[TR] TR transmission

[Greg Lemon]

Dave, some wire from the hood release down to a transmission bolt hole
towards the top right, and another from the steering column shaft down to a
hole on the upper left, some suitable buffer to keep the wire from
scratching the forward edge of the battery box.  I assume you don't want to
pull the transmission or it would already be done

Greg Lemon
TR250

On Sat, Jun 1, 2024, 8:10 PM dave northrup <dave at ranteer.com> wrote:

> 1972 TR6
>
>
>
> We have pulled the engine; the tran is still sitting in the car.
>
>
>
> The car is on a ez lift and right now not too far off the ground.
>
>
>
> The trans is on an adjustable transmission jack.
>
>
>
> I’d like to get under the car and do some maintenance, but I’m trying to
> figure out the best way to support it as it goes up.  there are a couple of
> bolts that I could attach it to.  I don’t want to attach it to the
> accelerator bar that goes across.
>
>
>
> Anyone have some suggestions?
>
>
>
> Thanks!
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/grglmn@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20240601/f1f9e1cc/attachment.htm>