From dave at ranteer.com  Tue Nov  1 20:58:19 2022
From: dave at ranteer.com (dave northrup)
Date: Wed, 2 Nov 2022 02:58:19 +0000
Subject: [TR] 6 pack
Message-ID: <7e0d170a2bcc408ca0655e17aadea5e0@ranteer.com>

When is the 2023 TRials?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221102/3a8bccba/attachment.htm>

From larrygriffin.nc at gmail.com  Tue Nov  1 22:40:45 2022
From: larrygriffin.nc at gmail.com (Larry Griffin)
Date: Wed, 2 Nov 2022 00:40:45 -0400
Subject: [TR] 6 pack
In-Reply-To: <7e0d170a2bcc408ca0655e17aadea5e0@ranteer.com>
References: <7e0d170a2bcc408ca0655e17aadea5e0@ranteer.com>
Message-ID: <CAONC1_7kHcR8WCyVqWh8gTbPWNgocjcDaovu5WU=3-rsccM+MA@mail.gmail.com>

Dave,

On the 6-Pack Facebook page, I saw the dates listed as Sept 21- Sept 24,
2023. I haven't seen the name of the host hotel in Indiana, PA. You may
want to call The Roadster Factory for confirmation and further details.

Thanks,
Larry Griffin

On Tue, Nov 1, 2022 at 11:13 PM dave northrup <dave at ranteer.com> wrote:

> When is the 2023 TRials?
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/larrygriffin.nc at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221102/1edd18e5/attachment.htm>

From auprichard at uprichard.net  Thu Nov  3 12:32:38 2022
From: auprichard at uprichard.net (auprichard uprichard.net)
Date: Thu, 3 Nov 2022 18:32:38 +0000
Subject: [TR] LED headlight conversion
Message-ID: <DS7PR07MB7655C4EAB48063E12B6516E4CA389@DS7PR07MB7655.namprd07.prod.outlook.com>

Some time ago (2015, actually) Randall Young posted about converting his TR3 to LED headlights:


" I bought Hella H4 headlight conversions from BusDepot.com (who have a  great deal on them at the moment)

http://www.busdepot.com/0301600118

 Plus 30 watt LED H4 inserts from eBay, like these

http://tinyurl.com/nwxm7w2

 There are lots of choices available there and I can't say for sure that these are any better or worse than others.  But I liked the fan

 idea (LEDs are very sensitive to heat and keeping them cool will make them last longer) and felt they were worth trying."



I duly went out and bought exactly what Randall was suggesting, which included 60W 6000LM Cree LED Headlight 30W bulbs (H4 Hi-Lo).



They have lasted well, but one finally went out last night.



I can no longer find the Cree bulbs:  Does anyone have experience with alternative bulbs which would work (ideally with the fan function)?



Andrew Uprichard

Jackson, Michigan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221103/77d66d96/attachment.htm>

From davidt at opentext.com  Thu Nov  3 13:29:07 2022
From: davidt at opentext.com (David Templeton)
Date: Thu, 3 Nov 2022 19:29:07 +0000
Subject: [TR] LED headlight conversion
In-Reply-To: <DS7PR07MB7655C4EAB48063E12B6516E4CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
References: <DS7PR07MB7655C4EAB48063E12B6516E4CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
Message-ID: <YT2PR01MB6175E15B7672C139E4F1BBBCB6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>

I got H4 headlights for both the '3a and spitfire ( p700 Tripods in fact ).   I got H4 bulbs off amazon.   Been great.




From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of auprichard uprichard.net
Sent: Thursday, November 3, 2022 2:33 PM
To: TR3 Triumphs <triumphs at autox.team.net>; triumphs-owner at autox.team.net
Subject: [EXTERNAL] - [TR] LED headlight conversion

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. If you feel that the email is suspicious, please report it using PhishAlarm.

Some time ago (2015, actually) Randall Young posted about converting his TR3 to LED headlights:


" I bought Hella H4 headlight conversions from BusDepot.com (who have a  great deal on them at the moment)

http://www.busdepot.com/0301600118<https://urldefense.com/v3/__http:/www.busdepot.com/0301600118__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvIad4Dic$>



 Plus 30 watt LED H4 inserts from eBay, like these

http://tinyurl.com/nwxm7w2<https://urldefense.com/v3/__http:/tinyurl.com/nwxm7w2__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvw0m86F0$>



 There are lots of choices available there and I can't say for sure that these are any better or worse than others.  But I liked the fan

 idea (LEDs are very sensitive to heat and keeping them cool will make them last longer) and felt they were worth trying."



I duly went out and bought exactly what Randall was suggesting, which included 60W 6000LM Cree LED Headlight 30W bulbs (H4 Hi-Lo).



They have lasted well, but one finally went out last night.



I can no longer find the Cree bulbs:  Does anyone have experience with alternative bulbs which would work (ideally with the fan function)?



Andrew Uprichard

Jackson, Michigan



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221103/cd905a58/attachment.htm>

From auprichard at uprichard.net  Thu Nov  3 13:57:37 2022
From: auprichard at uprichard.net (auprichard uprichard.net)
Date: Thu, 3 Nov 2022 19:57:37 +0000
Subject: [TR] LED headlight conversion
In-Reply-To: <YT2PR01MB6175E15B7672C139E4F1BBBCB6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>
References: <DS7PR07MB7655C4EAB48063E12B6516E4CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
 <YT2PR01MB6175E15B7672C139E4F1BBBCB6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>
Message-ID: <DS7PR07MB7655A7DF7C9FE3ADCA277949CA389@DS7PR07MB7655.namprd07.prod.outlook.com>

Which bulbs did you get and do they have fans?


From: David Templeton <davidt at opentext.com>
Sent: Thursday, November 3, 2022 3:29 PM
To: auprichard uprichard.net <auprichard at uprichard.net>; TR3 Triumphs <triumphs at autox.team.net>; triumphs-owner at autox.team.net
Subject: RE: LED headlight conversion

I got H4 headlights for both the '3a and spitfire ( p700 Tripods in fact ).   I got H4 bulbs off amazon.   Been great.




From: Triumphs <triumphs-bounces at autox.team.net<mailto:triumphs-bounces at autox.team.net>> On Behalf Of auprichard uprichard.net
Sent: Thursday, November 3, 2022 2:33 PM
To: TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>
Subject: [EXTERNAL] - [TR] LED headlight conversion

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. If you feel that the email is suspicious, please report it using PhishAlarm.

Some time ago (2015, actually) Randall Young posted about converting his TR3 to LED headlights:


" I bought Hella H4 headlight conversions from BusDepot.com (who have a  great deal on them at the moment)

http://www.busdepot.com/0301600118<https://urldefense.com/v3/__http:/www.busdepot.com/0301600118__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvIad4Dic$>



 Plus 30 watt LED H4 inserts from eBay, like these

http://tinyurl.com/nwxm7w2<https://urldefense.com/v3/__http:/tinyurl.com/nwxm7w2__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvw0m86F0$>



 There are lots of choices available there and I can't say for sure that these are any better or worse than others.  But I liked the fan

 idea (LEDs are very sensitive to heat and keeping them cool will make them last longer) and felt they were worth trying."



I duly went out and bought exactly what Randall was suggesting, which included 60W 6000LM Cree LED Headlight 30W bulbs (H4 Hi-Lo).



They have lasted well, but one finally went out last night.



I can no longer find the Cree bulbs:  Does anyone have experience with alternative bulbs which would work (ideally with the fan function)?



Andrew Uprichard

Jackson, Michigan



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221103/af521f65/attachment.htm>

From davidt at opentext.com  Thu Nov  3 14:04:19 2022
From: davidt at opentext.com (David Templeton)
Date: Thu, 3 Nov 2022 20:04:19 +0000
Subject: [TR] LED headlight conversion
In-Reply-To: <DS7PR07MB7655A7DF7C9FE3ADCA277949CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
References: <DS7PR07MB7655C4EAB48063E12B6516E4CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
 <YT2PR01MB6175E15B7672C139E4F1BBBCB6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>
 <DS7PR07MB7655A7DF7C9FE3ADCA277949CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
Message-ID: <YT2PR01MB61753E0F4E34F297C35B7727B6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>



https://www.amazon.ca/gp/product/B07V24CL6Y/ref=ppx_yo_dt_b_asin_title_o06_s00



From: auprichard uprichard.net <auprichard at uprichard.net>
Sent: Thursday, November 3, 2022 3:58 PM
To: David Templeton <davidt at opentext.com>; TR3 Triumphs <triumphs at autox.team.net>; triumphs-owner at autox.team.net
Subject: [EXTERNAL] - RE: LED headlight conversion

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. If you feel that the email is suspicious, please report it using PhishAlarm.

Which bulbs did you get and do they have fans?


From: David Templeton <davidt at opentext.com<mailto:davidt at opentext.com>>
Sent: Thursday, November 3, 2022 3:29 PM
To: auprichard uprichard.net <auprichard at uprichard.net<mailto:auprichard at uprichard.net>>; TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>
Subject: RE: LED headlight conversion

I got H4 headlights for both the '3a and spitfire ( p700 Tripods in fact ).   I got H4 bulbs off amazon.   Been great.




From: Triumphs <triumphs-bounces at autox.team.net<mailto:triumphs-bounces at autox.team.net>> On Behalf Of auprichard uprichard.net
Sent: Thursday, November 3, 2022 2:33 PM
To: TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>
Subject: [EXTERNAL] - [TR] LED headlight conversion

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. If you feel that the email is suspicious, please report it using PhishAlarm.

Some time ago (2015, actually) Randall Young posted about converting his TR3 to LED headlights:


" I bought Hella H4 headlight conversions from BusDepot.com (who have a  great deal on them at the moment)

http://www.busdepot.com/0301600118<https://urldefense.com/v3/__http:/www.busdepot.com/0301600118__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvIad4Dic$>



 Plus 30 watt LED H4 inserts from eBay, like these

http://tinyurl.com/nwxm7w2<https://urldefense.com/v3/__http:/tinyurl.com/nwxm7w2__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvw0m86F0$>



 There are lots of choices available there and I can't say for sure that these are any better or worse than others.  But I liked the fan

 idea (LEDs are very sensitive to heat and keeping them cool will make them last longer) and felt they were worth trying."



I duly went out and bought exactly what Randall was suggesting, which included 60W 6000LM Cree LED Headlight 30W bulbs (H4 Hi-Lo).



They have lasted well, but one finally went out last night.



I can no longer find the Cree bulbs:  Does anyone have experience with alternative bulbs which would work (ideally with the fan function)?



Andrew Uprichard

Jackson, Michigan



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221103/aaeb0dea/attachment.htm>

From auprichard at uprichard.net  Thu Nov  3 14:11:01 2022
From: auprichard at uprichard.net (auprichard uprichard.net)
Date: Thu, 3 Nov 2022 20:11:01 +0000
Subject: [TR] LED headlight conversion
In-Reply-To: <YT2PR01MB61753E0F4E34F297C35B7727B6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>
References: <DS7PR07MB7655C4EAB48063E12B6516E4CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
 <YT2PR01MB6175E15B7672C139E4F1BBBCB6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>
 <DS7PR07MB7655A7DF7C9FE3ADCA277949CA389@DS7PR07MB7655.namprd07.prod.outlook.com>
 <YT2PR01MB61753E0F4E34F297C35B7727B6389@YT2PR01MB6175.CANPRD01.PROD.OUTLOOK.COM>
Message-ID: <DS7PR07MB7655D50E50AEBA0ECA545877CA389@DS7PR07MB7655.namprd07.prod.outlook.com>

Thanks!

Now I have to see why there is a disclaimer on my email...................

Andrew

From: David Templeton <davidt at opentext.com>
Sent: Thursday, November 3, 2022 4:04 PM
To: auprichard uprichard.net <auprichard at uprichard.net>; TR3 Triumphs <triumphs at autox.team.net>; triumphs-owner at autox.team.net
Subject: RE: LED headlight conversion



https://www.amazon.ca/gp/product/B07V24CL6Y/ref=ppx_yo_dt_b_asin_title_o06_s00



From: auprichard uprichard.net <auprichard at uprichard.net<mailto:auprichard at uprichard.net>>
Sent: Thursday, November 3, 2022 3:58 PM
To: David Templeton <davidt at opentext.com<mailto:davidt at opentext.com>>; TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>
Subject: [EXTERNAL] - RE: LED headlight conversion

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. If you feel that the email is suspicious, please report it using PhishAlarm.

Which bulbs did you get and do they have fans?


From: David Templeton <davidt at opentext.com<mailto:davidt at opentext.com>>
Sent: Thursday, November 3, 2022 3:29 PM
To: auprichard uprichard.net <auprichard at uprichard.net<mailto:auprichard at uprichard.net>>; TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>
Subject: RE: LED headlight conversion

I got H4 headlights for both the '3a and spitfire ( p700 Tripods in fact ).   I got H4 bulbs off amazon.   Been great.




From: Triumphs <triumphs-bounces at autox.team.net<mailto:triumphs-bounces at autox.team.net>> On Behalf Of auprichard uprichard.net
Sent: Thursday, November 3, 2022 2:33 PM
To: TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>
Subject: [EXTERNAL] - [TR] LED headlight conversion

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. If you feel that the email is suspicious, please report it using PhishAlarm.

Some time ago (2015, actually) Randall Young posted about converting his TR3 to LED headlights:


" I bought Hella H4 headlight conversions from BusDepot.com (who have a  great deal on them at the moment)

http://www.busdepot.com/0301600118<https://urldefense.com/v3/__http:/www.busdepot.com/0301600118__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvIad4Dic$>



 Plus 30 watt LED H4 inserts from eBay, like these

http://tinyurl.com/nwxm7w2<https://urldefense.com/v3/__http:/tinyurl.com/nwxm7w2__;!!Obbck6kTJA!cazjNENel1-9GboTVS8HDCC3spA2VGZSYBAfPNJZ51kh4ZURy4G3D5XC1FDilVZrbUXMDt2E74bfJslvw0m86F0$>



 There are lots of choices available there and I can't say for sure that these are any better or worse than others.  But I liked the fan

 idea (LEDs are very sensitive to heat and keeping them cool will make them last longer) and felt they were worth trying."



I duly went out and bought exactly what Randall was suggesting, which included 60W 6000LM Cree LED Headlight 30W bulbs (H4 Hi-Lo).



They have lasted well, but one finally went out last night.



I can no longer find the Cree bulbs:  Does anyone have experience with alternative bulbs which would work (ideally with the fan function)?



Andrew Uprichard

Jackson, Michigan



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221103/675d1341/attachment.htm>

From cak at dimebank.com  Fri Nov  4 12:38:43 2022
From: cak at dimebank.com (Christopher A Kantarjiev)
Date: Fri, 4 Nov 2022 11:38:43 -0700
Subject: [TR] LED headlight conversion
In-Reply-To: <mailman.5.1667584801.14694.triumphs@autox.team.net>
References: <mailman.5.1667584801.14694.triumphs@autox.team.net>
Message-ID: <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b@dimebank.com>

I recently dug through the current offerings in this space, and decided 
to put in the "Holley Retrobright" sealed beam LED units, made by 
Morimoto. They're ... not cheap, but I liked the idea of fitting an 
entire unit rather than worrying about the alignment and heat issues 
associated with LED capsules in H4 housings.

Also, I was replacing sealed halogens, not an H4, so I would have had 
the expense of decent E-code housings anyway.

I couldn't be happier with how they went in and how they work. No fan. 
Big heat sinks on the housing. Easy/direct electrical connection. I 
opted for "modern white" but you can get "old skool yellowish white" too :-)

https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6


From acstults at hushmail.com  Fri Nov  4 13:55:09 2022
From: acstults at hushmail.com (Allan Stults)
Date: Fri, 04 Nov 2022 12:55:09 -0700
Subject: [TR] LED headlight conversion
In-Reply-To: <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b@dimebank.com>
References: <mailman.5.1667584801.14694.triumphs@autox.team.net>
 <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b@dimebank.com> 
Message-ID: <20221104195509.502FC80E2DD@smtp.hushmail.com>

I like what I read about these lights.  Does positive/negative ground
have any bearing here?  My '62 TR 3 still has positive ground and I
have no intention of changing that.

Allan

On 11/4/2022 at 11:56 AM, "Christopher A Kantarjiev"  wrote:I recently
dug through the current offerings in this space, and decided 
to put in the "Holley Retrobright" sealed beam LED units, made by 
Morimoto. They're ... not cheap, but I liked the idea of fitting an 
entire unit rather than worrying about the alignment and heat issues 
associated with LED capsules in H4 housings.

Also, I was replacing sealed halogens, not an H4, so I would have had 
the expense of decent E-code housings anyway.

I couldn't be happier with how they went in and how they work. No fan.

Big heat sinks on the housing. Easy/direct electrical connection. I 
opted for "modern white" but you can get "old skool yellowish white"
too :-)

https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs 
http://www.team.net/archive

Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/acstults at hushmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/9d57eab2/attachment.htm>

From dave1massey at cs.com  Fri Nov  4 14:25:20 2022
From: dave1massey at cs.com (DAVID MASSEY)
Date: Fri, 4 Nov 2022 20:25:20 +0000 (UTC)
Subject: [TR] LED headlight conversion
In-Reply-To: <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b@dimebank.com>
References: <mailman.5.1667584801.14694.triumphs@autox.team.net>
 <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b@dimebank.com>
Message-ID: <812522609.52629.1667593520804@mail.yahoo.com>

 This guy evaluated a bunch of after market LED headlights and raved about the Holley.
https://www.youtube.com/watch?v=ekMpdKfLlMQ

 
Dave 


 
 
-----Original Message-----
From: Christopher A Kantarjiev <cak at dimebank.com>
To: triumphs at autox.team.net
Sent: Fri, Nov 4, 2022 1:38 pm
Subject: Re: [TR] LED headlight conversion

I recently dug through the current offerings in this space, and decided 
to put in the "Holley Retrobright" sealed beam LED units, made by 
Morimoto. They're ... not cheap, but I liked the idea of fitting an 
entire unit rather than worrying about the alignment and heat issues 
associated with LED capsules in H4 housings.

Also, I was replacing sealed halogens, not an H4, so I would have had 
the expense of decent E-code housings anyway.

I couldn't be happier with how they went in and how they work. No fan. 
Big heat sinks on the housing. Easy/direct electrical connection. I 
opted for "modern white" but you can get "old skool yellowish white" too :-)

https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/99c466f5/attachment.htm>

From auprichard at uprichard.net  Fri Nov  4 14:46:53 2022
From: auprichard at uprichard.net (auprichard uprichard.net)
Date: Fri, 4 Nov 2022 20:46:53 +0000
Subject: [TR] LED headlight conversion
In-Reply-To: <20221104195509.502FC80E2DD@smtp.hushmail.com>
References: <mailman.5.1667584801.14694.triumphs@autox.team.net>
 <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b@dimebank.com>
 <20221104195509.502FC80E2DD@smtp.hushmail.com>
Message-ID: <DS7PR07MB765512F971CC6F489EF4C878CA3B9@DS7PR07MB7655.namprd07.prod.outlook.com>

It does have a bearing. There is some chance that the ballasts provide for reverse polarity, but it doesn't seem very likely to me.  For positive ground, you would need to use relays and make some wiring changes.  It would be easier to reverse the polarity on the car ? a 5 minute job.

Andrew

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Allan Stults
Sent: Friday, November 4, 2022 3:55 PM
To: Christopher A Kantarjiev <cak at dimebank.com>; triumphs at autox.team.net
Subject: Re: [TR] LED headlight conversion

I like what I read about these lights.  Does positive/negative ground have any bearing here?  My '62 TR 3 still has positive ground and I have no intention of changing that.

Allan

On 11/4/2022 at 11:56 AM, "Christopher A Kantarjiev" <cak at dimebank.com<mailto:cak at dimebank.com>> wrote:
I recently dug through the current offerings in this space, and decided
to put in the "Holley Retrobright" sealed beam LED units, made by
Morimoto. They're ... not cheap, but I liked the idea of fitting an
entire unit rather than worrying about the alignment and heat issues
associated with LED capsules in H4 housings.

Also, I was replacing sealed halogens, not an H4, so I would have had
the expense of decent E-code housings anyway.

I couldn't be happier with how they went in and how they work. No fan.
Big heat sinks on the housing. Easy/direct electrical connection. I
opted for "modern white" but you can get "old skool yellowish white" too :-)

https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6

** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/acstults at hushmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/1bfb0838/attachment.htm>

From rrochlin at comcast.net  Fri Nov  4 15:46:08 2022
From: rrochlin at comcast.net (Rochlin Robert)
Date: Fri, 4 Nov 2022 17:46:08 -0400
Subject: [TR] Rear Brake Noise
Message-ID: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>

Hi List,
	I?m getting the weeds with the rear brakes of my TR6.  When I lightly apply the brakes I get metallic clunk.   If I repeatedly apply the brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd them including new shoes.  The brakes are also well adjusted. My thought is that the noise is the brake piston engaging the shoe on the ?fixed side? of the brake piston.  It may have been there before I noticed it, but now that I notice it I?m thinking there may be some way to eliminate the noise I?ve not come to yet. It also may be that, as we said back in the day at Rocky?s Service Station ? don?t worry about it, they all do that??  Other than that the car has been great driving this summer. After much looking I wasn?t able to find a tire shop that could properly balance my wires, but one shop got them close enough to enjoy the car.  The hub on the drive wheel was worn and when I went to one chain tire store to swap over the new spare for the worn tire I was told that company policy was they would not mount / dismount a tire more than 5 years old - never heard that one before. Back at Rocky?s we?d work on anything.
	I hope you all have some happy Fall motoring.  Yikes, daylight savings ends tonight.  I have to read Chris?s headlight post again.
	Best,
	Bob

From fishplate at gmail.com  Fri Nov  4 18:02:29 2022
From: fishplate at gmail.com (Jeff Scarbrough)
Date: Fri, 4 Nov 2022 20:02:29 -0400
Subject: [TR] Rear Brake Noise
In-Reply-To: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
Message-ID: <CAO8Q7CPxsnpFTSxwEemx-2LE3=-n8YhMpNHK98h+9-dGJ2hxeQ@mail.gmail.com>

U joints OK?  Splined half shafts lubricated and in good shape?

Might not be the brakes.  Today's ignition failure turned out to be a fuel
pump that lasted 9 miles.

On Fri, Nov 4, 2022, 18:00 Rochlin Robert <rrochlin at comcast.net> wrote:

> Hi List,
>         I?m getting the weeds with the rear brakes of my TR6.  When I
> lightly apply the brakes I get metallic clunk.   If I repeatedly apply the
> brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd
> them including new shoes.  The brakes are also well adjusted. My thought is
> that the noise is the brake piston engaging the shoe on the ?fixed side? of
> the brake piston.  It may have been there before I noticed it, but now that
> I notice it I?m thinking there may be some way to eliminate the noise I?ve
> not come to yet. It also may be that, as we said back in the day at Rocky?s
> Service Station ? don?t worry about it, they all do that??  Other than that
> the car has been great driving this summer. After much looking I wasn?t
> able to find a tire shop that could properly balance my wires, but one shop
> got them close enough to enjoy the car.  The hub on the drive wheel was
> worn and when I went to one chain tire store to swap over the new spare for
> the worn tire I was told that company policy was they would not mount /
> dismount a tire more than 5 years old - never heard that one before. Back
> at Rocky?s we?d work on anything.
>         I hope you all have some happy Fall motoring.  Yikes, daylight
> savings ends tonight.  I have to read Chris?s headlight post again.
>         Best,
>         Bob
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/fishplate at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/aed97742/attachment.htm>

From jerryvvtr4a at gmail.com  Fri Nov  4 19:28:32 2022
From: jerryvvtr4a at gmail.com (jerryvvtr4a at gmail.com)
Date: Fri, 4 Nov 2022 21:28:32 -0400
Subject: [TR] Rear Brake Noise
In-Reply-To: <CAO8Q7CPxsnpFTSxwEemx-2LE3=-n8YhMpNHK98h+9-dGJ2hxeQ@mail.gmail.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <CAO8Q7CPxsnpFTSxwEemx-2LE3=-n8YhMpNHK98h+9-dGJ2hxeQ@mail.gmail.com>
Message-ID: <044501d8f0b5$eb099450$c11cbcf0$@gmail.com>

Could also be the splined hubs and wire wheels are worn.

 

 

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Jeff Scarbrough
Sent: Friday, November 4, 2022 8:02 PM
To: Rochlin Robert <rrochlin at comcast.net>
Cc: TR3 Triumphs <triumphs at autox.team.net>; Triumph 6 Pack <6pack at autox.team.net>
Subject: Re: [TR] Rear Brake Noise

 

U joints OK?  Splined half shafts lubricated and in good shape?

 

Might not be the brakes.  Today's ignition failure turned out to be a fuel pump that lasted 9 miles.  

 

On Fri, Nov 4, 2022, 18:00 Rochlin Robert <rrochlin at comcast.net <mailto:rrochlin at comcast.net> > wrote:

Hi List,
        I?m getting the weeds with the rear brakes of my TR6.  When I lightly apply the brakes I get metallic clunk.   If I repeatedly apply the brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd them including new shoes.  The brakes are also well adjusted. My thought is that the noise is the brake piston engaging the shoe on the ?fixed side? of the brake piston.  It may have been there before I noticed it, but now that I notice it I?m thinking there may be some way to eliminate the noise I?ve not come to yet. It also may be that, as we said back in the day at Rocky?s Service Station ? don?t worry about it, they all do that??  Other than that the car has been great driving this summer. After much looking I wasn?t able to find a tire shop that could properly balance my wires, but one shop got them close enough to enjoy the car.  The hub on the drive wheel was worn and when I went to one chain tire store to swap over the new spare for the worn tire I was told that company policy was they would not mount / dismount a tire more than 5 years old - never heard that one before. Back at Rocky?s we?d work on anything.
        I hope you all have some happy Fall motoring.  Yikes, daylight savings ends tonight.  I have to read Chris?s headlight post again.
        Best,
        Bob
** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fishplate at gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/dbd7d6a2/attachment.htm>

From cak at dimebank.com  Sat Nov  5 20:37:47 2022
From: cak at dimebank.com (Chris Kantarjiev)
Date: Sat, 05 Nov 2022 19:37:47 -0700
Subject: [TR] Rear Brake Noise
In-Reply-To: <mailman.7.1667671203.26186.triumphs@autox.team.net>
References: <mailman.7.1667671203.26186.triumphs@autox.team.net>
Message-ID: <D15D04C4-D0D8-40B9-9338-51E18F6569DD@dimebank.com>

Clunks from the rear when braking should always leave you suspicious of the U joints and possibly the diff mounts.

On November 5, 2022 11:00:03 AM PDT, triumphs-request at autox.team.net wrote:
>Send Triumphs mailing list submissions to
>	triumphs at autox.team.net
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	http://autox.team.net/mailman/listinfo/triumphs
>or, via email, send a message with subject or body 'help' to
>	triumphs-request at autox.team.net
>
>You can reach the person managing the list at
>	triumphs-owner at autox.team.net
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Triumphs digest..."
>
>
>Today's Topics:
>
>   1. Re: LED headlight conversion (Christopher A Kantarjiev)
>   2. Re: LED headlight conversion (Allan Stults)
>   3. Re: LED headlight conversion (DAVID MASSEY)
>   4. Re: LED headlight conversion (auprichard uprichard.net)
>   5. Rear Brake Noise (Rochlin Robert)
>   6. Re: Rear Brake Noise (Jeff Scarbrough)
>   7. Re: Rear Brake Noise (jerryvvtr4a at gmail.com)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Fri, 4 Nov 2022 11:38:43 -0700
>From: Christopher A Kantarjiev <cak at dimebank.com>
>To: triumphs at autox.team.net
>Subject: Re: [TR] LED headlight conversion
>Message-ID: <1819a9d6-6059-c3bb-b7cd-46e7511c5b8b at dimebank.com>
>Content-Type: text/plain; charset=UTF-8; format=flowed
>
>I recently dug through the current offerings in this space, and decided 
>to put in the "Holley Retrobright" sealed beam LED units, made by 
>Morimoto. They're ... not cheap, but I liked the idea of fitting an 
>entire unit rather than worrying about the alignment and heat issues 
>associated with LED capsules in H4 housings.
>
>Also, I was replacing sealed halogens, not an H4, so I would have had 
>the expense of decent E-code housings anyway.
>
>I couldn't be happier with how they went in and how they work. No fan. 
>Big heat sinks on the housing. Easy/direct electrical connection. I 
>opted for "modern white" but you can get "old skool yellowish white" too :-)
>
>https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6
>
>
>
>------------------------------
>
>Message: 2
>Date: Fri, 04 Nov 2022 12:55:09 -0700
>From: "Allan Stults" <acstults at hushmail.com>
>To: "Christopher A Kantarjiev" <cak at dimebank.com>,
>	triumphs at autox.team.net
>Subject: Re: [TR] LED headlight conversion
>Message-ID: <20221104195509.502FC80E2DD at smtp.hushmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>I like what I read about these lights.  Does positive/negative ground
>have any bearing here?  My '62 TR 3 still has positive ground and I
>have no intention of changing that.
>
>Allan
>
>On 11/4/2022 at 11:56 AM, "Christopher A Kantarjiev"  wrote:I recently
>dug through the current offerings in this space, and decided 
>to put in the "Holley Retrobright" sealed beam LED units, made by 
>Morimoto. They're ... not cheap, but I liked the idea of fitting an 
>entire unit rather than worrying about the alignment and heat issues 
>associated with LED capsules in H4 housings.
>
>Also, I was replacing sealed halogens, not an H4, so I would have had 
>the expense of decent E-code housings anyway.
>
>I couldn't be happier with how they went in and how they work. No fan.
>
>Big heat sinks on the housing. Easy/direct electrical connection. I 
>opted for "modern white" but you can get "old skool yellowish white"
>too :-)
>
>https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6
>
>** triumphs at autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/pipermail/triumphs 
>http://www.team.net/archive
>
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/acstults at hushmail.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/9d57eab2/attachment-0001.htm>
>
>------------------------------
>
>Message: 3
>Date: Fri, 4 Nov 2022 20:25:20 +0000 (UTC)
>From: DAVID MASSEY <dave1massey at cs.com>
>To: "cak at dimebank.com" <cak at dimebank.com>,  "triumphs at autox.team.net"
>	<triumphs at autox.team.net>
>Subject: Re: [TR] LED headlight conversion
>Message-ID: <812522609.52629.1667593520804 at mail.yahoo.com>
>Content-Type: text/plain; charset="utf-8"
>
> This guy evaluated a bunch of after market LED headlights and raved about the Holley.
>https://www.youtube.com/watch?v=ekMpdKfLlMQ
>
> 
>Dave 
>
>
> 
> 
>-----Original Message-----
>From: Christopher A Kantarjiev <cak at dimebank.com>
>To: triumphs at autox.team.net
>Sent: Fri, Nov 4, 2022 1:38 pm
>Subject: Re: [TR] LED headlight conversion
>
>I recently dug through the current offerings in this space, and decided 
>to put in the "Holley Retrobright" sealed beam LED units, made by 
>Morimoto. They're ... not cheap, but I liked the idea of fitting an 
>entire unit rather than worrying about the alignment and heat issues 
>associated with LED capsules in H4 housings.
>
>Also, I was replacing sealed halogens, not an H4, so I would have had 
>the expense of decent E-code housings anyway.
>
>I couldn't be happier with how they went in and how they work. No fan. 
>Big heat sinks on the housing. Easy/direct electrical connection. I 
>opted for "modern white" but you can get "old skool yellowish white" too :-)
>
>https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/99c466f5/attachment-0001.htm>
>
>------------------------------
>
>Message: 4
>Date: Fri, 4 Nov 2022 20:46:53 +0000
>From: auprichard uprichard.net <auprichard at uprichard.net>
>To: Allan Stults <acstults at hushmail.com>, Christopher A Kantarjiev
>	<cak at dimebank.com>, "triumphs at autox.team.net"
>	<triumphs at autox.team.net>
>Subject: Re: [TR] LED headlight conversion
>Message-ID:
>	<DS7PR07MB765512F971CC6F489EF4C878CA3B9 at DS7PR07MB7655.namprd07.prod.outlook.com>
>	
>Content-Type: text/plain; charset="utf-8"
>
>It does have a bearing. There is some chance that the ballasts provide for reverse polarity, but it doesn't seem very likely to me.  For positive ground, you would need to use relays and make some wiring changes.  It would be easier to reverse the polarity on the car ? a 5 minute job.
>
>Andrew
>
>From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Allan Stults
>Sent: Friday, November 4, 2022 3:55 PM
>To: Christopher A Kantarjiev <cak at dimebank.com>; triumphs at autox.team.net
>Subject: Re: [TR] LED headlight conversion
>
>I like what I read about these lights.  Does positive/negative ground have any bearing here?  My '62 TR 3 still has positive ground and I have no intention of changing that.
>
>Allan
>
>On 11/4/2022 at 11:56 AM, "Christopher A Kantarjiev" <cak at dimebank.com<mailto:cak at dimebank.com>> wrote:
>I recently dug through the current offerings in this space, and decided
>to put in the "Holley Retrobright" sealed beam LED units, made by
>Morimoto. They're ... not cheap, but I liked the idea of fitting an
>entire unit rather than worrying about the alignment and heat issues
>associated with LED capsules in H4 housings.
>
>Also, I was replacing sealed halogens, not an H4, so I would have had
>the expense of decent E-code housings anyway.
>
>I couldn't be happier with how they went in and how they work. No fan.
>Big heat sinks on the housing. Easy/direct electrical connection. I
>opted for "modern white" but you can get "old skool yellowish white" too :-)
>
>https://www.theretrofitsource.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-7-Round_6
>
>** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
>
>Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/acstults at hushmail.com
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/1bfb0838/attachment-0001.htm>
>
>------------------------------
>
>Message: 5
>Date: Fri, 4 Nov 2022 17:46:08 -0400
>From: Rochlin Robert <rrochlin at comcast.net>
>To: "6pack at autox.team.net" <6pack at autox.team.net>, TR3 Triumphs
>	<triumphs at autox.team.net>
>Subject: [TR] Rear Brake Noise
>Message-ID: <51FA8D9A-7A64-4016-BE79-9ADE60017660 at comcast.net>
>Content-Type: text/plain;	charset=utf-8
>
>Hi List,
>	I?m getting the weeds with the rear brakes of my TR6.  When I lightly apply the brakes I get metallic clunk.   If I repeatedly apply the brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd them including new shoes.  The brakes are also well adjusted. My thought is that the noise is the brake piston engaging the shoe on the ?fixed side? of the brake piston.  It may have been there before I noticed it, but now that I notice it I?m thinking there may be some way to eliminate the noise I?ve not come to yet. It also may be that, as we said back in the day at Rocky?s Service Station ? don?t worry about it, they all do that??  Other than that the car has been great driving this summer. After much looking I wasn?t able to find a tire shop that could properly balance my wires, but one shop got them close enough to enjoy the car.  The hub on the drive wheel was worn and when I went to one chain tire store to swap over the new spare for the worn tire I was told that company
>  policy was they would not mount / dismount a tire more than 5 years old - never heard that one before. Back at Rocky?s we?d work on anything.
>	I hope you all have some happy Fall motoring.  Yikes, daylight savings ends tonight.  I have to read Chris?s headlight post again.
>	Best,
>	Bob
>
>------------------------------
>
>Message: 6
>Date: Fri, 4 Nov 2022 20:02:29 -0400
>From: Jeff Scarbrough <fishplate at gmail.com>
>To: Rochlin Robert <rrochlin at comcast.net>
>Cc: Triumph 6 Pack <6pack at autox.team.net>, TR3 Triumphs
>	<triumphs at autox.team.net>
>Subject: Re: [TR] Rear Brake Noise
>Message-ID:
>	<CAO8Q7CPxsnpFTSxwEemx-2LE3=-n8YhMpNHK98h+9-dGJ2hxeQ at mail.gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>U joints OK?  Splined half shafts lubricated and in good shape?
>
>Might not be the brakes.  Today's ignition failure turned out to be a fuel
>pump that lasted 9 miles.
>
>On Fri, Nov 4, 2022, 18:00 Rochlin Robert <rrochlin at comcast.net> wrote:
>
>> Hi List,
>>         I?m getting the weeds with the rear brakes of my TR6.  When I
>> lightly apply the brakes I get metallic clunk.   If I repeatedly apply the
>> brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd
>> them including new shoes.  The brakes are also well adjusted. My thought is
>> that the noise is the brake piston engaging the shoe on the ?fixed side? of
>> the brake piston.  It may have been there before I noticed it, but now that
>> I notice it I?m thinking there may be some way to eliminate the noise I?ve
>> not come to yet. It also may be that, as we said back in the day at Rocky?s
>> Service Station ? don?t worry about it, they all do that??  Other than that
>> the car has been great driving this summer. After much looking I wasn?t
>> able to find a tire shop that could properly balance my wires, but one shop
>> got them close enough to enjoy the car.  The hub on the drive wheel was
>> worn and when I went to one chain tire store to swap over the new spare for
>> the worn tire I was told that company policy was they would not mount /
>> dismount a tire more than 5 years old - never heard that one before. Back
>> at Rocky?s we?d work on anything.
>>         I hope you all have some happy Fall motoring.  Yikes, daylight
>> savings ends tonight.  I have to read Chris?s headlight post again.
>>         Best,
>>         Bob
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs
>> http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/fishplate at gmail.com
>>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/aed97742/attachment-0001.htm>
>
>------------------------------
>
>Message: 7
>Date: Fri, 4 Nov 2022 21:28:32 -0400
>From: <jerryvvtr4a at gmail.com>
>To: "'Jeff Scarbrough'" <fishplate at gmail.com>, "'Rochlin Robert'"
>	<rrochlin at comcast.net>
>Cc: "'TR3 Triumphs'" <triumphs at autox.team.net>, "'Triumph 6 Pack'"
>	<6pack at autox.team.net>
>Subject: Re: [TR] Rear Brake Noise
>Message-ID: <044501d8f0b5$eb099450$c11cbcf0$@gmail.com>
>Content-Type: text/plain; charset="utf-8"
>
>Could also be the splined hubs and wire wheels are worn.
>
> 
>
> 
>
>From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Jeff Scarbrough
>Sent: Friday, November 4, 2022 8:02 PM
>To: Rochlin Robert <rrochlin at comcast.net>
>Cc: TR3 Triumphs <triumphs at autox.team.net>; Triumph 6 Pack <6pack at autox.team.net>
>Subject: Re: [TR] Rear Brake Noise
>
> 
>
>U joints OK?  Splined half shafts lubricated and in good shape?
>
> 
>
>Might not be the brakes.  Today's ignition failure turned out to be a fuel pump that lasted 9 miles.  
>
> 
>
>On Fri, Nov 4, 2022, 18:00 Rochlin Robert <rrochlin at comcast.net <mailto:rrochlin at comcast.net> > wrote:
>
>Hi List,
>        I?m getting the weeds with the rear brakes of my TR6.  When I lightly apply the brakes I get metallic clunk.   If I repeatedly apply the brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd them including new shoes.  The brakes are also well adjusted. My thought is that the noise is the brake piston engaging the shoe on the ?fixed side? of the brake piston.  It may have been there before I noticed it, but now that I notice it I?m thinking there may be some way to eliminate the noise I?ve not come to yet. It also may be that, as we said back in the day at Rocky?s Service Station ? don?t worry about it, they all do that??  Other than that the car has been great driving this summer. After much looking I wasn?t able to find a tire shop that could properly balance my wires, but one shop got them close enough to enjoy the car.  The hub on the drive wheel was worn and when I went to one chain tire store to swap over the new spare for the worn tire I was told that 
> company policy was they would not mount / dismount a tire more than 5 years old - never heard that one before. Back at Rocky?s we?d work on anything.
>        I hope you all have some happy Fall motoring.  Yikes, daylight savings ends tonight.  I have to read Chris?s headlight post again.
>        Best,
>        Bob
>** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
>Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fishplate at gmail.com
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <http://autox.team.net/pipermail/triumphs/attachments/20221104/dbd7d6a2/attachment-0001.htm>
>
>------------------------------
>
>Subject: Digest Footer
>
>_______________________________________________
>
>Triumphs mailing list
>Triumphs at autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>
>------------------------------
>
>End of Triumphs Digest, Vol 15, Issue 184
>*****************************************

From lee at automate-it.com  Sun Nov  6 20:06:01 2022
From: lee at automate-it.com (lee at automate-it.com)
Date: Sun, 06 Nov 2022 21:06:01 -0600
Subject: [TR] Tire valve stems - TR6 original wheels
In-Reply-To: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
Message-ID: <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>

I've just switched from wire wheels to original TR6 wheels, although 
with aftermarket chrome trim rings. But the wheels are fitted with 
standard tire valve stems - and they don't protrude beyond the cutout in 
the trim rings. So it's almost impossible to fill the tire or use a 
pressure gauge. (worth-1000-words photo attached)

I'm assuming there are longer tire valve stems available? I'm looking at 
replacing the tires, so it's a particularly convenient time to get this 
right. I've also seen valve stem "extenders" (one of my spare wheels had 
one of these fitted) - but this does not look like a decent alternative. 
Suggestions?

Thanks!
  Lee
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ValveStem.jpg
Type: image/jpeg
Size: 47403 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221106/46ed27bd/attachment.jpg>

From fishplate at gmail.com  Mon Nov  7 03:35:49 2022
From: fishplate at gmail.com (Jeff Scarbrough)
Date: Mon, 7 Nov 2022 05:35:49 -0500
Subject: [TR] Tire valve stems - TR6 original wheels
In-Reply-To: <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>
Message-ID: <CAO8Q7CPy0ixDWnRdPYdDDuFkh0QA=wGVi6KQ-OLwTqAaOsDC5Q@mail.gmail.com>

Longer stems are available.  Show them your trim rings (or the picture)
when you go to your tire store.  Don't leave the trim rings on the wheel at
the tire store, though.

On Sun, Nov 6, 2022, 22:35 <lee at automate-it.com> wrote:

> I've just switched from wire wheels to original TR6 wheels, although
> with aftermarket chrome trim rings. But the wheels are fitted with
> standard tire valve stems - and they don't protrude beyond the cutout in
> the trim rings. So it's almost impossible to fill the tire or use a
> pressure gauge. (worth-1000-words photo attached)
>
> I'm assuming there are longer tire valve stems available? I'm looking at
> replacing the tires, so it's a particularly convenient time to get this
> right. I've also seen valve stem "extenders" (one of my spare wheels had
> one of these fitted) - but this does not look like a decent alternative.
> Suggestions?
>
> Thanks!
>   Lee** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/fishplate at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/46391cee/attachment.htm>

From auprichard at uprichard.net  Sat Nov  5 06:17:13 2022
From: auprichard at uprichard.net (auprichard uprichard.net)
Date: Sat, 5 Nov 2022 12:17:13 +0000
Subject: [TR] Rear Brake Noise
In-Reply-To: <044501d8f0b5$eb099450$c11cbcf0$@gmail.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <CAO8Q7CPxsnpFTSxwEemx-2LE3=-n8YhMpNHK98h+9-dGJ2hxeQ@mail.gmail.com>
 <044501d8f0b5$eb099450$c11cbcf0$@gmail.com>
Message-ID: <DS7PR07MB7655554249AD6E4B02CC3CAECA3A9@DS7PR07MB7655.namprd07.prod.outlook.com>

If you are having issues balancing wire wheels, I strongly recommend Alan Hendrix at Hendrix Wire Wheel.  The only person who could sort out the wobble in my TR5.

Otherwise, as others have suggested, U-joints, drive shafts, maybe shock mounts.

Andrew Uprichard

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of jerryvvtr4a at gmail.com
Sent: Friday, November 4, 2022 9:29 PM
To: 'Jeff Scarbrough' <fishplate at gmail.com>; 'Rochlin Robert' <rrochlin at comcast.net>
Cc: 'TR3 Triumphs' <triumphs at autox.team.net>; 'Triumph 6 Pack' <6pack at autox.team.net>
Subject: Re: [TR] Rear Brake Noise

Could also be the splined hubs and wire wheels are worn.


From: Triumphs <triumphs-bounces at autox.team.net<mailto:triumphs-bounces at autox.team.net>> On Behalf Of Jeff Scarbrough
Sent: Friday, November 4, 2022 8:02 PM
To: Rochlin Robert <rrochlin at comcast.net<mailto:rrochlin at comcast.net>>
Cc: TR3 Triumphs <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>; Triumph 6 Pack <6pack at autox.team.net<mailto:6pack at autox.team.net>>
Subject: Re: [TR] Rear Brake Noise

U joints OK?  Splined half shafts lubricated and in good shape?

Might not be the brakes.  Today's ignition failure turned out to be a fuel pump that lasted 9 miles.

On Fri, Nov 4, 2022, 18:00 Rochlin Robert <rrochlin at comcast.net<mailto:rrochlin at comcast.net>> wrote:
Hi List,
        I?m getting the weeds with the rear brakes of my TR6.  When I lightly apply the brakes I get metallic clunk.   If I repeatedly apply the brakes lightly the clunk gets more pronounced. I?ve carefully R and R'd them including new shoes.  The brakes are also well adjusted. My thought is that the noise is the brake piston engaging the shoe on the ?fixed side? of the brake piston.  It may have been there before I noticed it, but now that I notice it I?m thinking there may be some way to eliminate the noise I?ve not come to yet. It also may be that, as we said back in the day at Rocky?s Service Station ? don?t worry about it, they all do that??  Other than that the car has been great driving this summer. After much looking I wasn?t able to find a tire shop that could properly balance my wires, but one shop got them close enough to enjoy the car.  The hub on the drive wheel was worn and when I went to one chain tire store to swap over the new spare for the worn tire I was told that company policy was they would not mount / dismount a tire more than 5 years old - never heard that one before. Back at Rocky?s we?d work on anything.
        I hope you all have some happy Fall motoring.  Yikes, daylight savings ends tonight.  I have to read Chris?s headlight post again.
        Best,
        Bob
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/fishplate at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221105/ad5612b7/attachment.htm>

From grglmn at gmail.com  Mon Nov  7 07:36:05 2022
From: grglmn at gmail.com (Greg Lemon)
Date: Mon, 7 Nov 2022 08:36:05 -0600
Subject: [TR] [6pack] Tire valve stems - TR6 original wheels
In-Reply-To: <CA+aQ7wzEUMaydp3h8Q==kDsEfhdVs2=9BH1nEg3E4+T9VhA6BQ@mail.gmail.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>
 <CA+aQ7wzEUMaydp3h8Q==kDsEfhdVs2=9BH1nEg3E4+T9VhA6BQ@mail.gmail.com>
Message-ID: <CAFtw3aZbEyUe=ZO8Q6hreRkiCpqGVC+oB0fdOtE+fzD6nmDLCQ@mail.gmail.com>

Something like this work to check pressure, or is it too far in there to
get the cap off?
https://www.amazon.com/Victor-22-5-60108-8-Dial-Gauge-Flexible/dp/B009XAR2CM/ref=asc_df_B009XAR2CM/?tag=hyprod-20&linkCode=df0&hvadid=316708741155&hvpos=&hvnetw=g&hvrand=16443411556251352787&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9024740&hvtargid=pla-598947080609&psc=1

On Mon, Nov 7, 2022, 8:27 AM rmf3860 rmf3860 <bobfabie at gmail.com> wrote:

> Hi Lee,
>
> The best solution is to have longer valve stems installed, but that
> requires dismounting the wheels.
>
> The alternative you suggested should work, but my experience is they leak
> and often don?t allow air to flow them to the shorter valve stem. It may be
> worth a try. Otherwise, you?ll just have to remove the beauty rings
> whenever you check the air pressure.
>
> Bob
>
> On Sun, Nov 6, 2022 at 10:10 PM <lee at automate-it.com> wrote:
>
>> I've just switched from wire wheels to original TR6 wheels, although
>> with aftermarket chrome trim rings. But the wheels are fitted with
>> standard tire valve stems - and they don't protrude beyond the cutout in
>> the trim rings. So it's almost impossible to fill the tire or use a
>> pressure gauge. (worth-1000-words photo attached)
>>
>> I'm assuming there are longer tire valve stems available? I'm looking at
>> replacing the tires, so it's a particularly convenient time to get this
>> right. I've also seen valve stem "extenders" (one of my spare wheels had
>> one of these fitted) - but this does not look like a decent alternative.
>> Suggestions?
>>
>> Thanks!
>>   Lee_______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.96
>> Archive: http://www.team.net/archive
>>
>>
>> 6pack at autox.team.net
>> http://autox.team.net/mailman/listinfo/6pack
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/6pack/bobfabie at gmail.com
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
>
>
> 6pack at autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/grglmn at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/18eee880/attachment.htm>

From lee at automate-it.com  Mon Nov  7 08:21:03 2022
From: lee at automate-it.com (lee at automate-it.com)
Date: Mon, 07 Nov 2022 09:21:03 -0600
Subject: [TR] [6pack] Tire valve stems - TR6 original wheels
In-Reply-To: <CAFtw3aZbEyUe=ZO8Q6hreRkiCpqGVC+oB0fdOtE+fzD6nmDLCQ@mail.gmail.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>
 <CA+aQ7wzEUMaydp3h8Q==kDsEfhdVs2=9BH1nEg3E4+T9VhA6BQ@mail.gmail.com>
 <CAFtw3aZbEyUe=ZO8Q6hreRkiCpqGVC+oB0fdOtE+fzD6nmDLCQ@mail.gmail.com>
Message-ID: <17b33bd2a5e43c5701667d4e617d1414@automate-it.com>

Thanks for the suggestions - and yes, I found that longer ones are easy 
to get just about anywhere (but I asked here first because I trust the 
collective TR mind!). And as I mentioned, I'm about to replace the tires 
so this will just be part of the process.

  Cheers!
  Lee

On 2022-11-07 08:36, Greg Lemon wrote:

> Something like this work to check pressure, or is it too far in there 
> to get the cap off?  
> https://www.amazon.com/Victor-22-5-60108-8-Dial-Gauge-Flexible/dp/B009XAR2CM/ref=asc_df_B009XAR2CM/?tag=hyprod-20&linkCode=df0&hvadid=316708741155&hvpos=&hvnetw=g&hvrand=16443411556251352787&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9024740&hvtargid=pla-598947080609&psc=1
> 
> On Mon, Nov 7, 2022, 8:27 AM rmf3860 rmf3860 <bobfabie at gmail.com> 
> wrote:
> Hi Lee,
> 
> The best solution is to have longer valve stems installed, but that 
> requires dismounting the wheels.
> 
> The alternative you suggested should work, but my experience is they 
> leak and often don't allow air to flow them to the shorter valve stem. 
> It may be worth a try. Otherwise, you'll just have to remove the beauty 
> rings whenever you check the air pressure.
> 
> Bob
> 
> On Sun, Nov 6, 2022 at 10:10 PM <lee at automate-it.com> wrote: I've just 
> switched from wire wheels to original TR6 wheels, although
> with aftermarket chrome trim rings. But the wheels are fitted with
> standard tire valve stems - and they don't protrude beyond the cutout 
> in
> the trim rings. So it's almost impossible to fill the tire or use a
> pressure gauge. (worth-1000-words photo attached)
> 
> I'm assuming there are longer tire valve stems available? I'm looking 
> at
> replacing the tires, so it's a particularly convenient time to get this
> right. I've also seen valve stem "extenders" (one of my spare wheels 
> had
> one of these fitted) - but this does not look like a decent 
> alternative.
> Suggestions?
> 
> Thanks!
> Lee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/3015d5c8/attachment.htm>

From paradisemusicnc at gmail.com  Mon Nov  7 08:33:35 2022
From: paradisemusicnc at gmail.com (Bryan Loy)
Date: Mon, 7 Nov 2022 10:33:35 -0500
Subject: [TR] Change email address
Message-ID: <CAPe+S2T1JzY9smAcF+OkDjsGQJDFLyL_=Cci8t46=y+hAx1B2A@mail.gmail.com>

Good day.  Please delete paradisemusicnc at gmail.com,   New email is
bryan at paradisemusicnc.com.  Thank you!

-- 
Bryan C. Loy
Paradise Music
Franklin, N.C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/173abd71/attachment.htm>

From davgil at aol.com  Mon Nov  7 09:08:57 2022
From: davgil at aol.com (davgil at aol.com)
Date: Mon, 7 Nov 2022 16:08:57 +0000 (UTC)
Subject: [TR] 1976 TR6 alternator
References: <692174819.1038877.1667837337562.ref@mail.yahoo.com>
Message-ID: <692174819.1038877.1667837337562@mail.yahoo.com>

Good morning,I seem to recall that someone on this list had an alternate for the 1976 TR6 43 amp alternator.? Needed to ask for an earlier Ford or something similar.? Does anyone know of a cross reference to the basic alternator?? Thanks,David Gill1976 TR6
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/c445063a/attachment.htm>

From dave at ranteer.com  Mon Nov  7 09:42:16 2022
From: dave at ranteer.com (dave northrup)
Date: Mon, 7 Nov 2022 16:42:16 +0000
Subject: [TR] [6pack] Tire valve stems - TR6 original wheels
In-Reply-To: <CAFtw3aZbEyUe=ZO8Q6hreRkiCpqGVC+oB0fdOtE+fzD6nmDLCQ@mail.gmail.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>
 <CA+aQ7wzEUMaydp3h8Q==kDsEfhdVs2=9BH1nEg3E4+T9VhA6BQ@mail.gmail.com>
 <CAFtw3aZbEyUe=ZO8Q6hreRkiCpqGVC+oB0fdOtE+fzD6nmDLCQ@mail.gmail.com>
Message-ID: <902f2e592ec24fd7b864746d523e1be7@ranteer.com>

I just really have to ask ? why would you switch to TR6 stock wheels?  They are expensive to get redone, really aren?t very good wheels, aren?t very good looking, require the trim ring which isn?t very attractive and is a general pain.  There are so many good choices for wheels these days.

I did keep mine for over a decade before my co-owner and co-driver son insisted we upgrade to Konig Rewinds.  They are wider, better looking, and just better wheels.   So glad we switched   https://www.ranteer.com/davescars/tr6/Resized_20190929_161509.jpg

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/9453a615/attachment.htm>

From bkahler1 at gmail.com  Mon Nov  7 12:07:22 2022
From: bkahler1 at gmail.com (Brad Kahler)
Date: Mon, 7 Nov 2022 14:07:22 -0500
Subject: [TR] 1976 TR6 alternator
In-Reply-To: <692174819.1038877.1667837337562@mail.yahoo.com>
References: <692174819.1038877.1667837337562.ref@mail.yahoo.com>
 <692174819.1038877.1667837337562@mail.yahoo.com>
Message-ID: <CADm3DLGvPewEO5pK_3cBY=jsm5BOE78He+tKohANc5C-wkKCAw@mail.gmail.com>

For my 72 TR6 I installed a mini Denso 70 amp alternator.  I used a
generator bracket from a TR4 (slightly recurved) and the stock round spacer
shortened a little bit.

[image: 20170814_191726.jpg]

[image: 20221016_141456.jpg]

On Mon, Nov 7, 2022 at 1:45 PM <davgil at aol.com> wrote:

> Good morning,
> I seem to recall that someone on this list had an alternate for the 1976
> TR6 43 amp alternator.  Needed to ask for an earlier Ford or something
> similar.  Does anyone know of a cross reference to the basic alternator?
> Thanks,
> David Gill
> 1976 TR6
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/bkahler1 at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/66313849/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20170814_191726.jpg
Type: image/jpeg
Size: 650855 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/66313849/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221016_141456.jpg
Type: image/jpeg
Size: 621996 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/66313849/attachment-0001.jpg>

From rrochlin at comcast.net  Mon Nov  7 14:48:42 2022
From: rrochlin at comcast.net (Robert Rochlin)
Date: Mon, 7 Nov 2022 16:48:42 -0500
Subject: [TR] [6pack] Tire valve stems - TR6 original wheels
In-Reply-To: <902f2e592ec24fd7b864746d523e1be7@ranteer.com>
References: <902f2e592ec24fd7b864746d523e1be7@ranteer.com>
Message-ID: <B78C7AC3-3E8E-4E51-BD51-AF01BD6694B6@comcast.net>

Lots of folks opt for originality. That?s part the fun of making the car your own.
Best,
 Bob

Sent from my iPhone

> On Nov 7, 2022, at 2:34 PM, dave northrup <dave at ranteer.com> wrote:
> 
> ?
> I just really have to ask ? why would you switch to TR6 stock wheels?  They are expensive to get redone, really aren?t very good wheels, aren?t very good looking, require the trim ring which isn?t very attractive and is a general pain.  There are so many good choices for wheels these days.
>  
> I did keep mine for over a decade before my co-owner and co-driver son insisted we upgrade to Konig Rewinds.  They are wider, better looking, and just better wheels.   So glad we switched   https://www.ranteer.com/davescars/tr6/Resized_20190929_161509.jpg
>  
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/rrochlin at comcast.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/18fc1907/attachment.htm>

From lee at automate-it.com  Mon Nov  7 18:12:25 2022
From: lee at automate-it.com (lee at automate-it.com)
Date: Mon, 07 Nov 2022 19:12:25 -0600
Subject: [TR] [6pack] Tire valve stems - TR6 original wheels
In-Reply-To: <902f2e592ec24fd7b864746d523e1be7@ranteer.com>
References: <51FA8D9A-7A64-4016-BE79-9ADE60017660@comcast.net>
 <a4b909502e98463ca6fbf0cc880ebf25@automate-it.com>
 <CA+aQ7wzEUMaydp3h8Q==kDsEfhdVs2=9BH1nEg3E4+T9VhA6BQ@mail.gmail.com>
 <CAFtw3aZbEyUe=ZO8Q6hreRkiCpqGVC+oB0fdOtE+fzD6nmDLCQ@mail.gmail.com>
 <902f2e592ec24fd7b864746d523e1be7@ranteer.com>
Message-ID: <5394135e4b99c4288d2c39b3d612ad91@automate-it.com>

> why would you switch to TR6 stock wheels?

Easy answer - I really like the look of the original design. And for me, 
the best look is with the original aluminum trim rings - beautiful. I'm 
currently using aftermarket chrome rings, because I only have three 
aluminum ones in good condition (and one or two that are beat up). And I 
just switched to these original wheels from wires that I had on for the 
last several years. Now --- talk about wheels that are "not very good" 
!! I'm really glad to be done with those.

There are also several nice aftermarket wheels that I like. I happen to 
have a second TR6 (hasn't run in a long time!) that's going to need a 
nice set of wheel, I keep an eye on what's available pretty often.

Enjoy the ride!
  Lee

On 2022-11-07 10:42, dave northrup wrote:

> I just really have to ask - why would you switch to TR6 stock wheels?  
> They are expensive to get redone, really aren't very good wheels, 
> aren't very good looking, require the trim ring which isn't very 
> attractive and is a general pain.  There are so many good choices for 
> wheels these days.
> 
> I did keep mine for over a decade before my co-owner and co-driver son 
> insisted we upgrade to Konig Rewinds.  They are wider, better looking, 
> and just better wheels.   So glad we switched   
> https://www.ranteer.com/davescars/tr6/Resized_20190929_161509.jpg
> 
>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221107/ab46131e/attachment.htm>

From johnbmacartney at gmx.com  Tue Nov  8 13:47:39 2022
From: johnbmacartney at gmx.com (johnbmacartney at gmx.com)
Date: Tue, 8 Nov 2022 20:47:39 -0000
Subject: [TR] Triumphs Digest, Vol 15, Issue 187
In-Reply-To: <mailman.6.1667934002.15758.triumphs@autox.team.net>
References: <mailman.6.1667934002.15758.triumphs@autox.team.net>
Message-ID: <008d01d8f3b3$57857810$06906830$@gmx.com>

Re the query for longer tyre valves.

Throughout the UK and Europe you can ask to have longer reach valve stems
fitted at the time your new tyres are fitted or the wheels are rebalanced.
>From memory, they are about three quarters of an inch longer than the usual
ones. I've never had to pay extra for longer valves - or if I've had to, and
forgotten, the cost was minimal and probably pennies rather than pounds.

Jonmac

-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of
triumphs-request at autox.team.net
Sent: 08 November 2022 19:00
To: triumphs at autox.team.net
Subject: Triumphs Digest, Vol 15, Issue 187

Send Triumphs mailing list submissions to
	triumphs at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://autox.team.net/mailman/listinfo/triumphs
or, via email, send a message with subject or body 'help' to
	triumphs-request at autox.team.net

You can reach the person managing the list at
	triumphs-owner at autox.team.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Triumphs digest..."


From lee at automate-it.com  Tue Nov  8 20:30:27 2022
From: lee at automate-it.com (lee at automate-it.com)
Date: Tue, 08 Nov 2022 21:30:27 -0600
Subject: [TR] 1976 TR6 alternator
In-Reply-To: <692174819.1038877.1667837337562@mail.yahoo.com>
References: <692174819.1038877.1667837337562.ref@mail.yahoo.com>
 <692174819.1038877.1667837337562@mail.yahoo.com>
Message-ID: <a991fa4e00abc378a1a7f288920d2075@automate-it.com>

My local O'Reilly Auto lists this one - and even says it fits my TR6...

https://www.oreillyauto.com/detail/c/ultima/charging---starting/alternator/f7cab2ae3cc0/ultima-43-amp-alternator-remanufactured/ost0/r111251a/v/a/17300/automotive-car-1974-triumph-tr6?q=alternator&pos=0

Named an "Ultima" brand - note that the plastic cover actually says 
"Lucas".

  Lee

On 2022-11-07 10:08, davgil at aol.com wrote:

> Good morning,
> I seem to recall that someone on this list had an alternate for the 
> 1976 TR6 43 amp alternator.  Needed to ask for an earlier Ford or 
> something similar.  Does anyone know of a cross reference to the basic 
> alternator?  Thanks,
> David Gill
> 1976 TR6
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  
> http://www.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/lee at automate-it.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221108/bacb123b/attachment.htm>

From aribertn at gmail.com  Wed Nov  9 21:13:26 2022
From: aribertn at gmail.com (aribert neumann)
Date: Wed, 9 Nov 2022 23:13:26 -0500
Subject: [TR] OT - Houston self serve salvage yards?
Message-ID: <CAGkVM28WwXQBJJDebEvGxtN8d161CBrDuiCmNZZGijoHqUm5+Q@mail.gmail.com>

This is off topic but since people are scattered about the country I
figured I would ask here. I am looking for self serve salvage yards (Pick a
Part kind of places) in Houston - early/mid '90s vintage vehicles,
primarily for Isuzu but also some others. Preferably toward the west side,
I'll be coming in from the far westside. I'll be in the Houston area for a
couple of weeks (mother's 90th birthday) and I figured I could look for a
few parts. I have been poking around on the web a bit but can't get a good
feel of which ones I should try to visit (and conversely to avoid, and it
appears that many do not have a web presence). One of the ones I plan to go
to is Houston Auto recyclers on West Mt Houston. Open for suggestions for
other places - TIA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221109/b122d27e/attachment.htm>

From frogeye at porterscustom.com  Fri Nov 11 09:32:44 2022
From: frogeye at porterscustom.com (David P)
Date: Fri, 11 Nov 2022 09:32:44 -0700
Subject: [TR] Engel Imports Friday Specials
In-Reply-To: <CH0PR20MB4074E9E582E20A84681532D7DD009@CH0PR20MB4074.namprd20.prod.outlook.com>
References: <CH0PR20MB4074E9E582E20A84681532D7DD009@CH0PR20MB4074.namprd20.prod.outlook.com>
Message-ID: <324b9439-aeee-6288-a104-774469c4ea37@porterscustom.com>

NFI..



-------- Forwarded Message --------
Subject: 	
Date: 	
From: 	Diana Fisher <diana at engelimports.com>



800-581-8188 have a great weekend.

NOTICE: This communication may contain confidential information intended 
for the named recipient(s) only. If you received this by mistake, please 
destroy it and notify us of the error. Thank you.

NOTICE: This communication may contain confidential information intended 
for the named recipient(s) only. If you received this by mistake, please 
destroy it and notify us of the error. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221111/3285e4ab/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 332872 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221111/3285e4ab/attachment.png>

From dave at ranteer.com  Fri Nov 11 10:09:43 2022
From: dave at ranteer.com (dave northrup)
Date: Fri, 11 Nov 2022 17:09:43 +0000
Subject: [TR] Engel Imports Friday Specials
In-Reply-To: <324b9439-aeee-6288-a104-774469c4ea37@porterscustom.com>
References: <CH0PR20MB4074E9E582E20A84681532D7DD009@CH0PR20MB4074.namprd20.prod.outlook.com>,
 <324b9439-aeee-6288-a104-774469c4ea37@porterscustom.com>
Message-ID: <6762efe21c8c4986810ee9c16ec2ae0a@ranteer.com>

STOP FORWARDING THESE


-------- Original message --------
From: David P <frogeye at porterscustom.com>
Date: 11/11/22 10:57 AM (GMT-06:00)
To: "Triumphs (triumphs at autox.team.net)" <triumphs at autox.team.net>
Subject: [TR] Engel Imports Friday Specials


NFI..


-------- Forwarded Message --------
Subject:

Date:

From:   Diana Fisher <diana at engelimports.com><mailto:diana at engelimports.com>


800-581-8188 have a great weekend.


[cid:part1.737GyHQZ.eh2z20Zu at porterscustom.com]
NOTICE: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you.
NOTICE: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221111/081a9f48/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 332872 bytes
Desc: image003.png
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221111/081a9f48/attachment.png>

From forzion7 at gmail.com  Fri Nov 11 10:17:17 2022
From: forzion7 at gmail.com (David Friedlander)
Date: Fri, 11 Nov 2022 12:17:17 -0500
Subject: [TR] Engel Imports Friday Specials
In-Reply-To: <6762efe21c8c4986810ee9c16ec2ae0a@ranteer.com>
References: <CH0PR20MB4074E9E582E20A84681532D7DD009@CH0PR20MB4074.namprd20.prod.outlook.com>
 <324b9439-aeee-6288-a104-774469c4ea37@porterscustom.com>
 <6762efe21c8c4986810ee9c16ec2ae0a@ranteer.com>
Message-ID: <CAJ1eQwj6ogi7Lu1=+PK4EhNazTsESe9P86-oC1wa=sjJ-fVS+w@mail.gmail.com>

I don?t mind them, as infrequent as they are. I find them helpful.


On Fri, Nov 11, 2022 at 12:15 PM dave northrup <dave at ranteer.com> wrote:

> STOP FORWARDING THESE
>
>
> -------- Original message --------
> From: David P <frogeye at porterscustom.com>
> Date: 11/11/22 10:57 AM (GMT-06:00)
> To: "Triumphs (triumphs at autox.team.net)" <triumphs at autox.team.net>
> Subject: [TR] Engel Imports Friday Specials
>
> NFI..
>
>
> -------- Forwarded Message --------
> Subject:
> Date:
> From: Diana Fisher <diana at engelimports.com> <diana at engelimports.com>
>
> 800-581-8188 have a great weekend.
>
>
>
>
>
> NOTICE: This communication may contain confidential information intended
> for the named recipient(s) only. If you received this by mistake, please
> destroy it and notify us of the error. Thank you.
> NOTICE: This communication may contain confidential information intended
> for the named recipient(s) only. If you received this by mistake, please
> destroy it and notify us of the error. Thank you.
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/forzion7 at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221111/48bb4324/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 332872 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221111/48bb4324/attachment.png>

From mark at bradakis.com  Wed Nov 16 10:31:07 2022
From: mark at bradakis.com (Mark Bradakis)
Date: Wed, 16 Nov 2022 10:31:07 -0700
Subject: [TR] Old badge
Message-ID: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>

Was cleaning up some stuff and found this.? Can't remember exactly when 
it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/6c2bc34e/attachment.jpg>

From ronaldolds53 at gmail.com  Wed Nov 16 11:14:45 2022
From: ronaldolds53 at gmail.com (Ronald Olds)
Date: Wed, 16 Nov 2022 13:14:45 -0500
Subject: [TR] Old badge
In-Reply-To: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
Message-ID: <CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej+Pk_8PvBUjBw@mail.gmail.com>

I just ran across my badge like that last week.

Ron Olds

On Wed, Nov 16, 2022 at 13:01 Mark Bradakis <mark at bradakis.com> wrote:

> Was cleaning up some stuff and found this.  Can't remember exactly when
> it was made, or who was responsible for doing so. Maybe 1995 or so?
>
> mjb.
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ronaldolds53 at gmail.com
>
-- 
Ronald Olds
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/a175a811/attachment.htm>

From mmarr at albiontechnical.com  Wed Nov 16 11:27:43 2022
From: mmarr at albiontechnical.com (Michael Marr)
Date: Wed, 16 Nov 2022 18:27:43 +0000
Subject: [TR] Old badge
In-Reply-To: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
Message-ID: <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>

I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.

Mike

Sent from my iPhone

On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote:

?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

[20221116_064309.jpg]** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: 20221116_064309.jpg
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment.jpg>

From spitlist at cox.net  Wed Nov 16 12:18:31 2022
From: spitlist at cox.net (JOE CURRY)
Date: Wed, 16 Nov 2022 14:18:31 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
Message-ID: <1036523371.1109590.1668626311442@myemail.cox.net>

That would be me.  I did one for the Triumphs group as well as the Spitfires one.

Joe

> On November 16, 2022 at 12:31 PM Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com > wrote:
> 
> 
>     Was cleaning up some stuff and found this.  Can't remember exactly when
>     it was made, or who was responsible for doing so. Maybe 1995 or so?
> 
>     mjb.
> 
>     ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/9f1cb206/attachment.htm>

From spitlist at cox.net  Wed Nov 16 12:22:20 2022
From: spitlist at cox.net (JOE CURRY)
Date: Wed, 16 Nov 2022 14:22:20 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
Message-ID: <194382948.1109738.1668626540269@myemail.cox.net>

That would be a definite NO!  I even sold the ones I kept for myself due to demand and the fact that the company I used to make them has changed hands.

Joe

> On November 16, 2022 at 1:27 PM Michael Marr <mmarr at albiontechnical.com> wrote:
> 
>     I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left. 
> 
>     Mike
> 
>     Sent from my iPhone
> 
> 
>         > > On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote:
> > 
> > 
> >     > 
>         > >         Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > 
> >         mjb.
> > 
> >         [20221116_064309.jpg]** triumphs at autox.team.net **
> > 
> >         Donate: http://www.team.net/donate.html
> >         Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> > 
> >         Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
> > 
> >     > 




> ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/aeb37f5d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/aeb37f5d/attachment.jpg>

From notakitcar at yahoo.com  Wed Nov 16 13:01:01 2022
From: notakitcar at yahoo.com (bill beecher)
Date: Wed, 16 Nov 2022 14:01:01 -0600
Subject: [TR] Old badge
In-Reply-To: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
Message-ID: <2BBF97A9-5260-46B9-9799-E84184E27EE6@yahoo.com>

Yes, I have one too?.somewhere.  Not sure of when they were made but I would have bought mine sometime after 2006. 
Bill B
TS30800L

?Do your best, and let the sparrows twitter?  Lofty

On Nov 16, 2022, at 11:53 AM, Mark Bradakis <mark at bradakis.com> wrote:

?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

<20221116_064309.jpg>
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar at yahoo.com


From keithstewart at bell.net  Wed Nov 16 13:53:56 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Wed, 16 Nov 2022 15:53:56 -0500
Subject: [TR] Old badge
In-Reply-To: <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
Message-ID: <04f701d8f9fd$8b333260$a1999720$@bell.net>

I think part of that same offering by Joe was the anti-static cling windshield sticker ? I have several of those for the Triumph List and for the Spitfire List. I think he may also have made regular stickers for both of those as well

 

Keith

 

From: Michael Marr <mmarr at albiontechnical.com> 
Sent: November 16, 2022 1:28 PM
To: Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

 

I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.  

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/fe6e7d3c/attachment.htm>

From trguy75 at gmail.com  Wed Nov 16 15:10:55 2022
From: trguy75 at gmail.com (Jim Henningsen)
Date: Wed, 16 Nov 2022 17:10:55 -0500
Subject: [TR] Old badge
In-Reply-To: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
Message-ID: <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>

I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 

> On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
> 
> ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> 
> mjb.
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/1a5c435e/attachment.jpg>
-------------- next part --------------
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75 at gmail.com

From grandfatherjim at gmail.com  Wed Nov 16 15:42:14 2022
From: grandfatherjim at gmail.com (Jim Wallace)
Date: Wed, 16 Nov 2022 17:42:14 -0500
Subject: [TR] Triumphs Digest, Vol 15, Issue 191
In-Reply-To: <mailman.9.1668625202.4057.triumphs@autox.team.net>
References: <mailman.9.1668625202.4057.triumphs@autox.team.net>
Message-ID: <CAA43NTuvA_+yjqxJKLNt0911A-usJPQuwyHbvG5hZeZ4LZsnGw@mail.gmail.com>

would have been 97 or after, as I joined then and remember when they were
made available, by a Mr. Fluif I believe.
JW
=====================
Subject: [TR] Old badge

Was cleaning up some stuff and found this.? Can't remember exactly when
it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

On Wed, 16 Nov 2022 at 15:26, <triumphs-request at autox.team.net> wrote:

> Send Triumphs mailing list submissions to
>         triumphs at autox.team.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://autox.team.net/mailman/listinfo/triumphs
> or, via email, send a message with subject or body 'help' to
>         triumphs-request at autox.team.net
>
> You can reach the person managing the list at
>         triumphs-owner at autox.team.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Triumphs digest..."
>
>
> Today's Topics:
>
>    1. Old badge (Mark Bradakis)
>    2. Re: Old badge (Ronald Olds)
>    3. Re: Old badge (Michael Marr)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 16 Nov 2022 10:31:07 -0700
> From: Mark Bradakis <mark at bradakis.com>
> To: triumphs at autox.team.net
> Subject: [TR] Old badge
> Message-ID: <a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> Was cleaning up some stuff and found this.? Can't remember exactly when
> it was made, or who was responsible for doing so. Maybe 1995 or so?
>
> mjb.
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 20221116_064309.jpg
> Type: image/jpeg
> Size: 310657 bytes
> Desc: not available
> URL: <
> http://autox.team.net/pipermail/triumphs/attachments/20221116/6c2bc34e/attachment-0001.jpg
> >
>
> ------------------------------
>
> Message: 2
> Date: Wed, 16 Nov 2022 13:14:45 -0500
> From: Ronald Olds <ronaldolds53 at gmail.com>
> To: Mark Bradakis <mark at bradakis.com>
> Cc: triumphs at autox.team.net
> Subject: Re: [TR] Old badge
> Message-ID:
>         <
> CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej+Pk_8PvBUjBw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> I just ran across my badge like that last week.
>
> Ron Olds
>
> On Wed, Nov 16, 2022 at 13:01 Mark Bradakis <mark at bradakis.com> wrote:
>
> > Was cleaning up some stuff and found this.  Can't remember exactly when
> > it was made, or who was responsible for doing so. Maybe 1995 or so?
> >
> > mjb.
> >
> > ** triumphs at autox.team.net **
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/triumphs
> > http://www.team.net/archive
> >
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/triumphs/ronaldolds53 at gmail.com
> >
> --
> Ronald Olds
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://autox.team.net/pipermail/triumphs/attachments/20221116/a175a811/attachment-0001.htm
> >
>
> ------------------------------
>
> Message: 3
> Date: Wed, 16 Nov 2022 18:27:43 +0000
> From: Michael Marr <mmarr at albiontechnical.com>
> To: Mark Bradakis <mark at bradakis.com>
> Cc: "triumphs at autox.team.net" <triumphs at autox.team.net>
> Subject: Re: [TR] Old badge
> Message-ID: <46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com>
> Content-Type: text/plain; charset="utf-8"
>
> I still have two of those. It was made by the master craftsman Joe Curry.
> He may even have some left.
>
> Mike
>
> Sent from my iPhone
>
> On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote:
>
> ?Was cleaning up some stuff and found this.  Can't remember exactly when
> it was made, or who was responsible for doing so. Maybe 1995 or so?
>
> mjb.
>
> [20221116_064309.jpg]** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.htm
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 20221116_064309.jpg
> Type: image/jpeg
> Size: 310657 bytes
> Desc: 20221116_064309.jpg
> URL: <
> http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.jpg
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
>
> Triumphs mailing list
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> ------------------------------
>
> End of Triumphs Digest, Vol 15, Issue 191
> *****************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/87f6894f/attachment.htm>

From spitlist at cox.net  Wed Nov 16 16:25:31 2022
From: spitlist at cox.net (JOE CURRY)
Date: Wed, 16 Nov 2022 18:25:31 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <04f701d8f9fd$8b333260$a1999720$@bell.net>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
 <04f701d8f9fd$8b333260$a1999720$@bell.net>
Message-ID: <1428831389.1114373.1668641131121@myemail.cox.net>

I have 15 stickyback Triumphs list decals and 1 Spitfires list one left from the earlier production.  I sold out of the static cling ones (for the inside of glass), but if there is a demand, I can print more.  They are $2.00 each for the ones in stock.  Because of the increase in materials since the earlier production, new ones will cost $4.00 each.  Postage is free to anywhere inside the USA,  International orders add one Dollar.

Joe 

> On November 16, 2022 at 3:53 PM keithstewart at bell.net wrote:
> 
> 
>     I think part of that same offering by Joe was the anti-static cling windshield sticker ? I have several of those for the Triumph List and for the Spitfire List. I think he may also have made regular stickers for both of those as well
> 
>      
> 
>     Keith
> 
>      
> 
>     From: Michael Marr <mmarr at albiontechnical.com>
>     Sent: November 16, 2022 1:28 PM
>     To: Mark Bradakis <mark at bradakis.com>
>     Cc: triumphs at autox.team.net
>     Subject: Re: [TR] Old badge
> 
>      
> 
>     I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left. 
> 
>      
> 
>         > > 
> >          
> > 
> >     > 




> ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/377c51c0/attachment.htm>

From spitlist at cox.net  Wed Nov 16 16:27:59 2022
From: spitlist at cox.net (JOE CURRY)
Date: Wed, 16 Nov 2022 18:27:59 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <2BBF97A9-5260-46B9-9799-E84184E27EE6@yahoo.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <2BBF97A9-5260-46B9-9799-E84184E27EE6@yahoo.com>
Message-ID: <839823459.1114433.1668641279545@myemail.cox.net>

That is around the time I produced them.  I presold them due to the expense and only produced enough to fill orders with a few left over to cover add-on demand.
Joe

> On November 16, 2022 at 3:01 PM bill beecher <notakitcar at yahoo.com> wrote:
> 
> 
> Yes, I have one too?.somewhere.  Not sure of when they were made but I would have bought mine sometime after 2006. 
> Bill B
> TS30800L
> 
> ?Do your best, and let the sparrows twitter?  Lofty
> 
> On Nov 16, 2022, at 11:53 AM, Mark Bradakis <mark at bradakis.com> wrote:
> 
> ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> 
> mjb.
> 
> <20221116_064309.jpg>
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar at yahoo.com
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net

From dave1massey at cs.com  Thu Nov 17 05:49:19 2022
From: dave1massey at cs.com (DAVID MASSEY)
Date: Thu, 17 Nov 2022 12:49:19 +0000 (UTC)
Subject: [TR] Old badge
In-Reply-To: <194382948.1109738.1668626540269@myemail.cox.net>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
 <194382948.1109738.1668626540269@myemail.cox.net>
Message-ID: <2024893282.1492247.1668689359725@mail.yahoo.com>

 Ooooo.? Does that mean I can sell the three I have for big $$$ ?
;-)
 
Dave 


 
 
-----Original Message-----
From: JOE CURRY <spitlist at cox.net>
To: Michael Marr <mmarr at albiontechnical.com>; Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Sent: Wed, Nov 16, 2022 1:22 pm
Subject: Re: [TR] Old badge

 That would be a definite NO!? I even sold the ones I kept for myself due to demand and the fact that the company I used to make them has changed hands. Joe 
 On November 16, 2022 at 1:27 PM Michael Marr <mmarr at albiontechnical.com> wrote: 
 
 I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.?  
   Mike 
 
  Sent from my iPhone   
 
 On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote: 
 
 
  
  Was cleaning up some stuff and found this.? Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so? 
 
 mjb. 
 
 ** triumphs at autox.team.net ** 
 
 Donate: http://www.team.net/donate.html 
 Archive: http://www.team.net/pipermail/triumphs ?http://www.team.net/archive 
 
 Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com 
  
  
 
? 
 ** triumphs at autox.team.net ** 
 
Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive 
 
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net 
 
 
? ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/49b438a7/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/49b438a7/attachment.jpg>

From dave1massey at cs.com  Thu Nov 17 05:58:24 2022
From: dave1massey at cs.com (DAVID MASSEY)
Date: Thu, 17 Nov 2022 12:58:24 +0000 (UTC)
Subject: [TR] Triumphs Digest, Vol 15, Issue 191
In-Reply-To: <CAA43NTuvA_+yjqxJKLNt0911A-usJPQuwyHbvG5hZeZ4LZsnGw@mail.gmail.com>
References: <mailman.9.1668625202.4057.triumphs@autox.team.net>
 <CAA43NTuvA_+yjqxJKLNt0911A-usJPQuwyHbvG5hZeZ4LZsnGw@mail.gmail.com>
Message-ID: <1892599313.1487230.1668689904139@mail.yahoo.com>

 

 Mr. Fluif
The typo that won't die...
Oh, well, I guess it's better than being ignored.

Or forgotten.

Dave 


 
 
-----Original Message-----
From: Jim Wallace <grandfatherjim at gmail.com>
To: triumphs at autox.team.net
Sent: Wed, Nov 16, 2022 4:42 pm
Subject: Re: [TR] Triumphs Digest, Vol 15, Issue 191

would have been 97 or after, as I joined then and remember when they were made available, by a Mr. Fluif I believe.JW
=====================
Subject: [TR] Old badge
Was cleaning up some stuff and found this.? Can't remember exactly when 
it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.
On Wed, 16 Nov 2022 at 15:26, <triumphs-request at autox.team.net> wrote:

Send Triumphs mailing list submissions to
? ? ? ? triumphs at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
? ? ? ? http://autox.team.net/mailman/listinfo/triumphs
or, via email, send a message with subject or body 'help' to
? ? ? ? triumphs-request at autox.team.net

You can reach the person managing the list at
? ? ? ? triumphs-owner at autox.team.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Triumphs digest..."


Today's Topics:

? ?1. Old badge (Mark Bradakis)
? ?2. Re: Old badge (Ronald Olds)
? ?3. Re: Old badge (Michael Marr)


----------------------------------------------------------------------

Message: 1
Date: Wed, 16 Nov 2022 10:31:07 -0700
From: Mark Bradakis <mark at bradakis.com>
To: triumphs at autox.team.net
Subject: [TR] Old badge
Message-ID: <a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Was cleaning up some stuff and found this.? Can't remember exactly when 
it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/6c2bc34e/attachment-0001.jpg>

------------------------------

Message: 2
Date: Wed, 16 Nov 2022 13:14:45 -0500
From: Ronald Olds <ronaldolds53 at gmail.com>
To: Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge
Message-ID:
? ? ? ? <CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej+Pk_8PvBUjBw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

I just ran across my badge like that last week.

Ron Olds

On Wed, Nov 16, 2022 at 13:01 Mark Bradakis <mark at bradakis.com> wrote:

> Was cleaning up some stuff and found this.? Can't remember exactly when
> it was made, or who was responsible for doing so. Maybe 1995 or so?
>
> mjb.
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ronaldolds53 at gmail.com
>
-- 
Ronald Olds
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/a175a811/attachment-0001.htm>

------------------------------

Message: 3
Date: Wed, 16 Nov 2022 18:27:43 +0000
From: Michael Marr <mmarr at albiontechnical.com>
To: Mark Bradakis <mark at bradakis.com>
Cc: "triumphs at autox.team.net" <triumphs at autox.team.net>
Subject: Re: [TR] Old badge
Message-ID: <46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com>
Content-Type: text/plain; charset="utf-8"

I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.

Mike

Sent from my iPhone

On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote:

?Was cleaning up some stuff and found this.? Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

[20221116_064309.jpg]** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs? http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: 20221116_064309.jpg
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.jpg>

------------------------------

Subject: Digest Footer

_______________________________________________

Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


------------------------------

End of Triumphs Digest, Vol 15, Issue 191
*****************************************

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/254a68d2/attachment.htm>

From spitlist at cox.net  Thu Nov 17 07:22:45 2022
From: spitlist at cox.net (JOE CURRY)
Date: Thu, 17 Nov 2022 09:22:45 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <2024893282.1492247.1668689359725@mail.yahoo.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
 <194382948.1109738.1668626540269@myemail.cox.net>
 <2024893282.1492247.1668689359725@mail.yahoo.com>
Message-ID: <1287837055.1077584.1668694965231@myemail.cox.net>

Yes (if two dollars is "Big Bucks" in todays inflated economy).

Joe

> On November 17, 2022 at 7:49 AM DAVID MASSEY <dave1massey at cs.com> wrote:
> 
>     Ooooo.  Does that mean I can sell the three I have for big $$$ ?
> 
>     ;-)
> 
>     Dave
> 
> 
> 
> 
>     -----Original Message-----
>     From: JOE CURRY <spitlist at cox.net>
>     To: Michael Marr <mmarr at albiontechnical.com>; Mark Bradakis <mark at bradakis.com>
>     Cc: triumphs at autox.team.net
>     Sent: Wed, Nov 16, 2022 1:22 pm
>     Subject: Re: [TR] Old badge
> 
>     That would be a definite NO!  I even sold the ones I kept for myself due to demand and the fact that the company I used to make them has changed hands.
>     Joe
> 
>         > > On November 16, 2022 at 1:27 PM Michael Marr <mmarr at albiontechnical.com> wrote:
> > 
> > 
> >         I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left. 
> > 
> >         Mike
> > 
> >         Sent from my iPhone
> > 
> > 
> >             > > > On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote:
> > > 
> > > 
> > >         > > 
> >             > > >             Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > > 
> > >             mjb.
> > > 
> > >             [20221116_064309.jpg]** triumphs at autox.team.net **
> > > 
> > >             Donate: http://www.team.net/donate.html
> > >             Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> > > 
> > >             Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
> > > 
> > >         > > 
> >     > 
>      
> 
>         > >         ** triumphs at autox.team.net **
> > 
> >         Donate: http://www.team.net/donate.html
> >         Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> > 
> > 
> >         Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> > 
> > 
> >     > 
>      
>     ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/0ed1f8ed/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/0ed1f8ed/attachment.jpg>

From spitlist at cox.net  Thu Nov 17 07:25:00 2022
From: spitlist at cox.net (JOE CURRY)
Date: Thu, 17 Nov 2022 09:25:00 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
Message-ID: <1283407220.1077610.1668695100804@myemail.cox.net>

At $35.00 each, I doubt it was the metal ones Fred was giving out.  It may have been the stickers.


Joe

> On November 16, 2022 at 5:10 PM Jim Henningsen <trguy75 at gmail.com mailto:trguy75 at gmail.com > wrote:
> 
> 
>     I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004? Joe Curry, does that timeframe ring a bell or was it another pin or date. Rest In Peace Fred. I miss you. Jim Henningsen
> 
>         > > On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com > wrote:
> > 
> >         Was cleaning up some stuff and found this. Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > 
> >         mjb.
> > 
> >         ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> > 
> >         Donate: http://www.team.net/donate.html
> >         Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> > 
> >         Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75 at gmail.com
> > 
> >     > ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/7f54a1ab/attachment.htm>

From spitlist at cox.net  Thu Nov 17 07:26:49 2022
From: spitlist at cox.net (JOE CURRY)
Date: Thu, 17 Nov 2022 09:26:49 -0500 (EST)
Subject: [TR] Triumphs Digest, Vol 15, Issue 191
In-Reply-To: <1892599313.1487230.1668689904139@mail.yahoo.com>
References: <mailman.9.1668625202.4057.triumphs@autox.team.net>
 <CAA43NTuvA_+yjqxJKLNt0911A-usJPQuwyHbvG5hZeZ4LZsnGw@mail.gmail.com>
 <1892599313.1487230.1668689904139@mail.yahoo.com>
Message-ID: <1597100437.1077663.1668695210460@myemail.cox.net>

Nope!  This is why I have decided to be cremated.  No tombstone to have the word Fluif on.


Joe.

> On November 17, 2022 at 7:58 AM DAVID MASSEY <dave1massey at cs.com> wrote:
> 
> 
> 
>         > > Mr. Fluif
> > 
> >     >     The typo that won't die...
> 
>     Oh, well, I guess it's better than being ignored.
> 
>     Or forgotten.
> 
>     Dave
> 
> 
> 
> 
>     -----Original Message-----
>     From: Jim Wallace <grandfatherjim at gmail.com>
>     To: triumphs at autox.team.net
>     Sent: Wed, Nov 16, 2022 4:42 pm
>     Subject: Re: [TR] Triumphs Digest, Vol 15, Issue 191
> 
>     would have been 97 or after, as I joined then and remember when they were made available, by a Mr. Fluif I believe.
>     JW
>     =====================
>     Subject: [TR] Old badge
> 
>     Was cleaning up some stuff and found this.? Can't remember exactly when
>     it was made, or who was responsible for doing so. Maybe 1995 or so?
> 
>     mjb.
> 
>     On Wed, 16 Nov 2022 at 15:26, <triumphs-request at autox.team.net mailto:triumphs-request at autox.team.net > wrote:
> 
>         > > Send Triumphs mailing list submissions to
> >                 triumphs at autox.team.net mailto:triumphs at autox.team.net
> > 
> >         To subscribe or unsubscribe via the World Wide Web, visit
> >                 http://autox.team.net/mailman/listinfo/triumphs
> >         or, via email, send a message with subject or body 'help' to
> >                 triumphs-request at autox.team.net mailto:triumphs-request at autox.team.net
> > 
> >         You can reach the person managing the list at
> >                 triumphs-owner at autox.team.net mailto:triumphs-owner at autox.team.net
> > 
> >         When replying, please edit your Subject line so it is more specific
> >         than "Re: Contents of Triumphs digest..."
> > 
> > 
> >         Today's Topics:
> > 
> >            1. Old badge (Mark Bradakis)
> >            2. Re: Old badge (Ronald Olds)
> >            3. Re: Old badge (Michael Marr)
> > 
> > 
> >         ----------------------------------------------------------------------
> > 
> >         Message: 1
> >         Date: Wed, 16 Nov 2022 10:31:07 -0700
> >         From: Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com >
> >         To: triumphs at autox.team.net mailto:triumphs at autox.team.net
> >         Subject: [TR] Old badge
> >         Message-ID: <a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com mailto:a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com >
> >         Content-Type: text/plain; charset="utf-8"; Format="flowed"
> > 
> >         Was cleaning up some stuff and found this.? Can't remember exactly when
> >         it was made, or who was responsible for doing so. Maybe 1995 or so?
> > 
> >         mjb.
> > 
> >         -------------- next part --------------
> >         A non-text attachment was scrubbed...
> >         Name: 20221116_064309.jpg
> >         Type: image/jpeg
> >         Size: 310657 bytes
> >         Desc: not available
> >         URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/6c2bc34e/attachment-0001.jpg>
> > 
> >         ------------------------------
> > 
> >         Message: 2
> >         Date: Wed, 16 Nov 2022 13:14:45 -0500
> >         From: Ronald Olds <ronaldolds53 at gmail.com mailto:ronaldolds53 at gmail.com >
> >         To: Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com >
> >         Cc: triumphs at autox.team.net mailto:triumphs at autox.team.net
> >         Subject: Re: [TR] Old badge
> >         Message-ID:
> >                 <CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej+Pk_8PvBUjBw at mail.gmail.com mailto:CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej%2BPk_8PvBUjBw at mail.gmail.com >
> >         Content-Type: text/plain; charset="utf-8"
> > 
> >         I just ran across my badge like that last week.
> > 
> >         Ron Olds
> > 
> >         On Wed, Nov 16, 2022 at 13:01 Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com > wrote:
> > 
> >         > Was cleaning up some stuff and found this.  Can't remember exactly when
> >         > it was made, or who was responsible for doing so. Maybe 1995 or so?
> >         >
> >         > mjb.
> >         >
> >         > ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> >         >
> >         > Donate: http://www.team.net/donate.html
> >         > Archive: http://www.team.net/pipermail/triumphs
> >         > http://www.team.net/archive
> >         >
> >         > Unsubscribe/Manage:
> >         > http://autox.team.net/mailman/options/triumphs/ronaldolds53 at gmail.com
> >         >
> >         --
> >         Ronald Olds
> >         -------------- next part --------------
> >         An HTML attachment was scrubbed...
> >         URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/a175a811/attachment-0001.htm>
> > 
> >         ------------------------------
> > 
> >         Message: 3
> >         Date: Wed, 16 Nov 2022 18:27:43 +0000
> >         From: Michael Marr <mmarr at albiontechnical.com mailto:mmarr at albiontechnical.com >
> >         To: Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com >
> >         Cc: "triumphs at autox.team.net mailto:triumphs at autox.team.net " <triumphs at autox.team.net mailto:triumphs at autox.team.net >
> >         Subject: Re: [TR] Old badge
> >         Message-ID: <46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com mailto:46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com >
> >         Content-Type: text/plain; charset="utf-8"
> > 
> >         I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.
> > 
> >         Mike
> > 
> >         Sent from my iPhone
> > 
> >         On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com mailto:mark at bradakis.com > wrote:
> > 
> >         ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > 
> >         mjb.
> > 
> >         [20221116_064309.jpg]** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> > 
> >         Donate: http://www.team.net/donate.html
> >         Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> > 
> >         Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
> >         -------------- next part --------------
> >         An HTML attachment was scrubbed...
> >         URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.htm>
> >         -------------- next part --------------
> >         A non-text attachment was scrubbed...
> >         Name: 20221116_064309.jpg
> >         Type: image/jpeg
> >         Size: 310657 bytes
> >         Desc: 20221116_064309.jpg
> >         URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.jpg>
> > 
> >         ------------------------------
> > 
> >         Subject: Digest Footer
> > 
> >         _______________________________________________
> > 
> >         Triumphs mailing list
> >         Triumphs at autox.team.net mailto:Triumphs at autox.team.net
> >         http://autox.team.net/mailman/listinfo/triumphs
> > 
> > 
> >         ------------------------------
> > 
> >         End of Triumphs Digest, Vol 15, Issue 191
> >         *****************************************
> > 
> >     >     ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com
>     ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/6ce6a28d/attachment.htm>

From mmarr at albiontechnical.com  Thu Nov 17 13:55:22 2022
From: mmarr at albiontechnical.com (Michael Marr)
Date: Thu, 17 Nov 2022 20:55:22 +0000
Subject: [TR] Triumphs Digest, Vol 15, Issue 191
In-Reply-To: <1597100437.1077663.1668695210460@myemail.cox.net>
References: <mailman.9.1668625202.4057.triumphs@autox.team.net>
 <CAA43NTuvA_+yjqxJKLNt0911A-usJPQuwyHbvG5hZeZ4LZsnGw@mail.gmail.com>
 <1892599313.1487230.1668689904139@mail.yahoo.com>
 <1597100437.1077663.1668695210460@myemail.cox.net>
Message-ID: <DM8PR11MB5575354162EB3BE7B21C2F1EA0069@DM8PR11MB5575.namprd11.prod.outlook.com>

I?m sure Gof will forgive you, Joe?

Mike

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of JOE CURRY
Sent: Thursday, November 17, 2022 8:27 AM
To: DAVID MASSEY <dave1massey at cs.com>; grandfatherjim at gmail.com; triumphs at autox.team.net
Subject: Re: [TR] Triumphs Digest, Vol 15, Issue 191


Nope!  This is why I have decided to be cremated.  No tombstone to have the word Fluif on.



Joe.
On November 17, 2022 at 7:58 AM DAVID MASSEY <dave1massey at cs.com<mailto:dave1massey at cs.com>> wrote:

Mr. Fluif
The typo that won't die...

Oh, well, I guess it's better than being ignored.

Or forgotten.

Dave




-----Original Message-----
From: Jim Wallace <grandfatherjim at gmail.com<mailto:grandfatherjim at gmail.com>>
To: triumphs at autox.team.net<mailto:triumphs at autox.team.net>
Sent: Wed, Nov 16, 2022 4:42 pm
Subject: Re: [TR] Triumphs Digest, Vol 15, Issue 191
would have been 97 or after, as I joined then and remember when they were made available, by a Mr. Fluif I believe.
JW
=====================
Subject: [TR] Old badge

Was cleaning up some stuff and found this.? Can't remember exactly when
it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

On Wed, 16 Nov 2022 at 15:26, <triumphs-request at autox.team.net<mailto:triumphs-request at autox.team.net>> wrote:
Send Triumphs mailing list submissions to
        triumphs at autox.team.net<mailto:triumphs at autox.team.net>

To subscribe or unsubscribe via the World Wide Web, visit
        http://autox.team.net/mailman/listinfo/triumphs
or, via email, send a message with subject or body 'help' to
        triumphs-request at autox.team.net<mailto:triumphs-request at autox.team.net>

You can reach the person managing the list at
        triumphs-owner at autox.team.net<mailto:triumphs-owner at autox.team.net>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Triumphs digest..."


Today's Topics:

   1. Old badge (Mark Bradakis)
   2. Re: Old badge (Ronald Olds)
   3. Re: Old badge (Michael Marr)


----------------------------------------------------------------------

Message: 1
Date: Wed, 16 Nov 2022 10:31:07 -0700
From: Mark Bradakis <mark at bradakis.com<mailto:mark at bradakis.com>>
To: triumphs at autox.team.net<mailto:triumphs at autox.team.net>
Subject: [TR] Old badge
Message-ID: <a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com<mailto:a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com>>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Was cleaning up some stuff and found this.? Can't remember exactly when
it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/6c2bc34e/attachment-0001.jpg>

------------------------------

Message: 2
Date: Wed, 16 Nov 2022 13:14:45 -0500
From: Ronald Olds <ronaldolds53 at gmail.com<mailto:ronaldolds53 at gmail.com>>
To: Mark Bradakis <mark at bradakis.com<mailto:mark at bradakis.com>>
Cc: triumphs at autox.team.net<mailto:triumphs at autox.team.net>
Subject: Re: [TR] Old badge
Message-ID:
        <CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej+Pk_8PvBUjBw at mail.gmail.com<mailto:CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej%2BPk_8PvBUjBw at mail.gmail.com>>
Content-Type: text/plain; charset="utf-8"

I just ran across my badge like that last week.

Ron Olds

On Wed, Nov 16, 2022 at 13:01 Mark Bradakis <mark at bradakis.com<mailto:mark at bradakis.com>> wrote:

> Was cleaning up some stuff and found this.  Can't remember exactly when
> it was made, or who was responsible for doing so. Maybe 1995 or so?
>
> mjb.
>
> ** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ronaldolds53 at gmail.com
>
--
Ronald Olds
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/a175a811/attachment-0001.htm>

------------------------------

Message: 3
Date: Wed, 16 Nov 2022 18:27:43 +0000
From: Michael Marr <mmarr at albiontechnical.com<mailto:mmarr at albiontechnical.com>>
To: Mark Bradakis <mark at bradakis.com<mailto:mark at bradakis.com>>
Cc: "triumphs at autox.team.net<mailto:triumphs at autox.team.net>" <triumphs at autox.team.net<mailto:triumphs at autox.team.net>>
Subject: Re: [TR] Old badge
Message-ID: <46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com<mailto:46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com>>
Content-Type: text/plain; charset="utf-8"

I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.

Mike

Sent from my iPhone

On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com<mailto:mark at bradakis.com>> wrote:

?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb.

[20221116_064309.jpg]** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221116_064309.jpg
Type: image/jpeg
Size: 310657 bytes
Desc: 20221116_064309.jpg
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.jpg>

------------------------------

Subject: Digest Footer

_______________________________________________

Triumphs mailing list
Triumphs at autox.team.net<mailto:Triumphs at autox.team.net>
http://autox.team.net/mailman/listinfo/triumphs


------------------------------

End of Triumphs Digest, Vol 15, Issue 191
*****************************************
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/04c1a89c/attachment.htm>

From dave1massey at cs.com  Thu Nov 17 14:46:16 2022
From: dave1massey at cs.com (DAVID MASSEY)
Date: Thu, 17 Nov 2022 21:46:16 +0000 (UTC)
Subject: [TR] Triumphs Digest, Vol 15, Issue 191
In-Reply-To: <DM8PR11MB5575354162EB3BE7B21C2F1EA0069@DM8PR11MB5575.namprd11.prod.outlook.com>
References: <mailman.9.1668625202.4057.triumphs@autox.team.net>
 <CAA43NTuvA_+yjqxJKLNt0911A-usJPQuwyHbvG5hZeZ4LZsnGw@mail.gmail.com>
 <1892599313.1487230.1668689904139@mail.yahoo.com>
 <1597100437.1077663.1668695210460@myemail.cox.net>
 <DM8PR11MB5575354162EB3BE7B21C2F1EA0069@DM8PR11MB5575.namprd11.prod.outlook.com>
Message-ID: <1860624398.1773009.1668721576784@mail.yahoo.com>

 Well, dajk!
 
Dave 


 
 
-----Original Message-----
From: Michael Marr <mmarr at albiontechnical.com>
To: JOE CURRY <spitlist at cox.net>; DAVID MASSEY <dave1massey at cs.com>; grandfatherjim at gmail.com <grandfatherjim at gmail.com>; triumphs at autox.team.net <triumphs at autox.team.net>
Sent: Thu, Nov 17, 2022 2:55 pm
Subject: RE: [TR] Triumphs Digest, Vol 15, Issue 191

<!--#yiv4637062773 filtered {}#yiv4637062773 filtered {}#yiv4637062773 p.yiv4637062773MsoNormal, #yiv4637062773 li.yiv4637062773MsoNormal, #yiv4637062773 div.yiv4637062773MsoNormal {margin:0in;font-size:11.0pt;font-family:"Calibri", sans-serif;}#yiv4637062773 a:link, #yiv4637062773 span.yiv4637062773MsoHyperlink {color:blue;text-decoration:underline;}#yiv4637062773 p.yiv4637062773default-style, #yiv4637062773 li.yiv4637062773default-style, #yiv4637062773 div.yiv4637062773default-style {margin-right:0in;margin-left:0in;font-size:11.0pt;font-family:"Calibri", sans-serif;}#yiv4637062773 span.yiv4637062773EmailStyle21 {font-family:"Calibri", sans-serif;color:windowtext;}#yiv4637062773 .yiv4637062773MsoChpDefault {font-size:10.0pt;}#yiv4637062773 filtered {}#yiv4637062773 div.yiv4637062773WordSection1 {}-->I?m sure Gof will forgive you, Joe?  ? Mike  ? From: Triumphs <triumphs-bounces at autox.team.net> On Behalf OfJOE CURRY
Sent: Thursday, November 17, 2022 8:27 AM
To: DAVID MASSEY <dave1massey at cs.com>; grandfatherjim at gmail.com; triumphs at autox.team.net
Subject: Re: [TR] Triumphs Digest, Vol 15, Issue 191  ? Nope!? This is why I have decided to be cremated.? No tombstone to have the word Fluif on.  ? Joe. 
On November 17, 2022 at 7:58 AM DAVID MASSEY <dave1massey at cs.com> wrote:  ? 
Mr. Fluif 
The typo that won't die...  ? Oh, well, I guess it's better than being ignored.  ? Or forgotten.  ? Dave  ?  ?  ?  ? -----Original Message-----
From: Jim Wallace <grandfatherjim at gmail.com>
To: triumphs at autox.team.net
Sent: Wed, Nov 16, 2022 4:42 pm
Subject: Re: [TR] Triumphs Digest, Vol 15, Issue 191 would have been 97 or after, as I joined then and remember when they were made available, by a Mr. Fluif I believe. JW ===================== Subject: [TR] Old badge 
Was cleaning up some stuff and found this.? Can't remember exactly when 
it was made, or who was responsible for doing so. Maybe 1995 or so? 

mjb.   ? On Wed, 16 Nov 2022 at 15:26, <triumphs-request at autox.team.net> wrote: 
Send Triumphs mailing list submissions to
? ? ? ? triumphs at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit 
? ? ? ? http://autox.team.net/mailman/listinfo/triumphs 
or, via email, send a message with subject or body 'help' to 
? ? ? ? triumphs-request at autox.team.net

You can reach the person managing the list at 
? ? ? ? triumphs-owner at autox.team.net

When replying, please edit your Subject line so it is more specific 
than "Re: Contents of Triumphs digest..." 


Today's Topics: 

? ?1. Old badge (Mark Bradakis) 
? ?2. Re: Old badge (Ronald Olds) 
? ?3. Re: Old badge (Michael Marr) 


---------------------------------------------------------------------- 

Message: 1 
Date: Wed, 16 Nov 2022 10:31:07 -0700 
From: Mark Bradakis <mark at bradakis.com>
To: triumphs at autox.team.net
Subject: [TR] Old badge 
Message-ID: <a3eeb7d1-977f-92bf-f090-56f6769be11d at bradakis.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed" 

Was cleaning up some stuff and found this.? Can't remember exactly when 
it was made, or who was responsible for doing so. Maybe 1995 or so? 

mjb. 

-------------- next part -------------- 
A non-text attachment was scrubbed... 
Name: 20221116_064309.jpg 
Type: image/jpeg 
Size: 310657 bytes 
Desc: not available 
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/6c2bc34e/attachment-0001.jpg>

------------------------------ 

Message: 2 
Date: Wed, 16 Nov 2022 13:14:45 -0500 
From: Ronald Olds <ronaldolds53 at gmail.com>
To: Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge 
Message-ID: 
? ? ? ? <CAOqNOT_G2LYwqkY9a-19aR0yON6R8dwc5Aupej+Pk_8PvBUjBw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8" 

I just ran across my badge like that last week. 

Ron Olds 

On Wed, Nov 16, 2022 at 13:01 Mark Bradakis <mark at bradakis.com> wrote:

> Was cleaning up some stuff and found this.? Can't remember exactly when 
> it was made, or who was responsible for doing so. Maybe 1995 or so? 
> 
> mjb. 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/ronaldolds53 at gmail.com 
> 
-- 
Ronald Olds 
-------------- next part -------------- 
An HTML attachment was scrubbed... 
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/a175a811/attachment-0001.htm>

------------------------------ 

Message: 3 
Date: Wed, 16 Nov 2022 18:27:43 +0000 
From: Michael Marr <mmarr at albiontechnical.com>
To: Mark Bradakis <mark at bradakis.com>
Cc: "triumphs at autox.team.net" <triumphs at autox.team.net>
Subject: Re: [TR] Old badge 
Message-ID: <46396E3F-5367-4FAE-B7FB-49FECF56968F at albiontechnical.com>
Content-Type: text/plain; charset="utf-8" 

I still have two of those. It was made by the master craftsman Joe Curry. He may even have some left.

Mike 

Sent from my iPhone 

On Nov 16, 2022, at 11:57, Mark Bradakis <mark at bradakis.com> wrote:

?Was cleaning up some stuff and found this.? Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?

mjb. 

[20221116_064309.jpg]** triumphs at autox.team.net ** 

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs?http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/mmarr at albiontechnical.com 
-------------- next part -------------- 
An HTML attachment was scrubbed... 
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.htm>
-------------- next part -------------- 
A non-text attachment was scrubbed... 
Name: 20221116_064309.jpg 
Type: image/jpeg 
Size: 310657 bytes 
Desc: 20221116_064309.jpg 
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221116/38fc49e6/attachment-0001.jpg>

------------------------------ 

Subject: Digest Footer 

_______________________________________________ 

Triumphs mailing list 
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


------------------------------ 

End of Triumphs Digest, Vol 15, Issue 191 
*****************************************  
**triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphshttp://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphshttp://www.team.net/archive 

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net  

? 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/45f402a0/attachment.htm>

From keithstewart at bell.net  Thu Nov 17 14:16:09 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Thu, 17 Nov 2022 16:16:09 -0500
Subject: [TR] Old badge
In-Reply-To: <2024893282.1492247.1668689359725@mail.yahoo.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <46396E3F-5367-4FAE-B7FB-49FECF56968F@albiontechnical.com>
 <194382948.1109738.1668626540269@myemail.cox.net>
 <2024893282.1492247.1668689359725@mail.yahoo.com>
Message-ID: <064501d8fac9$d0218da0$7064a8e0$@bell.net>

Sure. What dimensions qualify as? big?? I can scan a single then expand it to ?big buck size?, and take all three. ?

 

Keith

 

From: DAVID MASSEY <dave1massey at cs.com> 
Sent: November 17, 2022 7:49 AM
To: spitlist at cox.net; mmarr at albiontechnical.com; mark at bradakis.com
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

 

Ooooo.  Does that mean I can sell the three I have for big $$$ ?

 

;-)

 

Dave 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221117/d3b98adc/attachment.htm>

From johnbmacartney at gmx.com  Fri Nov 18 03:32:18 2022
From: johnbmacartney at gmx.com (johnbmacartney at gmx.com)
Date: Fri, 18 Nov 2022 10:32:18 -0000
Subject: [TR] Old badge
In-Reply-To: <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
Message-ID: <011601d8fb39$09a53800$1cefa800$@gmx.com>

Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."

Jonmac

-----Original Message-----
From: Jim Henningsen <trguy75 at gmail.com> 
Sent: 16 November 2022 22:11
To: Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 

> On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
> 
> ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> 
> mjb.
> 


From trguy75 at gmail.com  Fri Nov 18 04:54:18 2022
From: trguy75 at gmail.com (Jim Henningsen)
Date: Fri, 18 Nov 2022 06:54:18 -0500
Subject: [TR] Old badge
In-Reply-To: <011601d8fb39$09a53800$1cefa800$@gmx.com>
References: <011601d8fb39$09a53800$1cefa800$@gmx.com>
Message-ID: <A09A9A2F-F908-4733-87CD-06B43DE088FD@gmail.com>

Lovely story.  Fred was the king of kindness and of powder coating.  Always there with helpful tips when you needed help on your TR. Jim

> On Nov 18, 2022, at 5:32 AM, johnbmacartney at gmx.com wrote:
> 
> ?Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."
> 
> Jonmac
> 
> -----Original Message-----
> From: Jim Henningsen <trguy75 at gmail.com> 
> Sent: 16 November 2022 22:11
> To: Mark Bradakis <mark at bradakis.com>
> Cc: triumphs at autox.team.net
> Subject: Re: [TR] Old badge
> 
> I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 
> 
>> On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
>> 
>> ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
>> 
>> mjb.
>> 
> 

From spitlist at cox.net  Fri Nov 18 07:47:09 2022
From: spitlist at cox.net (JOE CURRY)
Date: Fri, 18 Nov 2022 09:47:09 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <011601d8fb39$09a53800$1cefa800$@gmx.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
 <011601d8fb39$09a53800$1cefa800$@gmx.com>
Message-ID: <2130422460.1190807.1668782829341@myemail.cox.net>

Back to the badge issue, John, drove the Stag to the San Luis Obispo VTR that was in  back in 2009.  The car had one of these badges attached to the front (donated by myself), so the production was some time before that date.

Joe

> On November 18, 2022 at 5:32 AM johnbmacartney at gmx.com wrote:
> 
> 
> Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."
> 
> Jonmac
> 
> -----Original Message-----
> From: Jim Henningsen <trguy75 at gmail.com> 
> Sent: 16 November 2022 22:11
> To: Mark Bradakis <mark at bradakis.com>
> Cc: triumphs at autox.team.net
> Subject: Re: [TR] Old badge
> 
> I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 
> 
> > On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
> > 
> > ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > 
> > mjb.
> > 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net

From stagbytriumph at triumphstagclub.org  Fri Nov 18 10:23:29 2022
From: stagbytriumph at triumphstagclub.org (stagbytriumph at triumphstagclub.org)
Date: Fri, 18 Nov 2022 10:23:29 -0700
Subject: [TR] Old badge
In-Reply-To: <011601d8fb39$09a53800$1cefa800$@gmx.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
 <011601d8fb39$09a53800$1cefa800$@gmx.com>
Message-ID: <000001d8fb72$7b648b60$722da220$@triumphstagclub.org>

Oi John, 

Do you still have that Midget "gifted" to you from son #2 stashed away in the friend's barn?  
Gather some younger car people from one of the regional car clubs or tech school, or enthusiasts, start with that Valve Cover and add everything what is needed under the Valve Cover and dump that Morris Garage lump.  
I've seen 4.0 Jaguar DOHC 6's shoehorned into Midgets so a Triumph 2.0 should fit easily and be a welcomed power upgrade.  
Paint her your favorite Russet and name her "Flossie's Calf" Of the "Flying Cow Pie" as it is definitely small enough to park on your cow path street in Eve.
But definitely post a video of you entering and exiting that vehicle if you thought a Spitty or GT6 required knee pads as standard equipment. 

I wonder if a two-week build could be scheduled by some enthusiasts?   Seems to me you park your caravan at that farm too?  That is beds, commode and kitchen!

Anyone game for another charity build to coincide with MG & Triumph Spares Day for parts supply ??

StagByTriumph

-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of johnbmacartney at gmx.com
Sent: Friday, November 18, 2022 3:32 AM
To: 'Jim Henningsen' <trguy75 at gmail.com>; 'Mark Bradakis' <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."

Jonmac

-----Original Message-----
From: Jim Henningsen <trguy75 at gmail.com> 
Sent: 16 November 2022 22:11
To: Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 

> On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
> 
> ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> 
> mjb.
> 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stagbytriumph at triumphstagclub.org


From stagbytriumph at triumphstagclub.org  Fri Nov 18 14:16:17 2022
From: stagbytriumph at triumphstagclub.org (stagbytriumph at triumphstagclub.org)
Date: Fri, 18 Nov 2022 14:16:17 -0700
Subject: [TR] Old badge
In-Reply-To: <2130422460.1190807.1668782829341@myemail.cox.net>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
 <011601d8fb39$09a53800$1cefa800$@gmx.com>
 <2130422460.1190807.1668782829341@myemail.cox.net>
Message-ID: <001a01d8fb93$01295580$037c0080$@triumphstagclub.org>

Solved!  
Okay, my old brain cells are being tricked into releasing their information, which should shake @JOE CURRY 's recollection.

I recalled there was a lot of discussion on the autox.team.net discussion board circa 2006 as a potential fund raiser and email list supporter participant identifier at car shows when these were being produced, but could not put my finger on the exact date.  Searchable archives?    Absolutely!  http://www.team.net/html/triumphs/

The discussions are all on the autox.team.net archives here http://www.team.net/mharc/archives/cgi-bin/namazu.cgi?query=grill+badge&submit=Search%21&idxname=triumphs&max=20&result=normal&sort=score  subjects of 'List Grill Badges' and 'Triumph List "Grill" Badges'

I think the Autox.team.net email list badges "may have" been made by Quality Lapel Pins, the US vendor of many other Triumph/British Car and auto club Badges.  @JOE CURRY, I think you were the driver for that project? There is mention of a Canadian vendor too.

I used QLP for the North American Stag Club grill, lapel (2002) and key fob (2004) badges I designed and had made which started back in the early 2002 which may have been around the time the Autox badges were being designed.   It may have been Fred who told me about QLP but my memory hasn't released that detail.  

@JOE CURRY  So I dug out an old email between you and me dated ~April 2007 discussing producing/selling the badges and options for sending them overseas, issues about collecting funds from overseas Autox members, so that got me looking through the autox.team.net archives it was indeed around mid 2006 which I confirmed by searching the autox.team.net archives.  That does not fit with them being passed out by Fred at TRF in 2003/4 though. But that fits for them being manufactured before the TTA Triumph Trans AmeriCAN charity drive in 2009. Your and my discussion was because we were sending the TSCUSA badges globally to members and using PayPal and you needed a way to sell badges and collect the money.

Joe, Remember?

Glenn aka StagByTriumph

-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of JOE CURRY
Sent: Friday, November 18, 2022 7:47 AM
To: johnbmacartney at gmx.com; Jim Henningsen <trguy75 at gmail.com>; Mark Bradakis <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

Back to the badge issue, John, drove the Stag to the San Luis Obispo VTR that was in  back in 2009.  The car had one of these badges attached to the front (donated by myself), so the production was some time before that date.

Joe

> On November 18, 2022 at 5:32 AM johnbmacartney at gmx.com wrote:
> 
> 
> Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."
> 
> Jonmac
> 
> -----Original Message-----
> From: Jim Henningsen <trguy75 at gmail.com> 
> Sent: 16 November 2022 22:11
> To: Mark Bradakis <mark at bradakis.com>
> Cc: triumphs at autox.team.net
> Subject: Re: [TR] Old badge
> 
> I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 
> 
> > On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
> > 
> > ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > 
> > mjb.
> > 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stagbytriumph at triumphstagclub.org


From spitlist at cox.net  Fri Nov 18 14:32:21 2022
From: spitlist at cox.net (JOE CURRY)
Date: Fri, 18 Nov 2022 16:32:21 -0500 (EST)
Subject: [TR] Old badge
In-Reply-To: <001a01d8fb93$01295580$037c0080$@triumphstagclub.org>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
 <011601d8fb39$09a53800$1cefa800$@gmx.com>
 <2130422460.1190807.1668782829341@myemail.cox.net>
 <001a01d8fb93$01295580$037c0080$@triumphstagclub.org>
Message-ID: <163757279.1198830.1668807141731@myemail.cox.net>

Yes, I recall.  As a matter of fact I still have the lead proof slug the vendor sent me.

Joe

> On November 18, 2022 at 4:16 PM stagbytriumph at triumphstagclub.org wrote:
> 
> 
> Solved!  
> Okay, my old brain cells are being tricked into releasing their information, which should shake @JOE CURRY 's recollection.
> 
> I recalled there was a lot of discussion on the autox.team.net discussion board circa 2006 as a potential fund raiser and email list supporter participant identifier at car shows when these were being produced, but could not put my finger on the exact date.  Searchable archives?    Absolutely!  http://www.team.net/html/triumphs/
> 
> The discussions are all on the autox.team.net archives here http://www.team.net/mharc/archives/cgi-bin/namazu.cgi?query=grill+badge&submit=Search%21&idxname=triumphs&max=20&result=normal&sort=score  subjects of 'List Grill Badges' and 'Triumph List "Grill" Badges'
> 
> I think the Autox.team.net email list badges "may have" been made by Quality Lapel Pins, the US vendor of many other Triumph/British Car and auto club Badges.  @JOE CURRY, I think you were the driver for that project? There is mention of a Canadian vendor too.
> 
> I used QLP for the North American Stag Club grill, lapel (2002) and key fob (2004) badges I designed and had made which started back in the early 2002 which may have been around the time the Autox badges were being designed.   It may have been Fred who told me about QLP but my memory hasn't released that detail.  
> 
> @JOE CURRY  So I dug out an old email between you and me dated ~April 2007 discussing producing/selling the badges and options for sending them overseas, issues about collecting funds from overseas Autox members, so that got me looking through the autox.team.net archives it was indeed around mid 2006 which I confirmed by searching the autox.team.net archives.  That does not fit with them being passed out by Fred at TRF in 2003/4 though. But that fits for them being manufactured before the TTA Triumph Trans AmeriCAN charity drive in 2009. Your and my discussion was because we were sending the TSCUSA badges globally to members and using PayPal and you needed a way to sell badges and collect the money.
> 
> Joe, Remember?
> 
> Glenn aka StagByTriumph
> 
> -----Original Message-----
> From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of JOE CURRY
> Sent: Friday, November 18, 2022 7:47 AM
> To: johnbmacartney at gmx.com; Jim Henningsen <trguy75 at gmail.com>; Mark Bradakis <mark at bradakis.com>
> Cc: triumphs at autox.team.net
> Subject: Re: [TR] Old badge
> 
> Back to the badge issue, John, drove the Stag to the San Luis Obispo VTR that was in  back in 2009.  The car had one of these badges attached to the front (donated by myself), so the production was some time before that date.
> 
> Joe
> 
> > On November 18, 2022 at 5:32 AM johnbmacartney at gmx.com wrote:
> > 
> > 
> > Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."
> > 
> > Jonmac
> > 
> > -----Original Message-----
> > From: Jim Henningsen <trguy75 at gmail.com> 
> > Sent: 16 November 2022 22:11
> > To: Mark Bradakis <mark at bradakis.com>
> > Cc: triumphs at autox.team.net
> > Subject: Re: [TR] Old badge
> > 
> > I remember Fred Thomas giving these out at The Roadster Factory Party in 2003 or 2004?  Joe Curry, does that timeframe ring a bell or was it another pin or date.  Rest In Peace Fred.  I miss you. Jim Henningsen 
> > 
> > > On Nov 16, 2022, at 1:04 PM, Mark Bradakis <mark at bradakis.com> wrote:
> > > 
> > > ?Was cleaning up some stuff and found this.  Can't remember exactly when it was made, or who was responsible for doing so. Maybe 1995 or so?
> > > 
> > > mjb.
> > > 
> > 
> > ** triumphs at autox.team.net **
> > 
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> > 
> > Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stagbytriumph at triumphstagclub.org
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20221118_142622.jpg
Type: image/jpeg
Size: 221655 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221118/4548ed74/attachment.jpg>

From stagbytriumph at triumphstagclub.org  Fri Nov 18 14:41:30 2022
From: stagbytriumph at triumphstagclub.org (stagbytriumph at triumphstagclub.org)
Date: Fri, 18 Nov 2022 14:41:30 -0700
Subject: [TR] Mr. Fluif ??
Message-ID: <002201d8fb96$86364780$92a2d680$@triumphstagclub.org>

Isn't that title owned and copyrighted by the originator, Bill Pugh?

 

StagByTriumph

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221118/16af4496/attachment.htm>

From keithstewart at bell.net  Fri Nov 18 17:04:53 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Fri, 18 Nov 2022 19:04:53 -0500
Subject: [TR] Old badge
In-Reply-To: <011601d8fb39$09a53800$1cefa800$@gmx.com>
References: <a3eeb7d1-977f-92bf-f090-56f6769be11d@bradakis.com>
 <CBFBE2EC-5071-4576-939F-8C32F1E21D70@gmail.com>
 <011601d8fb39$09a53800$1cefa800$@gmx.com>
Message-ID: <08d201d8fbaa$8e112510$aa336f30$@bell.net>

Ahh, Mr. Powder Coat. I had the honour of giving a bit of a eulogy to Fred at TRF's Summer Party following Fred's passing in 2011. I still think of him often and wonder what ever became of his beloved TR3A. I spoke with his wife in preparation for speaking about Fred and again afterwards when I gave her a copy of what I said to the Summer Party gathering. At that time she had no plans to get rid of the car.

Thanks for another memory of Fred.

Keith


-----Original Message-----
From: johnbmacartney at gmx.com <johnbmacartney at gmx.com> 
Sent: November 18, 2022 5:32 AM
To: 'Jim Henningsen' <trguy75 at gmail.com>; 'Mark Bradakis' <mark at bradakis.com>
Cc: triumphs at autox.team.net
Subject: Re: [TR] Old badge

Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."

Jonmac
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FredThomas.pdf
Type: application/pdf
Size: 588882 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221118/1131a611/attachment.pdf>

From dave1massey at cs.com  Fri Nov 18 17:05:51 2022
From: dave1massey at cs.com (DAVID MASSEY)
Date: Sat, 19 Nov 2022 00:05:51 +0000 (UTC)
Subject: [TR] Mr. Fluif ??
In-Reply-To: <002201d8fb96$86364780$92a2d680$@triumphstagclub.org>
References: <002201d8fb96$86364780$92a2d680$@triumphstagclub.org>
Message-ID: <928437208.2309461.1668816351060@mail.yahoo.com>

 I believe the original typo was from Joe Curry, although Bill may have been the main instigator in getting it traction making it a permanent fixture in our culture today.
 
Dave 


 
 
-----Original Message-----
From: stagbytriumph at triumphstagclub.org
To: triumphs at autox.team.net
Sent: Fri, Nov 18, 2022 3:41 pm
Subject: [TR] Mr. Fluif ??

<!--#yiv2441520589 filtered {}#yiv2441520589 filtered {}#yiv2441520589 p.yiv2441520589MsoNormal, #yiv2441520589 li.yiv2441520589MsoNormal, #yiv2441520589 div.yiv2441520589MsoNormal {margin:0in;font-size:11.0pt;font-family:"Calibri", sans-serif;}#yiv2441520589 span.yiv2441520589EmailStyle17 {font-family:"Calibri", sans-serif;color:windowtext;}#yiv2441520589 .yiv2441520589MsoChpDefault {font-family:"Calibri", sans-serif;}#yiv2441520589 filtered {}#yiv2441520589 div.yiv2441520589WordSection1 {}-->Isn?t that title owned and copyrighted by the originator, Bill Pugh? ?StagByTriumph** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey at cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221119/b9a1c24b/attachment.htm>

From trguy75 at gmail.com  Fri Nov 18 17:15:07 2022
From: trguy75 at gmail.com (Jim Henningsen)
Date: Fri, 18 Nov 2022 19:15:07 -0500
Subject: [TR] Old badge
In-Reply-To: <08d201d8fbaa$8e112510$aa336f30$@bell.net>
References: <08d201d8fbaa$8e112510$aa336f30$@bell.net>
Message-ID: <89057CF0-285E-4FD2-A366-FEE27F9076B9@gmail.com>

Fred?s TR3 was sold by a dealer online. I remember it on eBay and somewhere else.  I hope someone who knew him bought that car. Jim

> On Nov 18, 2022, at 7:05 PM, keithstewart at bell.net wrote:
> 
> ?Ahh, Mr. Powder Coat. I had the honour of giving a bit of a eulogy to Fred at TRF's Summer Party following Fred's passing in 2011. I still think of him often and wonder what ever became of his beloved TR3A. I spoke with his wife in preparation for speaking about Fred and again afterwards when I gave her a copy of what I said to the Summer Party gathering. At that time she had no plans to get rid of the car.
> 
> Thanks for another memory of Fred.
> 
> Keith
> 
> 
> -----Original Message-----
> From: johnbmacartney at gmx.com <johnbmacartney at gmx.com> 
> Sent: November 18, 2022 5:32 AM
> To: 'Jim Henningsen' <trguy75 at gmail.com>; 'Mark Bradakis' <mark at bradakis.com>
> Cc: triumphs at autox.team.net
> Subject: Re: [TR] Old badge
> 
> Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."
> 
> Jonmac
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FredThomas.pdf
Type: application/pdf
Size: 588882 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221118/3ce071ea/attachment.pdf>

From yellowtr at adelphia.net  Sat Nov 19 07:08:58 2022
From: yellowtr at adelphia.net (Bob)
Date: Sat, 19 Nov 2022 09:08:58 -0500
Subject: [TR] Old badge
In-Reply-To: <89057CF0-285E-4FD2-A366-FEE27F9076B9@gmail.com>
References: <08d201d8fbaa$8e112510$aa336f30$@bell.net>
 <89057CF0-285E-4FD2-A366-FEE27F9076B9@gmail.com>
Message-ID: <6366c274-a6ab-5c3a-e1cc-2fbacd81fb0b@adelphia.net>

Fred powder coated the part that connects the floor to the dash board on 
my TR4. Beautiful job. I went on line and ordered him a 6 pack of Pale 
Ale because he refused to take a check. We have and continue to have a 
bunch of great people on this list. Some have passed but the memories 
will go on forever. And yes the badge, one on the 3 and one on the 4. 
They were all gone when the 6 was finished.

Believe it or not I have given this list's URL to a few young guys 
seeking advice on their restorations, both Triumph and MG directly from 
the badge at car hops. All they needed to do is whip out their phone.

I am really enjoying this thread.

Bob

On 11/18/22 7:15 PM, Jim Henningsen wrote:
> Fred?s TR3 was sold by a dealer online. I remember it on eBay and somewhere else.  I hope someone who knew him bought that car. Jim
>
>> On Nov 18, 2022, at 7:05 PM, keithstewart at bell.net wrote:
>>
>> ?Ahh, Mr. Powder Coat. I had the honour of giving a bit of a eulogy to Fred at TRF's Summer Party following Fred's passing in 2011. I still think of him often and wonder what ever became of his beloved TR3A. I spoke with his wife in preparation for speaking about Fred and again afterwards when I gave her a copy of what I said to the Summer Party gathering. At that time she had no plans to get rid of the car.
>>
>> Thanks for another memory of Fred.
>>
>> Keith
>>
>>
>> -----Original Message-----
>> From: johnbmacartney at gmx.com <johnbmacartney at gmx.com>
>> Sent: November 18, 2022 5:32 AM
>> To: 'Jim Henningsen' <trguy75 at gmail.com>; 'Mark Bradakis' <mark at bradakis.com>
>> Cc: triumphs at autox.team.net
>> Subject: Re: [TR] Old badge
>>
>> Dear dear Fred Thomas! A lovely man and I miss him too. He came to the UK in about 2000 for a vacation and we spent the day in my Triumph 2000 saloon driving one of the former factory test routes. Fred was fascinated in the way I used the overdrive and said so many nice things about it. When he went home he asked for my address as he wanted to send me something to say thank you for the day we shared together. About three weeks later, a long parcel arrived at my home and on unpacking it, lo and behold was a beautiful powder-coated valve cover he'd done for me. It went straight on the car and stayed there until I sold it and put the old one back in place. I've still got it and dearly wish I'd got a car to fit it to but I'm now too long in the tooth "to play with Triumphs myself."
>>
>> Jonmac
>>
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr at adelphia.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221119/aca7cf50/attachment.htm>

From keithstewart at bell.net  Mon Nov 21 17:36:30 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Mon, 21 Nov 2022 19:36:30 -0500
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <mailman.10.1668884404.10645.triumphs@autox.team.net>
References: <mailman.10.1668884404.10645.triumphs@autox.team.net>
Message-ID: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>

I know there are many storage racks for the TR6 hardtop and similar - I have
one for my wife's Stag. I am looking for something I might use for the
TR4/4A/5/250 hardtop panel when it is removed to install the Surrey top. I
am thinking of something built from wood, on casters to roll around. I would
think the design would be pretty simple but thought I would check here first
in case someone has the already done the dimensions and plan. If so, they
might also have suggestions. Thanks in advance for any assistance you might
provide

Keith Stewart


From john at linneyweb.com  Mon Nov 21 21:08:26 2022
From: john at linneyweb.com (John Linney)
Date: Mon, 21 Nov 2022 20:08:26 -0800
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
References: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
Message-ID: <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>

I bought a flat screen TV shipping / moving box from U-Haul. Works perfectly in combination with a blanket. It even comes with foam spacers to protect the LCD screen.


> On Nov 21, 2022, at 4:53 PM, keithstewart at bell.net wrote:
> 
> ?I know there are many storage racks for the TR6 hardtop and similar - I have
> one for my wife's Stag. I am looking for something I might use for the
> TR4/4A/5/250 hardtop panel when it is removed to install the Surrey top. I
> am thinking of something built from wood, on casters to roll around. I would
> think the design would be pretty simple but thought I would check here first
> in case someone has the already done the dimensions and plan. If so, they
> might also have suggestions. Thanks in advance for any assistance you might
> provide
> 
> Keith Stewart
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/john at linneyweb.com


From keithstewart at bell.net  Tue Nov 22 04:35:51 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Tue, 22 Nov 2022 06:35:51 -0500
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>
References: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
 <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>
Message-ID: <002d01d8fe66$94d47320$be7d5960$@bell.net>

Thanks John. I will check that out.

Keith

-----Original Message-----
From: John Linney <john at linneyweb.com> 
Sent: November 21, 2022 11:08 PM
To: keithstewart at bell.net
Cc: triumphs at autox.team.net
Subject: Re: [TR] Triumph Hardtop Rack

I bought a flat screen TV shipping / moving box from U-Haul. Works perfectly in combination with a blanket. It even comes with foam spacers to protect the LCD screen.


> On Nov 21, 2022, at 4:53 PM, keithstewart at bell.net wrote:
> 
> ?I know there are many storage racks for the TR6 hardtop and similar - 
> I have one for my wife's Stag. I am looking for something I might use 
> for the
> TR4/4A/5/250 hardtop panel when it is removed to install the Surrey 
> top. I am thinking of something built from wood, on casters to roll 
> around. I would think the design would be pretty simple but thought I 
> would check here first in case someone has the already done the 
> dimensions and plan. If so, they might also have suggestions. Thanks 
> in advance for any assistance you might provide
> 
> Keith Stewart
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  
> http://www.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/john at linneyweb.com



From 75tr6 at tr6.danielsonfamily.org  Tue Nov 22 05:24:19 2022
From: 75tr6 at tr6.danielsonfamily.org (Bob Danielson)
Date: Tue, 22 Nov 2022 07:24:19 -0500
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <002d01d8fe66$94d47320$be7d5960$@bell.net>
References: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
 <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>
 <002d01d8fe66$94d47320$be7d5960$@bell.net>
Message-ID: <1N1g7Y-1p3wa42wP2-0121rD@mrelay.perfora.net>

Paul Rego made one and shared the specs in the 6=Pack Forum years ago 
http://www.74tr6.com/hardtopcarrier.htm

Bob

Bob Danielson
TR6 Interior Panels, Boot Covers and Fender Blankets
http://tr6.danielsonfamily.org/PanelBootSales1.htm

From: keithstewart at bell.net
Sent: Tuesday, November 22, 2022 6:36 AM
To: 'John Linney'
Cc: triumphs at autox.team.net
Subject: Re: [TR] Triumph Hardtop Rack

Thanks John. I will check that out.

Keith

-----Original Message-----
From: John Linney <john at linneyweb.com> 
Sent: November 21, 2022 11:08 PM
To: keithstewart at bell.net
Cc: triumphs at autox.team.net
Subject: Re: [TR] Triumph Hardtop Rack

I bought a flat screen TV shipping / moving box from U-Haul. Works perfectly in combination with a blanket. It even comes with foam spacers to protect the LCD screen.


> On Nov 21, 2022, at 4:53 PM, keithstewart at bell.net wrote:
> 
> ?I know there are many storage racks for the TR6 hardtop and similar - 
> I have one for my wife's Stag. I am looking for something I might use 
> for the
> TR4/4A/5/250 hardtop panel when it is removed to install the Surrey 
> top. I am thinking of something built from wood, on casters to roll 
> around. I would think the design would be pretty simple but thought I 
> would check here first in case someone has the already done the 
> dimensions and plan. If so, they might also have suggestions. Thanks 
> in advance for any assistance you might provide
> 
> Keith Stewart
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  
> http://www.team.net/archive
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/triumphs/john at linneyweb.com


** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221122/24fd5235/attachment.htm>

From keithstewart at bell.net  Tue Nov 22 05:51:42 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Tue, 22 Nov 2022 07:51:42 -0500
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <1N1g7Y-1p3wa42wP2-0121rD@mrelay.perfora.net>
References: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
 <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>
 <002d01d8fe66$94d47320$be7d5960$@bell.net>
 <1N1g7Y-1p3wa42wP2-0121rD@mrelay.perfora.net>
Message-ID: <0dcf01d8fe71$2b9e64f0$82db2ed0$@bell.net>

Thanks Bob. Modifying those dimensions might help, but I am looking to store the 4/4A/5/250 lift off panel, not TR6 dimensions. I am trying to avoid the wider base necessary to store a TR6 type of hardtop.

 

Keith

 

From: Bob Danielson <75tr6 at tr6.danielsonfamily.org> 
Sent: November 22, 2022 7:24 AM
To: keithstewart at bell.net; 'John Linney' <john at linneyweb.com>
Cc: triumphs at autox.team.net
Subject: RE: [TR] Triumph Hardtop Rack

 

Paul Rego made one and shared the specs in the 6=Pack Forum years ago 

http://www.74tr6.com/hardtopcarrier.htm

 

Bob

 

Bob Danielson
TR6 Interior Panels, Boot Covers and Fender Blankets
http://tr6.danielsonfamily.org/PanelBootSales1.htm

 

From: keithstewart at bell.net <mailto:keithstewart at bell.net> 
Sent: Tuesday, November 22, 2022 6:36 AM
To: 'John Linney' <mailto:john at linneyweb.com> 
Cc: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 
Subject: Re: [TR] Triumph Hardtop Rack

 

Thanks John. I will check that out.

 

Keith

 

-----Original Message-----

From: John Linney <john at linneyweb.com <mailto:john at linneyweb.com> > 

Sent: November 21, 2022 11:08 PM

To: keithstewart at bell.net <mailto:keithstewart at bell.net> 

Cc: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 

Subject: Re: [TR] Triumph Hardtop Rack

 

I bought a flat screen TV shipping / moving box from U-Haul. Works perfectly in combination with a blanket. It even comes with foam spacers to protect the LCD screen.

 

 

> On Nov 21, 2022, at 4:53 PM, keithstewart at bell.net <mailto:keithstewart at bell.net>  wrote:

> 

> ?I know there are many storage racks for the TR6 hardtop and similar - 

> I have one for my wife's Stag. I am looking for something I might use 

> for the

> TR4/4A/5/250 hardtop panel when it is removed to install the Surrey 

> top. I am thinking of something built from wood, on casters to roll 

> around. I would think the design would be pretty simple but thought I 

> would check here first in case someone has the already done the 

> dimensions and plan. If so, they might also have suggestions. Thanks 

> in advance for any assistance you might provide

> 

> Keith Stewart

> 

> ** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

> 

> Donate: http://www.team.net/donate.html

> Archive: http://www.team.net/pipermail/triumphs  

> http://www.team.net/archive

> 

> Unsubscribe/Manage: 

> http://autox.team.net/mailman/options/triumphs/john at linneyweb.com

 

 

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

 

Donate: http://www.team.net/donate.html

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

 

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221122/e3b198e0/attachment.htm>

From grglmn at gmail.com  Tue Nov 22 06:25:31 2022
From: grglmn at gmail.com (Greg Lemon)
Date: Tue, 22 Nov 2022 07:25:31 -0600
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <0dcf01d8fe71$2b9e64f0$82db2ed0$@bell.net>
References: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
 <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>
 <002d01d8fe66$94d47320$be7d5960$@bell.net>
 <1N1g7Y-1p3wa42wP2-0121rD@mrelay.perfora.net>
 <0dcf01d8fe71$2b9e64f0$82db2ed0$@bell.net>
Message-ID: <CAFtw3aar9oH1H-tvO7kAWpfJETDkW2Uk2d-d3XYW+VJTvUx12w@mail.gmail.com>

The Porsche 924/944 has a big sunroof.  The came with padded a storage
bag.  I am sure you can pick me me up on eBay. I know not exactly what you
asked for, but can get dimensions if you want.

Greg Lemon
TR250

On Tue, Nov 22, 2022, 6:58 AM <keithstewart at bell.net> wrote:

> Thanks Bob. Modifying those dimensions might help, but I am looking to
> store the 4/4A/5/250 lift off panel, not TR6 dimensions. I am trying to
> avoid the wider base necessary to store a TR6 type of hardtop.
>
>
>
> Keith
>
>
>
> *From:* Bob Danielson <75tr6 at tr6.danielsonfamily.org>
> *Sent:* November 22, 2022 7:24 AM
> *To:* keithstewart at bell.net; 'John Linney' <john at linneyweb.com>
> *Cc:* triumphs at autox.team.net
> *Subject:* RE: [TR] Triumph Hardtop Rack
>
>
>
> Paul Rego made one and shared the specs in the 6=Pack Forum years ago
>
> http://www.74tr6.com/hardtopcarrier.htm
>
>
>
> Bob
>
>
>
> Bob Danielson
> TR6 Interior Panels, Boot Covers and Fender Blankets
> http://tr6.danielsonfamily.org/PanelBootSales1.htm
>
>
>
> *From: *keithstewart at bell.net
> *Sent: *Tuesday, November 22, 2022 6:36 AM
> *To: *'John Linney' <john at linneyweb.com>
> *Cc: *triumphs at autox.team.net
> *Subject: *Re: [TR] Triumph Hardtop Rack
>
>
>
> Thanks John. I will check that out.
>
>
>
> Keith
>
>
>
> -----Original Message-----
>
> From: John Linney <john at linneyweb.com>
>
> Sent: November 21, 2022 11:08 PM
>
> To: keithstewart at bell.net
>
> Cc: triumphs at autox.team.net
>
> Subject: Re: [TR] Triumph Hardtop Rack
>
>
>
> I bought a flat screen TV shipping / moving box from U-Haul. Works
> perfectly in combination with a blanket. It even comes with foam spacers to
> protect the LCD screen.
>
>
>
>
>
> > On Nov 21, 2022, at 4:53 PM, keithstewart at bell.net wrote:
>
> >
>
> > ?I know there are many storage racks for the TR6 hardtop and similar -
>
> > I have one for my wife's Stag. I am looking for something I might use
>
> > for the
>
> > TR4/4A/5/250 hardtop panel when it is removed to install the Surrey
>
> > top. I am thinking of something built from wood, on casters to roll
>
> > around. I would think the design would be pretty simple but thought I
>
> > would check here first in case someone has the already done the
>
> > dimensions and plan. If so, they might also have suggestions. Thanks
>
> > in advance for any assistance you might provide
>
> >
>
> > Keith Stewart
>
> >
>
> > ** triumphs at autox.team.net **
>
> >
>
> > Donate: http://www.team.net/donate.html
>
> > Archive: http://www.team.net/pipermail/triumphs
>
> > http://www.team.net/archive
>
> >
>
> > Unsubscribe/Manage:
>
> > http://autox.team.net/mailman/options/triumphs/john at linneyweb.com
>
>
>
>
>
> ** triumphs at autox.team.net **
>
>
>
> Donate: http://www.team.net/donate.html
>
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
>
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/grglmn at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221122/c03e725b/attachment.htm>

From keithstewart at bell.net  Tue Nov 22 06:59:06 2022
From: keithstewart at bell.net (keithstewart at bell.net)
Date: Tue, 22 Nov 2022 08:59:06 -0500
Subject: [TR] Triumph Hardtop Rack
In-Reply-To: <CAFtw3aar9oH1H-tvO7kAWpfJETDkW2Uk2d-d3XYW+VJTvUx12w@mail.gmail.com>
References: <0d8701d8fe0a$7710afe0$65320fa0$@bell.net>
 <11EDEBB6-D719-4932-8681-34A62401D94E@linneyweb.com>
 <002d01d8fe66$94d47320$be7d5960$@bell.net>
 <1N1g7Y-1p3wa42wP2-0121rD@mrelay.perfora.net>
 <0dcf01d8fe71$2b9e64f0$82db2ed0$@bell.net>
 <CAFtw3aar9oH1H-tvO7kAWpfJETDkW2Uk2d-d3XYW+VJTvUx12w@mail.gmail.com>
Message-ID: <0e1801d8fe7a$9618e9f0$c24abdd0$@bell.net>

Thanks Greg. That looks interesting. I have contacted a couple of sellers to find out the inside dimensions of the bag.

 

Keith

 

From: Greg Lemon <grglmn at gmail.com> 
Sent: November 22, 2022 8:26 AM
To: Keith Stewart <keithstewart at bell.net>
Cc: Triumphs <triumphs at autox.team.net>
Subject: Re: [TR] Triumph Hardtop Rack

 

The Porsche 924/944 has a big sunroof.  The came with padded a storage bag.  I am sure you can pick me me up on eBay. I know not exactly what you asked for, but can get dimensions if you want.

 

Greg Lemon

TR250

 

On Tue, Nov 22, 2022, 6:58 AM <keithstewart at bell.net <mailto:keithstewart at bell.net> > wrote:

Thanks Bob. Modifying those dimensions might help, but I am looking to store the 4/4A/5/250 lift off panel, not TR6 dimensions. I am trying to avoid the wider base necessary to store a TR6 type of hardtop.

 

Keith

 

From: Bob Danielson <75tr6 at tr6.danielsonfamily.org <mailto:75tr6 at tr6.danielsonfamily.org> > 
Sent: November 22, 2022 7:24 AM
To: keithstewart at bell.net <mailto:keithstewart at bell.net> ; 'John Linney' <john at linneyweb.com <mailto:john at linneyweb.com> >
Cc: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 
Subject: RE: [TR] Triumph Hardtop Rack

 

Paul Rego made one and shared the specs in the 6=Pack Forum years ago 

http://www.74tr6.com/hardtopcarrier.htm

 

Bob

 

Bob Danielson
TR6 Interior Panels, Boot Covers and Fender Blankets
http://tr6.danielsonfamily.org/PanelBootSales1.htm

 

From: keithstewart at bell.net <mailto:keithstewart at bell.net> 
Sent: Tuesday, November 22, 2022 6:36 AM
To: 'John Linney' <mailto:john at linneyweb.com> 
Cc: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 
Subject: Re: [TR] Triumph Hardtop Rack

 

Thanks John. I will check that out.

 

Keith

 

-----Original Message-----

From: John Linney <john at linneyweb.com <mailto:john at linneyweb.com> > 

Sent: November 21, 2022 11:08 PM

To: keithstewart at bell.net <mailto:keithstewart at bell.net> 

Cc: triumphs at autox.team.net <mailto:triumphs at autox.team.net> 

Subject: Re: [TR] Triumph Hardtop Rack

 

I bought a flat screen TV shipping / moving box from U-Haul. Works perfectly in combination with a blanket. It even comes with foam spacers to protect the LCD screen.

 

 

> On Nov 21, 2022, at 4:53 PM, keithstewart at bell.net <mailto:keithstewart at bell.net>  wrote:

> 

> ?I know there are many storage racks for the TR6 hardtop and similar - 

> I have one for my wife's Stag. I am looking for something I might use 

> for the

> TR4/4A/5/250 hardtop panel when it is removed to install the Surrey 

> top. I am thinking of something built from wood, on casters to roll 

> around. I would think the design would be pretty simple but thought I 

> would check here first in case someone has the already done the 

> dimensions and plan. If so, they might also have suggestions. Thanks 

> in advance for any assistance you might provide

> 

> Keith Stewart

> 

> ** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

> 

> Donate: http://www.team.net/donate.html

> Archive: http://www.team.net/pipermail/triumphs  

> http://www.team.net/archive

> 

> Unsubscribe/Manage: 

> http://autox.team.net/mailman/options/triumphs/john at linneyweb.com

 

 

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

 

Donate: http://www.team.net/donate.html

Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

 

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org

 

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/grglmn at gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221122/adf4f9f2/attachment.htm>

From forzion7 at gmail.com  Tue Nov 22 10:45:07 2022
From: forzion7 at gmail.com (David Friedlander)
Date: Tue, 22 Nov 2022 12:45:07 -0500
Subject: [TR] =?utf-8?q?It=E2=80=99s_Getting_Close!?=
Message-ID: <CAJ1eQwhav+mH9-GUkXih4rvhNmMmRREE51Mho8kCVXWLN4wL1Q@mail.gmail.com>

Greetings all!

Despite all the crazy things going on in this world, I find I have many
things for which I am thankful? No doubt, you do, too?

A Happy and Safe Thanksgiving to all!! ? ?

Dave
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221122/7c402bf7/attachment.htm>

From notakitcar at yahoo.com  Tue Nov 22 16:18:22 2022
From: notakitcar at yahoo.com (bill beecher)
Date: Tue, 22 Nov 2022 17:18:22 -0600
Subject: [TR] =?utf-8?q?It=E2=80=99s_Getting_Close!?=
In-Reply-To: <CAJ1eQwhav+mH9-GUkXih4rvhNmMmRREE51Mho8kCVXWLN4wL1Q@mail.gmail.com>
References: <CAJ1eQwhav+mH9-GUkXih4rvhNmMmRREE51Mho8kCVXWLN4wL1Q@mail.gmail.com>
Message-ID: <E976CB2A-E5B3-4173-AC92-643BD1A1FBCC@yahoo.com>

Indeed Dave!  Starting with this list and all the invaluable help over the years. 
Bill B
TS30800L

?Do your best, and let the sparrows twitter?  Lofty

On Nov 22, 2022, at 11:51 AM, David Friedlander <forzion7 at gmail.com> wrote:

?Greetings all!

Despite all the crazy things going on in this world, I find I have many things for which I am thankful? No doubt, you do, too?

A Happy and Safe Thanksgiving to all!! ? ?

Dave
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar at yahoo.com


From dconnitt at fuse.net  Sat Nov 26 15:14:59 2022
From: dconnitt at fuse.net (Dave Connitt)
Date: Sat, 26 Nov 2022 17:14:59 -0500
Subject: [TR] Shift fork o-rings
Message-ID: <13B02BCB-B205-4D5D-8CE2-9BE2A6493B5F@fuse.net>

Do yes anyone know where I can buy a new set of the shift rod o-rings for my TR4A transmission. I don?t see them listed in either the Moss catalog or The Roadster Factory.
Thanks,
Dave Connitt

Sent from my iPhone

From dconnitt at fuse.net  Sat Nov 26 17:01:54 2022
From: dconnitt at fuse.net (Dave Connitt)
Date: Sat, 26 Nov 2022 19:01:54 -0500
Subject: [TR] Shift fork o-rings
Message-ID: <4594489C-CFEC-4D19-90EA-5B4BAD235698@fuse.net>

To all,
I found the parts I needed on the Moss website?
Thanks,
Dave Connitt

Sent from my iPhone

From cliff_hansen at outlook.com  Sat Nov 26 18:43:34 2022
From: cliff_hansen at outlook.com (Cliff Hansen)
Date: Sun, 27 Nov 2022 01:43:34 +0000
Subject: [TR] Shift fork o-rings
In-Reply-To: <13B02BCB-B205-4D5D-8CE2-9BE2A6493B5F@fuse.net>
References: <13B02BCB-B205-4D5D-8CE2-9BE2A6493B5F@fuse.net>
Message-ID: <SJ0PR14MB461398B73802160407BF4693FA109@SJ0PR14MB4613.namprd14.prod.outlook.com>

I?ve got a bag full, happy to send you some.

Cliff


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

From: Dave Connitt<mailto:dconnitt at fuse.net>
Sent: Saturday, November 26, 2022 4:47 PM
To: Triumphs<mailto:triumphs at autox.team.net>
Subject: [TR] Shift fork o-rings

Do yes anyone know where I can buy a new set of the shift rod o-rings for my TR4A transmission. I don?t see them listed in either the Moss catalog or The Roadster Factory.
Thanks,
Dave Connitt

Sent from my iPhone
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/cliff_hansen at outlook.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221127/b58c1051/attachment.htm>