[TR] TR6 throttle linkage with vacuum switch/valve?

[keithstewart at bell.net]

Obviously, you should organize in a way that will work for you, but I thought I might share an alternative that seems to me to be far superior to using the Moss parts numbers. For decades, I have been entering my various parts into spreadsheets with tabs for the storage locations (Bin1, Loose, Shelf X, etc.). It seems to me that the original parts numbers used by Triumph is the better choice since these are the numbers used by the Spare Parts Catalogue, Moss Europe, Rimmer Brothers, Revington TR, TRF, etc. Good luck with your project. I can attest to the fact that it will make locating needed parts much easier – provided you keep it up to date.

 

 

Keith Stewart

keithstewart at bell.net

World of Triumph https://worldoftriumph.godaddysites.com/

 

 

From: Chris Simo <ccsimonsen at gmail.com> 
Sent: Tuesday, May 9, 2023 12:03 PM
To: list Triumph <triumphs at autox.team.net>
Subject: [TR] TR6 throttle linkage with vacuum switch/valve?

 

I'm finally trying to organize my parts.

In general I'm following the moss motors categories for new parts.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230509/131045dd/attachment.htm>