[TR] reaf leaf spring - solved

[DAVID MASSEY]

Yup.  That works.  I use anti-seize on assembly to make it easier next time around.
Dave 


 

    On Thursday, March 26, 2026 at 07:41:41 PM CDT, dave northrup <dave at ranteer.com> wrote:   

  
Cut a slot lengthwise along the cylinder.  Pounded on it the slot with a chisel and then finally it started to rotate.
 
  
 
Then cut a slot near the frame and using the chisel pounded the cylinder out.
 ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20260327/f97d0a6e/attachment.htm>