[TR] Ref incantation

[David Friedlander]

*"Once the engine/turns are paralleled they will slide together with no
issues."*

So, I have heard, Ed. It just has not yet worked out that way for me....



On Fri, Nov 12, 2021 at 2:23 PM Edward Hamer <hdrider570 at att.net> wrote:

> I have had this issue several times.  Tha input shift is not entering the
> pilot bearing.  The alignment has to be almost perfect.
>
> Use a couple of extra long bolts with the heads cut off.  Once the tranny
> is close walk around to the rear of the engine compartment and look down
> the firewall to see how well the Trans flange and the engine plate are
> aligned.
>
> I usually use a jack and a piece of wood under the oil pan to lift the
> rear of the engine up and place a long rod or similar under the rear of the
> Trans.  Once the engine/turns are paralleled they will slide together with
> no issues.
>
> Edward Hamer
> Petaluma CA
>
> Sent from my T-Mobile 5G Device
> Get Outlook for Android <https://aka.ms/AAb9ysg>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211112/d7f71222/attachment.htm>