From billbrewer59 at yahoo.com  Mon Dec  1 23:40:10 2025
From: billbrewer59 at yahoo.com (Bill Brewer)
Date: Tue, 2 Dec 2025 07:40:10 +0100
Subject: [TR] tr3 heater
In-Reply-To: <12fd4f4b9bdd4d839c9258846f091db7@ranteer.com>
References: <12fd4f4b9bdd4d839c9258846f091db7@ranteer.com>
Message-ID: <289B81B0-69BF-4390-8E1C-DB86F8EBC8D0@yahoo.com>

     I did a Maradyne heater 20 years ago and did a write up for the list. It pumped out heat for sure. I reversed the sides that the coolant tube entered and exited and cut a notch in the square case for the choke cable to go through. The defrosters never seemed to work right no matter what I did. I would go with the Macys Garage route next time. 
     Bill Brewer
     Morro Bay, CA
     1960 TR3A
     1953 Morgan Plus4 Flad Rad



Sent from my iPhone

> On Nov 30, 2025, at 10:33?PM, dave northrup <dave at ranteer.com> wrote:
> 
> ?
> Not sure if the old heater core is still good.
>  
> ISTR that someone sells a good alternative.  Anyone have that info?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251202/59da90da/attachment.htm>

From dave at ranteer.com  Sat Dec  6 14:02:22 2025
From: dave at ranteer.com (dave northrup)
Date: Sat, 6 Dec 2025 21:02:22 +0000
Subject: [TR] new commission plate and stamping
Message-ID: <3c6d57caa83a451e80cd954cdedd3de8@ranteer.com>

Who is the go to person for a 58 TR3a?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251206/7c8605db/attachment.htm>