[TR] helicoil in trans housing

[DAVID MASSEY]

That's a through-hole, is it not?  The bore may be too big for for a heli-coil.  But it might work.  Let us know.

I was thinking along other lines and making a piece of curved steel with a couple of nuts welded on where the starter bolts attach.  

I've successfully replaced a starter without pulling the transmission cover but it meant squeezing my arm up past the cover and the bell housing.  Unnecessarily difficult at any rate.

Dave 


 

    On Wednesday, July 3, 2024 at 10:51:36 AM CDT, dave northrup <dave at ranteer.com> wrote:   

  
I’ve got the engine and transmission out in the TR6, so I’m thinking of putting a helicoil in the trans housing to bolt the starter into. 
 
  
 
Anything I need to know before I do that?  any tips?
 ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20240703/ffa02e7d/attachment.htm>