<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Ditto Dave. </div><div id="AppleMailSignature">Just had that same problem with a recent non-TR acquisition. PO had installed the higher pressure pump and the car instantly flooded as soon as it was turned off. Much fiddling and head scratching before I replaced the fuel pump with a 2-3psi Facet and problem was solved. <br><br>Sent from my VIC-64</div><div><br>On Mar 12, 2016, at 8:31 AM, Creig Houghtaling <<a href="mailto:creig555@live.com">creig555@live.com</a>> wrote:<br><br></div><div>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<div id="divtagdefaultwrapper" style="font-size:12pt;color:#000000;background-color:#FFFFFF;font-family:Calibri,Arial,Helvetica,sans-serif;">
<p>Mechanical pump.<br>
</p>
<br>
<br>
<div style="color: rgb(0, 0, 0);">
<hr tabindex="-1" style="width: 98%; display: inline-block;">
<div id="divRplyFwdMsg" dir="ltr"><font color="#000000" face="Calibri, sans-serif" style="font-size: 11pt;"><b>From:</b> Dave <<a href="mailto:dave1massey@cs.com">dave1massey@cs.com</a>><br>
<b>Sent:</b> Wednesday, March 9, 2016 6:52 AM<br>
<b>To:</b> <a href="mailto:creig555@live.com">creig555@live.com</a>; <a href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a><br>
<b>Subject:</b> Re: [TR] TR6 Stromberg question</font>
<div> </div>
</div>
<div><font color="black" face="Arial, Helvetica, sans-serif" size="4"><font size="4">Is he running an electric fuel pump? If so is it a 2 - 3 PSI unit or the higher, more common 5 - 7 PSI pump? the higher pressure may be overcoming the float valves.</font>
<div><br>
</div>
<div><br>
</div>
<div style="clear: both;"><font size="4">Dave Massey</font><br>
<br>
</div>
<div><br>
</div>
<div><br>
</div>
<div style="color: black; font-family: arial,helvetica; font-size: 10pt;">-----Original Message-----<br>
From: Creig Houghtaling <<a href="mailto:creig555@live.com">creig555@live.com</a>><br>
To: Triumph List <<a href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a>><br>
Sent: Tue, Mar 8, 2016 5:24 pm<br>
Subject: [TR] TR6 Stromberg question<br>
<br>
<div id="AOLMsgPart_1.2_c425e000-65cf-4115-8c1a-67dac2ee440e">
<div class="aolReplacedBody">My friend's TR6 was running poorly. After the car had been running, and was turned off, I noticed drips of gasoline dropping from the port below the forward carb just in front of the intake manifold. I concluded the Gross jet was
not stopping the flow of gas to the carb and gas was getting pushed into the engine. So I replaced both float valves with standard valves and also changed both floats. After putting everything back together, I ran the car for a few minutes and turned it off.
It was dripping gas out the same port. Looked in the throat from the air filter side and saw a small puddle of gas in the lower area right in front of the venturi. As far as I know, that means the gas isn't shutting off. Perhaps I didn't adjust the float correctly.
Or there is something at the fuel inlet orifice allowing gas to bypass the valve. Is there anything I am missing here? Could the enrichment valve (choke) be the culprit? I haven't touched that yet. I adjusted the new float to fully close the valve when the
mold line of the float was parallel with the horizontal edge of the carb where the fuel reservoir attaches.<br>
<br>
Am I missing anything else here? <br>
<br>
Thanks <br>
Creig Houghtaling<br>
</div>
</div>
<br>
** <a>triumphs@autox.team.net</a> **<br>
<br>
Donate: <a target="_blank">http://www.team.net/donate.html</a><br>
Archive: <a target="_blank">http://www.team.net/archive</a><br>
Forums: <a target="_blank">http://www.team.net/forums</a><br>
Unsubscribe/Manage: <a target="_blank">http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com</a><br>
</div>
</font></div>
</div>
</div>
</div><div><span></span><br><span>** <a href="mailto:triumphs@autox.team.net">triumphs@autox.team.net</a> **</span><br><span></span><br><span>Donate: <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a></span><br><span>Archive: <a href="http://www.team.net/archive">http://www.team.net/archive</a></span><br><span>Forums: <a href="http://www.team.net/forums">http://www.team.net/forums</a></span><br><span>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/triumphs/wbeech@flash.net">http://autox.team.net/mailman/options/triumphs/wbeech@flash.net</a></span><br></div></body></html>