[TR] TR3 door stud

[dave northrup]

Let me try again.

One the outside of the doors are studs that the bottom of the side curtains snap into.  These studs go through the metal door and into the wood frame inside the door.  This one is completely stripped and just falls out.  since its wood that the stud screws into, I was thinking plastic wood or something like that.  or JB weld.


On Friday, August 4, 2023 at 01:49:29 PM CDT, dave northrup <dave at ranteer.com> wrote:



TR3a, one of the door studs is loose.  Very loose.  This would be where the tonneau lift a dots snap in for the tonneau along the outside.



Jb weld?  Wood putty?  Glue?  What’s a good solution here?
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230804/c0b26136/attachment.htm>