[TR] TR6 (ZS) carb needle valve - gasket

[Randy and Valerie DeRuiter]

Lee-  just the aluminum washer is all I’ve ever done.  You still need to check float height level to make sure your fuel level height is good.

Randy

Sent from my iPhone

> On Oct 6, 2023, at 8:15 PM, lee at automate-it.com wrote:
> 
> 
> P.S. Since I wrote this, I've gone ahead and installed with the aluminum gaskets - I'm pretty sure this is preferred for these carbs. But I'm interested in any thoughts about this!!
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/deruiterville@hotmail.com