[TR] TR3a temp sensor

bill beecher notakitcar at yahoo.com
Thu Aug 10 07:57:19 MDT 2023


It just crud holding it in.  If you can turn it, I would first just keep working that to see if it loosens enough to come out before any other drastic solutions.   Maybe someone here can recommend a good decalcifing(sp) agent to help it along.  

“Shoot low sheriff, she’s riding a shetland” …B.Wills

On Aug 10, 2023, at 3:55 AM, dave northrup <dave at ranteer.com> wrote:


Here is where I am.  Do I cut up the housing or cut the sensor?  I can turn the sensor with pliars inside the housing but its clearly not coming out.  I put it in a bucket and poured very hot water in there but the gage didn’t move, so I’m figuring the gage doesn’t work.
<Temp Sensor.jpg>
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230810/07238d60/attachment.htm>


More information about the Triumphs mailing list