<br>
shift mechanism).  If so, there is a slim chance that tightening it back up<br>
will pull the lever into place and let you shift out of reverse.<br>
<br>
Otherwise, I think it best to disconnect the driveshaft until you can rescue<br>
it from the paint shop on a flatbed.  The "pop the clutch" idea sounds like<br>
a great way to make a bad situation worse!<br>
<br>
My sympathies, as IMO pulling the transmission on a Stag is a miserable job.<br>
That's partly why mine has been on jackstands since 2008!<br>
<span class="HOEnZb"><font color="#888888"><br>
Randall<br>
<br>
</font></span></blockquote></div><br></div>