[TR] TR4A wiper arms fall off!

[David Porter]

I'm having a similar issue with the arm flying off a new wheel box. Will measure vs a stock one tomorrow. Just might be. Chinese measurements suck.

On August 28, 2022, at 6:52 PM, Dave Connitt <dconnitt at fuse.net> wrote:

Hi Darrell,
I think the knurled part of the wheel box may be too long to engage the little clip on the actual arm but I need to measure them both. 
Dave

Sent from my iPhone

> On Aug 28, 2022, at 5:42 PM, Darrell Walker <darrellw360 at mac.com> wrote:
> 
> 
> Hi Dave,
> 
> I’ll have to go look at mine, but IIRC there is a little tab that engages when they are fully seated.  Do your new arms have the tab?  Are they going on enough for it to engage?
> 
> -Darrell
> 
>> On Aug 28, 2022, at 12:33 PM, Dave Connitt <dconnitt at fuse.net> wrote:
>> 
>> Does anybody have any suggestions on how I can securely attach my new wiper arms to the wheel boxes?
>> Thanks in advance,
>> Dave Connitt 
>> 
>> Sent from my iPhone
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/darrellw360@mac.com
> 
> 
> 
> -- 
> Darrell Walker
> 66 TR4A IRS-SC CTC67956L
> 81 TR8 SATPZ458XBA406206
> Vancouver, WA, USA
> 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com