[TR] Valve train noise

[Cliff Hansen]

Bob K,

Do you know of a source for a wire feeler gauge with 0.015” or 0.010”? I’ve looked, couldn’t find any. It seems the wire gauges are designed for plug gapping, and minimums are ~0.02”

Thanks,

Cliff



Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Kinderlehrer<mailto:kinderlehrer at comcast.net>
Sent: Friday, November 13, 2020 12:18 PM
To: 'Bob Nogueira'<mailto:nogera at hotmail.com>; 'Triumph List'<mailto:Triumphs at autox.team.net>
Subject: Re: [TR] Valve train noise

Could be those rockers. They can wear in the center where the push rods make
contact making a measurement with a flat feeler gauge inaccurate.
Bob

-----Original Message-----
From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Bob
Nogueira
Sent: Friday, November 13, 2020 10:54 AM
To: Triumph List
Subject: [TR] Valve train noise

Folk, a couple of years ago I did a total rebuild of my TR4 engine. It has
been running well but has the valves do make more noise than I experienced
in the past . Checking the valve clearance it is spot on. Once the engine
has been running for 30 to 45 minutes the noise is much louder.
Oil pressure is solid at 30 to 70 PSI. Engine temp stays at 170 (f). Oil is
20-50 Valvoline Racing Oil.
The rockers are from my spare engine. Head had all new valves (Stainless)
and New bronze guides which were reamed with a bit more tolerance. Re ground
cam and new lifters.
Any suggestions on tracking down the cause of the noise?

Bob Nogueira
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/kinderlehrer@comcast.net

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/cliff_hansen@outlook.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201113/b2cb3ccc/attachment.htm>