[TR] TR6 GM Alternator Install

[Bob Danielson]

Might be something on my site that helps…
http://tr6.danielsonfamily.org/Alternator_Conversion_1.htm

Bob

Bob Danielson
TR6 Interior Panels, Boot Covers and Fender Blankets
http://tr6.danielsonfamily.org/PanelBootSales1.htm

From: Jim Henningsen
Sent: Tuesday, September 29, 2020 1:37 PM
To: 'Triumphs'
Subject: [TR] TR6 GM Alternator Install

I have a GM 10SI alternator installed on my 75 TR6.  I have an early
alternator bracket as I have the engine setup like an early TR6.  To make
the GM alternator line up with the water pump and crank pullies you need to
trim off some of the lower mounting ear on the alt.  Just curious has anyone
recorded the correct measurement width of the lower ear so it lines up
nicely.  
Thanks,
Jim Henningsen
Ocala, FL
61 TR3A
62 TR4
67 TR4A
75 TR6
81 TR8
 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/75tr6@tr6.danielsonfamily.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200929/ef47f9ed/attachment.htm>