[TR] Wizard Cooling

[keithstewart at bell.net]

I have three of them. The first was for a TR4 (now in my TR3) and it did not
have a bung hole for a thermostatic sensor. Also, the mounting brackets had
it mounted too far to the rear. It was a simple matter to drill two
additional holes in the rear of the flange to place the rad in the correct
position, further forward. Years later, I bought a second one for my newer
TR4, it had the bung for the sensor and holes forward and aft in the
flanges. I bought both of these from TRF during their sales. The third I
purchased for my TR4A with the electric fan installed. This one I purchased
directly from Wizard. Because the fan is mounted to the rear of the
radiator, the mechanical fan will have to be removed. I purchased Rick
Patton's Fan Eliminator Kit (Patton Engineering) and it was an easy install.
The rads themselves all work fine. If wanted, I have photos of the various
installs. Just email a request.

 

Keith

 

Keith Stewart

keithstewart at bell.net

World of Triumph keith-stewart.ca

 

 

 

From: dave northrup <dave at ranteer.com> 
Sent: March 29, 2023 4:07 PM
To: triumphs at autox.team.net
Subject: [TR] Wizard Cooling

 

Anyone have any experience with them?  I need a new radiator and am thinking
of buying one of theirs

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230330/54086565/attachment.htm>