[TR] TR3 door stud

[bill beecher]

Dave,
From your description I presume this stud is screwed into wood.   A simple trick is to cut a splinter of wood and insert it into the hole then screw the stud in.  

If your wood is too far shot for any tricks you have to replace the door rail.   I have a pair to sell if you find you need them. 

Bill B
TS30800L



“Shoot low sheriff, she’s riding a shetland” …B.Wills

On Aug 4, 2023, at 1:47 PM, dave northrup <dave at ranteer.com> wrote:


TR3a, one of the door studs is loose.  Very loose.  This would be where the tonneau lift a dots snap in for the tonneau along the outside.
 
Jb weld?  Wood putty?  Glue?  What’s a good solution here?
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230804/493c3391/attachment.htm>