<html>
<head>
<meta content="text/html; charset=windows-1252"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<p>What I am reading is that your car has a throttle switch
installed. "when I'm accelerating and flip the switch for OD, it
doesn't go into OD until I let up."</p>
<p>The switch on the dash activates only the solenoid which allows
oil pressure to flow into the operating pistons and push the
clutch assembly into the "OD" mode. Period. Did I say Period.</p>
<p>So assuming you are going at least 40MPH, even 200PSI will engage
(regardless of what the books say) All the A units are virtually
identical. Now, having said that, Triumph did specify differences
in the accumulator/lack of accumulator and accumulator spring.</p>
<p>So, you told me before that there is no throttle switch (kick
down relay) installed, therefore it sounds to me that there is too
much pressure at increased rpm and it is blowing the oil pressure
past the currently installed o-rings and or piston rings. After
you decrease engine (ergo pump speed) it re-engages. I would
certainly replace the rings and rubber O-rings. There is no modern
computer involved. This is a purely 'mechanical' issue. Your shop
should have found the issue by now???</p>
<p>DaveP<br>
</p>
<br>
<div class="moz-cite-prefix">On 6/10/2016 9:50 AM, Rye Livingston
wrote:<br>
</div>
<blockquote cite="mid:06d9f0a1-bc70-4a33-9f47-9150424d7930@me.com"
type="cite">
<div>Transmission update - for those reading about this for the
first time, this is a 1960 TR3 with a TR4 OD transmission.
Yesterday they said it's basically a TR250 transmission. The
whole transmission and OD was rebuilt by a British car
specialist of 40+ years. His employee has also been working on
British cars for years, and is a transmission specialist.
They've rebuilt literally 100s of transmissions and ODs. They
had 4 OD cores on their bench as they were showing me different
parts of the system.</div>
<div><br data-mce-bogus="1">
</div>
<div>Symptom - when I'm accelerating and flip the switch for OD,
it doesn't go into OD until I let up. When in 2-3 or 4th gear,
OD engaged, and punch it, it will downshift like an automatic
transmission while I accelerate, then shift back into OD when I
let up.</div>
<div><br data-mce-bogus="1">
</div>
<div>I'm not technical enough to know how to describe all what
they told me, but I'll try. First off, I forwarded the comments
when I posted this issue a couple of weeks ago, and keep in mind
it's not the easy/obvious things. They've checked all the
electrical, solenoids, ground, oil type, etc. When in OD it's
not slipping. They've tested the PSI with a gauge attached
while driving down the expressway, and jacked up with the wheels
off the ground. </div>
<div><br data-mce-bogus="1">
</div>
<div>The issue is that it's not getting high enough PSI. It's
over 400 PSI, but it needs to be 490 to over 500, I think they
said 520. They've taken the transmission back out, taken the OD
all apart, and there's nothing obvious. They've changed the
piston in the pump. Originally it had a pump that would shift
softer because I've got a torquey engine and the other pump,
which they called a competition pump, would be hard on the
differential, but they've got that one in the car now. They
showed me a seal that goes around that piston and said the new
seals are rubber and they got one like the original style that
has some sort of metal reinforcement in it to hopefully make a
better seal. Not very clear I know, but hopefully that makes
sense. They've checked the seats where a small ball bearing
must make a perfect seal, they all look perfect. They said
everything looks absolutely pristine. No scoring down
passageways that might not allow maximum PSI, etc. They also
showed me the lining on a Sun gear they had on the beach, and
said mine looked good and the rivets looked original. They put
it all back together, went for a test drive, and that didn't fix
it.<br>
</div>
<div><br data-mce-bogus="1">
</div>
<div>They've spent literally 20+ hours on this transmission, plus
several more hours doing internet research on the problem. As
they described everything and what they've checked, which seems
like everything, I said I'd send out this email to the list.
Not that they haven't tried everything, but I'm hoping there
may be one little nugget of info they haven't tried, or a test
they can run, that will lead to the solution.</div>
<div><br>
</div>
<div>Thanks,</div>
<div><br data-mce-bogus="1">
</div>
<div>Rye Livingston<br>
</div>
<div>Triumph Travelers Sports Car Club</div>
<div>Activities Chairman</div>
<div>1960 TR3A</div>
<div>PH: 530-FIND-RYE</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">
** <a class="moz-txt-link-abbreviated" href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **
Donate: <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/archive">http://www.team.net/archive</a>
Forums: <a class="moz-txt-link-freetext" href="http://www.team.net/forums">http://www.team.net/forums</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com">http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com</a>
</pre>
</blockquote>
<br>
<div class="moz-signature">-- <br>
Dave Porter
Porter Custom Bicycles
2909 Arno St. NE
Albuquerque, NM 87107
505-352-1378
Go HERE: my world <a class="moz-txt-link-abbreviated" href="http://www.porterbikes.com/">www.porterbikes.com/</a>
</div>
</body>
</html>