[TR] Tr3 fuel pump mesh pn500419

[Cliff Hansen]

As an alternative to hylomar, I use Permatex #2 or its equivalent for most gaskets not in direct contact with fuel, it’s non-hardening, fills pits and is soluble in alcohol.

Cliff


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

From: Frank Fisher<mailto:yellowtr3 at yahoo.com>
Sent: Thursday, May 5, 2022 2:03 PM
To: triumphs at autox.team.net<mailto:triumphs at autox.team.net>; Art McEwen<mailto:artwmcewen at gmail.com>
Subject: Re: [TR] Tr3 fuel pump mesh pn500419

use hylomar. never sets up like permatex. easy clean up if you have to take it apart.

frank

On Thursday, May 5, 2022, 10:34:44 AM PDT, Art McEwen <artwmcewen at gmail.com> wrote:


Anybody have a North American source for this?  All my expensive gas is getting past the edges of my current one.

The upper cap where the gasket & mesh seat is all pitted.  I’m hesitant to use gasket goop around the rim ‘cause some day I have to remove said goop.

Art
** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs <http://www.team.net/pipermail/triumphs%20> http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220505/b8a19d89/attachment.htm>