[TR] Copper v Steel Fig "8"

[Frank Fisher]

 i always give a good coat of hylomar
frank
    On Monday, June 29, 2020, 04:03:02 PM PDT, Jerry Van Vlack <jerryvv at roadrunner.com> wrote:  
 
 I've used both , never had an issue with either material. I do put a very 
light smear of sealer on them.

-----Original Message----- 
From: andrew uprichard
Sent: Monday, June 29, 2020 6:01 PM
To: 'bill beecher' ; 'Dave Ranteer'
Subject: Re: [TR] Copper v Steel Fig "8"

Since these gaskets have to make a seal, I have always preferred the copper
ones.  I know some people use sealer with the steel ones, but I have no
experience with them.

Andrew

-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of bill beecher
Sent: Monday, June 29, 2020 4:53 PM
To: Dave Ranteer <triumphs at autox.team.net>
Subject: [TR] Copper v Steel Fig "8"

Just received my 87mm pistons and liners from TRF, the package included
steel figure eight gaskets, my gasket kit from TRF included copper ones.  Is
there any consensus as to which is preferred?
Thanks,
Bill B
TS30800L

Serenity Now......
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com 

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200629/29378a97/attachment.htm>