<div>the one in the long arch needs to be tightened.</div>
<div> </div>
<div>I usually start from scratch and back both adjusters out. Then I take each one 3 clicks. then I adjust one to tight counting the clicks. Count back half and tighten the other accordingly.</div>
<div> </div>
<div>I'll do that on both sides - test drive and if not balanced - I'll pull that wheel and tighten by one or two clicks - depending on how hard it pulled and how many clicks are left.</div>
<div> </div>
<div>I'm afraid you could have another issue. When is the last time you replaced the flex hoses? I had a similar issue like this years ago. - one side came on slower than the other and then stayed on longer - made for some crazy braking....</div>
<div> </div>
<div>Good luck.<br></div>