[TR] TR3a Smith's heater fan ground wire

[DAVID MASSEY]

 On a scale of one to ten this is about a .02.  I've committed a couple of goofs recently that were 12.5.  If you feel tempted to administer a dope-slap to your self, use just one finger.  And your pinky at that.
I wish all of my problems were that easy to resolve.
Good job!
 
Dave 

 
 
-----Original Message-----
From: Art McEwen <artwmcewen at gmail.com>
To: triumphs at autox.team.net
Sent: Sun, May 29, 2022 10:20 am
Subject: Re: [TR] TR3a Smith's heater fan ground wire

Well that was almost too easy.   Turns out when I replaced the heater hoses last year I neglected to even re-attach the ground wire, it must have been lying against a convenient ground right up until last week.
On Sat, May 28, 2022 at 2:40 PM Art McEwen <artwmcewen at gmail.com> wrote:

Any idea where it should be?   Fan stopped working soon after the OEM reostat failed (replaced by simple toggle) which was soon after one of the heater hoses cracked at the core side.    I'm assuming it's the fan that's shot but I'm willing to place a long shot bet on the ground wire before I tackle that job again.
Thanks,

Art
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220529/f85b6af6/attachment.htm>