[TR] TR6 Kidney Pad Speaker Bracket

[keithstewart at bell.net]

These pads are not for a TR6. Rimmers sells them for the 4/4A but they look
just like the ones that were in my wife's TR6 so that is what I planned to
use. Your suggestion in intriguing, I might just give it a try. Thanks.

 

Keith

 

From: auprichard uprichard.net <auprichard at uprichard.net> 
Sent: January 6, 2023 4:59 PM
To: keithstewart at bell.net; triumphs at autox.team.net
Subject: RE: [TR] TR6 Kidney Pad Speaker Bracket

 

Keith:  since the bracket is so simple, have you thought of an L-shaped
bracket on each pad with multiple holes or a slot in each, such that you
adjust it to where you want to be and then tighten a bolt through them ?

 

I am not that familiar with the TR6, but one that I did have had exactly
that for the pads.

 

Andrew Uprichard

Jackson, Michigan

 

From: Triumphs <triumphs-bounces at autox.team.net
<mailto:triumphs-bounces at autox.team.net> > On Behalf Of
keithstewart at bell.net <mailto:keithstewart at bell.net> 
Sent: Friday, January 6, 2023 2:51 PM
To: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 
Subject: [TR] TR6 Kidney Pad Speaker Bracket

 

I have a pair of TR4A leather kidney pads for radio speakers similar to what
is used on the TR6. Since the kidney pads were not on the TR4A, I do not
have the hardware. Does anyone have the dimensions of the bracket that joins
the two pads, crossing over the transmission cover? Or, better yet, does
anyone have a bracket with which they would be willing to part? It seems the
bracket is no longer available. Thanks in advance for any assistance you
might provide.

 

Keith

 

Keith Stewart

keithstewart at bell.net <mailto:keithstewart at bell.net> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230106/fd84d7a7/attachment.htm>