<font color='black' size='4' face='Arial, Helvetica, sans-serif'>
<font size="4">I think it is 8mm dia and 1.25 mm pitch on the threads.</font>


<div> <br>

</div>



<div style="clear:both"><font size="4">Dave Massey</font><br>

<br>

</div>



<div> <br>

</div>



<div> <br>

</div>



<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>

From: Bob Labuz <yellowtr@adelphia.net><br>

To: Triumphs List <triumphs@autox.team.net><br>

Sent: Thu, Jul 30, 2015 7:54 pm<br>

Subject: Re: [TR] thread size of uprated Moss water pump shaft.<br>

<br>




<div id="AOLMsgPart_1_8d62a36e-0628-44ed-8385-5a496dcaa208" style="margin: 0px;font-family: Tahoma, Verdana, Arial, Sans-Serif;font-size: 12px;color: #000;background-color: #fff;">

<pre style="font-size: 9pt;"><tt>Hello,

Just received an email from Jeff. The thread size was confirmed by
Moss 
tech support as 8 1.25. Does that mean 8MM and 1.25 TPMM?

Bob

On
07/30/2015 04:01 PM, Bob Labuz wrote:
> Hello,
>
> Received a pump from Jeff
at LBcar today but it did not have a nyloc 
> nut supplied. Looked like 5/16 so
I went to the hw bin and pulled out 
> a 5/16 18 and it would not fit. Tried a
5/16 24 no go.
>
> I measured the thread with a gauge and it seems to be 20
TPI.
>
> I emailed Jeff to get me the correct thread size and he replied 5/16

> UNF which is 24 TPI. This shaft is not 24 TPI. It may be 5/16 but not 
> 18
or 24 tpi.
>
> I went down to Lowes to check their metric HW and it seems to
be a 
> M8-1.25.
>
> Can anyone help here? I dont want to install the pump
without the 
> correct nyloc nut for the pulley.
>
> The moss part # for the
pump is
>
> -835-073 x 1 Total
>
> Thanks,
>
> Bob
>

<a removedlink__ef77a10c-77b6-40ea-8273-6d7e6603cc72__href="http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com" target="_blank"></a>
</tt></pre>
</div>

 <!-- end of AOLMsgPart_1_8d62a36e-0628-44ed-8385-5a496dcaa208 -->
</div>

</font>