[TR] TR3A Fuel pump

[dave northrup]

Yes, the blanking plate from a small block Chevy works just fine


-------- Original message --------
From: Chris Simo <ccsimonsen at gmail.com>
Date: 10/26/23 2:37 PM (GMT-06:00)
To: triumphs at autox.team.net
Subject: Re: [TR] TR3A Fuel pump

I ran a facet at least 10 years ago - relying on Randalls choice of part numbers.

I was in a hurry and found a chevy fuel blanking plate that I hear fit the Triumph just fine - and it does.  With blanking plate and pump in hand I saw the mounting holes were almost identical.

I took some old MG rubber exahust mounts and sandwiched them between the blanking plate and my new pump and presented it to the engine.  It's been relatively quiet in operation and have had no issues with the mounting location.  By the way it squirted gas, it must be close to the level of the bottom of the tank.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20231026/9cde1493/attachment.htm>