[TR] bolt lengths used on Triumphs

[Frank Fisher]

 insert a piece of wire till it bottoms out.pinch, remove and measure.Frank
    On Wednesday, April 7, 2021, 09:58:02 AM PDT, Sujit Roy <triumphstag at gmail.com> wrote:  
 
 I need a bolt HB815 which is at 5/16 x 1 7/8" long. Rimmer and TRF list this no. under a 2 inch bolt. I'm assuming you can't get 1 /78" long bolt anymore. I tried fastenal and Bolt Depot. Not tried mcMaster carr. The last time I needed one of these I bought a 2" bolt and cut a bit of the end.I'm just wondering when a blind hole is drilled for a bolt, how much dead space is left at the end? Is there some rule of thumb?
Sujit

-- 
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210408/aed75189/attachment.htm>