[TR] tr6 windshield top capping

[Chad]

 3M Strip Caulk is the best.
Chad

    On Friday, August 4, 2023 at 04:13:03 PM CDT, david hammond <dbh97530 at gmail.com> wrote:  
 
 There is a product called strip seal which can be used to seal the area between the top moulding and the windshield. It’s a putty strip that is about 3/16” round and about 16” long. It compresses easily and makes a good seal. Can be found at stores that sell automotive paint and body shop stuffDavid in Oregon 

Sent from my iPhone

On Aug 4, 2023, at 11:47 AM, dave northrup <dave at ranteer.com> wrote:





TR3a, one of the door studs is loose.  Very loose.  This would be where the tonneau lift a dots snap in for the tonneau along the outside.
 
  
 
Jb weld?  Wood putty?  Glue?  What’s a good solution here?
 ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dbh97530@gmail.com
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/triumph74tr6@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230804/f287f804/attachment.htm>