[TR] Adapting+J+Type+Overdrives+to+TR250+&+early+TR6+Frames.pdf

[David P]

FWIW.. I used a few pieces of angle iron and made/MIG'd my own chassis 
attachments. Yes, speedo cable requires an angle drive.. DaveP

On 10/18/2024 12:14 PM, Greg Lemon wrote:
> Is this helpful? I used these instructions to build the mount for the 
> J-type on my TR250, the speedo cable is a tight fit using the angle drive
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com

-- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 87107 ph 505-352-1378  My World go here: WWW.PORTERBIKES.COM/