[TR] TR250 windshield trim question.

[Chad]

 Just tap it in with a rubber mallet.  I've done a bunch over the years that way.
Chad in Tulsa
    On Friday, September 1, 2023 at 02:36:45 PM CDT, Tom Fansher <tfansher at comcast.net> wrote:  
 
 

Ok helping a buddy. The windshield is installed and now for the chromed plastic finisher. It doesn’t want to “slip” into the groove in the black rubber glazing. The groove is REALLY tight. Any suggestions from TR4, 250 or Tr6 guys?  Stuff cord into the groove and apply heat?  
TIA
Tom Fansher
61 TR3
62 TR4

Sent from my iPhone
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230902/d5170514/attachment.htm>