[TR] TR4 gear selector

[DAVID MASSEY]

I didn't see a response to this.  The lever itself is easily removed although you will have to remove the boot first.  And probably the yoke.  The rest is part of the transmission cover.  You can pull that, too, but you will need to remove the transmission cover (that big, cardboard (or, in my case, plastic) part).  And make that a maybe.  Is there enough clearance to pull the shifter forks clear of the synchros with the heater in place?
Dave 


 

    On Monday, October 13, 2025 at 01:06:26 PM CDT, Allen Hess <allen.k.hess at gmail.com> wrote:   

 I’m wondering if there is enough clearance to remove the gear selector from the transmission with transmission in the car. 4A and 6 are likely the same. 
Allen 

Very belated update on rear dampers. Put in 10W motorcycle fork oil and I’m satisfied with the result. I was afraid it might be too soft but not so. 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251016/7828a5ab/attachment.htm>