[TR] TR4A trunk hinge question

[Cliff Hansen]

Dave,

Same thing happened to me with “new” hinges, bought them years ago, lasted about 6 months on the car.

Cliff


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

From: Jim Henningsen<mailto:trguy75 at gmail.com>
Sent: Wednesday, December 1, 2021 10:52 AM
To: Dave Connitt<mailto:dconnitt at fuse.net>
Cc: Triumphs<mailto:triumphs at autox.team.net>
Subject: Re: [TR] TR4A trunk hinge question

Dave,
A short while after installing a new trunk hinge, it broke.  I believe it’s cheap construction that caused it to break.  Mine broke in half.  Sounds like yours not too bad and job weld to the rescue.  Good luck.
Jim Henningsen
Ocala FL

> On Dec 1, 2021, at 12:11 PM, Dave Connitt <dconnitt at fuse.net> wrote:
>
> Thanks!
> JB Weld it is!
> Dave Connitt
>
> Sent from my iPhone
>
>> On Dec 1, 2021, at 11:44 AM, Notakitcar <notakitcar at yahoo.com> wrote:
>>
>> Agree, JB Weld will do the job.
>> Bill B
>> TS30800L
>>
>> -----Original Message-----
>> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of auprichard at uprichard.net
>> Sent: Wednesday, December 1, 2021 10:24 AM
>> To: 'Dave Connitt' <dconnitt at fuse.net>; 'Triumphs' <triumphs at autox.team.net>
>> Subject: Re: [TR] TR4A trunk hinge question
>>
>> I have had this happen a few times.  I have not had success with Locktite, but JB weld has worked.
>>
>> Andrew Uprichard
>> Jackson, Michigan
>>
>> -----Original Message-----
>> From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Dave Connitt
>> Sent: Wednesday, December 1, 2021 10:48 AM
>> To: Triumphs <triumphs at autox.team.net>
>> Subject: [TR] TR4A trunk hinge question
>>
>> Hi all,
>> It’s been some time since I have posted on this list but here goes.
>> During the restoration of my TR4A, I had purchased a new set of hinges for the trunk which was about 10 years ago.
>> After noticing one hinge coming apart I found that the short threaded stud one that hinge actually pulled itself out of the hinge.
>> Two questions:
>> 1. Is this a common failure mode?
>> 2. If I used red Locktite or JB Weld to secure the studs would they stay put?
>> Thanks,
>> Dave Connitt
>> DavesTR4A.com
>>
>> Sent from my iPhone
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
>>
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>>
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com
>>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/cliff_hansen@outlook.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211202/5fe6bfa3/attachment.htm>