[TR] Brookland Racing Screens

[auprichard uprichard.net]

There is a guy in the UK called Peter Wigglesworth who sells supports for the screens which utilize the original holes for the Brooklands.

Andrew Uprichard
Jackson, Michigan

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of dave northrup
Sent: Sunday, November 26, 2023 4:46 PM
To: keithstewart at bell.net; 'bill beecher' <notakitcar at yahoo.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Brookland Racing Screens

Thats ok.  I suspect there are numerous manufacturers.   This gives me a great baseline.   Once i actually buy the screens i can use  these measurements to help me get them where i want them.


-------- Original message --------
From: keithstewart at bell.net<mailto:keithstewart at bell.net>
Date: 11/26/23 3:15 PM (GMT-06:00)
To: 'bill beecher' <notakitcar at yahoo.com<mailto:notakitcar at yahoo.com>>, dave northrup <dave at ranteer.com<mailto:dave at ranteer.com>>
Cc: triumphs at autox.team.net<mailto:triumphs at autox.team.net>
Subject: RE: [TR] Brookland Racing Screens

Those holes are spaced for the Triumph accessory aero screens . I believe the Brooklands type require different spacing.
Keith

Keith Stewart
keithstewart at bell.net<mailto:keithstewart at bell.net>
https://worldoftriumph.godaddysites.com/



From: bill beecher <notakitcar at yahoo.com<mailto:notakitcar at yahoo.com>>
Sent: Saturday, November 25, 2023 4:43 PM
To: dave northrup <dave at ranteer.com<mailto:dave at ranteer.com>>
Cc: triumphs at autox.team.net<mailto:triumphs at autox.team.net>
Subject: Re: [TR] Brookland Racing Screens

Dave,
Measuring the factory attaching bolts on my 1958, they are 13.75” oc apart; 3.25” setback from the finished dash; center on the defrost vent opening.

[cid:image001.jpg at 01DA2106.14F371B0]
“Shoot low sheriff, she’s riding a shetland” …B.Wills

On Nov 25, 2023, at 11:02 AM, dave northrup <dave at ranteer.com<mailto:dave at ranteer.com>> wrote:

Am seriously looking at putting Brookland Racing Screens on my 59 TR3a.  its still in primer so now is the time.

I haven’t purchased them yet so I’m not sure what directions come with them.

I’m looking for recommendations on exactly where to install them, hopefully measurements etc. from someone who’s done it.

Thanks!

Dave N
Dallas TX
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20231127/0d0a8915/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 109478 bytes
Desc: image001.jpg
URL: <http://autox.team.net/pipermail/triumphs/attachments/20231127/0d0a8915/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Brooklands 2.JPG
Type: image/jpeg
Size: 700091 bytes
Desc: Brooklands 2.JPG
URL: <http://autox.team.net/pipermail/triumphs/attachments/20231127/0d0a8915/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Brooklands 1.JPG
Type: image/jpeg
Size: 685035 bytes
Desc: Brooklands 1.JPG
URL: <http://autox.team.net/pipermail/triumphs/attachments/20231127/0d0a8915/attachment-0001.jpe>