[TR] Converting from DOT3 to DOT5 hydraulic fluid in my TR4A

[bill beecher]

Open each bleeder separately, pump out all you can then bleed each wheel till you see purple.   Some might disconnect at the MC and blow it out with air.   
Bill

Last night I saw upon the stair,
A little man who wasn't there,
He wasn't there again today
Oh, how I wish he'd go away.... Mearns

On Aug 20, 2021, at 6:28 PM, Dave Connitt <dconnitt at fuse.net> wrote:

Hi All,
What is the preferred way to convert from DOT3 to DOT5 hydraulic fluid in my TR4A. The clutch is going to be easy as the leaking master cylinder and slave are being replaced and the short hard and soft line will be fairly easy to flush. I need suggestions regarding the brakes.
Thanks,
Dave Connitt 

Sent from my iPhone
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/notakitcar@yahoo.com