[TR] TR3A door reinforcing

[DAVE HOGYE]

Hi Dave,
I have used 1/2" electrical conduit for this purpose.  Easy to manipulate and inexpensive.  If you have a welder, you can just tack weld to the door openings and perhaps a side to side diagonal support as well.  If a welder is not available, the conduit ends can be pinched/flattened and a hole drilled for a bolt/screw to hold it in place.  You can connect to the upper hinge and convertible top bows attachment locations.  
 
Dave H.

> On 10/14/2025 8:55 AM PDT dave northrup <dave at ranteer.com> wrote:
>  
>  
> 
> Does anyone have a set of door reinforcers I can buy/borrow when I take the body off the frame (with the doors already removed)?
> 
>  
> 
> I am getting ready to remove the body and need to reinforce the doorways so the body doesn’t fold in.
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251014/fa555ae7/attachment.htm>